The Spec Of Hospital Beds : 1. MB-888 rose redwood electric bed.
2. Electric medical bed equips with three motors. The head, leg and height can be single adjusted or all together. The mattress is waterproof, anti-bacteria and washable. With aluminum rails and thick board, the head and end are removable. High quality braking wheel. IV stand socke....
The Spec Of Hospital Beds : 1. Stove enamelled steel construction.
2. With upholstered cushion, I.V. rod and oxygen holder.
3. Four swival casters with brake.
The Spec Of Hospital Beds : Functions:
1. Hi-low: 35~88cm (±5%).
2. Back rise by 85° (±5%).
3. Foot rise by 40° (±5%).
The Spec Of Hospital Beds : 1. Frame: Made of steel with powder coating finish.
2. Sleep surface: split springs with zinc- plated finish.
3. With 3 motor operating independly.
4. Head portion: Electric adjustable from 0。~ 65.
5. Foot portion: Electric adjustable from 0。~ 45.
6. Hi/ Lo: manually with a single-crank.
7. Head/ foot portion....
The Spec Of Hospital Beds : 1. Footboard lift Crank: Hand screw is at end of bed, rotate the crank to ascend or descend within 0-40 degrees.
2. Folding pushing rod.
3. Drop Frame.
4. Backboard.
5. Tailor-made backboard can make X film.
6. Fixed Ring.
7. 5PC fixed rings were designed on the both sides of bed respectively for binding or hang ....
The Spec Of Hospital Beds : 1. Drop fame.
2. Backboard: tailor-made backboard can make X film.
3. Fixed ring: 5PC fixed rings were designed on the both sides of bed respectively for binding or hang articles.
4. Base cover: ABS plastic-steel cabinet base cover with articles tank.
5. Drainage bag clasp: 3PC drainage bag clasps were designed on ....
The Spec Of Hospital Beds : 1. Drop frame.
2. Base cover: ABS plastic-steel cabinet base cover with articles tank.
3. Drainage bag clasp: 3PC drainage bag clasps were designed on the both sides of bed respectively.
4. Fixed ring: 5PC fixed rings were designed on the both sides of bed respectively for binding or hang articles.
5. Crashworthy w....
The Spec Of Hospital Beds : 1. Complete unit is stainless steel.
2. Mattress is high density foam covered with ventilation.
3. Plastic leather, 2" thick.
4. With 6" casters.
The Spec Of Hospital Beds : 1. Complete unit is stainless steel.
2. Mattress is high density foam covered with ventilation plastic leather, 2" thick.
3. With 6" casters.
The Spec Of Hospital Beds : 1. Complete unit is stainless steel (Ascendable bed).
2. Mattress is high density foam covered with ventilation plastic leather, 2" thick.
3. With 6" casters.
The Spec Of Hospital Beds : 1. Complete unit is stainless steel.
2. Mattress is high density foam covered with ventilation plastic leather, 2" thick.
3. With 6" casters
The Spec Of Hospital Beds : 1. With drawer.
2. Complete unit is stainless steel.
3. Lower level with drawer.
The Spec Of Hospital Beds : 1. Hi- Low: By 27cm adjustable from 45cm to 72cm (±5%).
2. Back rise by 85° (±5%).
3. Foot rise by 40° (±5%).
4. Removable plastic head and foot board.
5. Standard accessories:
6. One-piece typed foldable side rail.
7. One table board.
8. Two sections I.V. stand.
9. 5" braking wheels.
The Spec Of Hospital Beds : 1. Head rise by 80°, foot rise by 40°.
2. Standard accessories.
3. One mattress.
4. Two section I.V. stand.
5. 5" wheel brake diagonally.
The Spec Of Hospital Beds : 1. Planar emergency pushing bed.
2. Folding pushing rod.
3. Drop frame.
4. Backboard.
5. Tailor-made backboard can make x film.
6. Fixed ring.
7. 5pc fixed rings were designed on the both sides of bed respectively for binding or hang articles.
8. Base cover.
9. Abs plastic-steel cabinet base cover with article....
The Spec Of Hospital Beds : 1. LED caution light.
2. Pushing bed has the function while movement forwards urgently. And put on the brake pedal when position bed, led caution light will go out; when not put on it or not position, Led caution light still light. It can avoid the danger of crash when position such as an ambulance
3. E200LED-B: str....
