Select
The Spec Of Electronic LEDs : 1. The series is specially designed for applications requiring higher brightness.
2. The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence. The mixture of blue light and yellow light results in white emission.
3. Utilizing advanced ....
Select
The Spec Of Electronic LEDs : 1. 1W High power LED with 150mA forward current and without aluminum plate, available in various colors.
2. Available colors: white, green, blue, red, yellow and orange 1. Forward voltage: 1.8 to 4.0V.
2. Forward current: 150mA.
3. Power: 1W.
4. Without aluminum plate.
5. Application: lighting source. ....
Select
The Spec Of Electronic LEDs : For signal light:
1. For the aforesaid specification, the brightness and other colors can be added according to the chips required by the customer.
2. The LED gel shape is available for change upon the requirement of the customer for changing the size of illumination angle.
3. Normally, this product uses DC current ....
Select
The Spec Of Electronic LEDs : 5mm cylindrical LED lamp series, used for display screen. 1. Type: LED lamp.
2. Forward current (mA): 20.
3. Lens color: color diffused.
4. Viewing angle: 120°.
5. Applications: for display screen.
6. Part No. RL40N-UR514S
(1) Wavelength: 635-645nm.
(2) Forward voltage (V): 1.7-2.8.
(3) Luminous intensity ....
Select
The Spec Of Electronic LEDs : 1. Use supper bright LED, low power consumption, long using life (Theory value: 5-10 years).
2. Use solid state seal, covered with PC material (not easy break up), Anti-ultraviolet, guard against high temperature, moisture and waterproof.
3. Inside drive controller, be provided that a lamp can shine with seven kinds ....
Select
The Spec Of Electronic LEDs : 1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25mm (.010)mm unless otherwise noted.
3. Protruded resin under flange is 1.0mm (.04)max. 1. Package: 3 Ø, 5 Ø.
2. Lens appearance: water clear.
3. Please refer to the attached file for detail information and spec. ....
Select
The Spec Of Electronic LEDs : 4 Flash Pattern: right, left alternate flash center, other alternative flash right arrow / left arrow flash. 1. Voltage: DC 12 / 24V.
2. Current: 1.2A - 3A. ....
Select
The Spec Of Electronic LEDs : 1. High brightness.
2. No RF and UV interference.
3. Mercury free.
4. Reduce heat generation.
5. No radio frequency.
6. No blinding.
7. >50% energy saving.
8. Certificate: CE and RoHS. 1. Power supply: 100, 110, 220 and 230V, 50/ 60Hz.
2. Wattage:
(1) A1: 69W.
(2) A2: 49W.
(3) A4: 21W.
(4) 320 x 3....
Select
The Spec Of Electronic LEDs : 1. Channel letters backlighting.
2. Landscape outlines.
3. Signal lighting.
4. Advertisement signs backlighting.
5. Advertisement light boxes and billboards backlighting. 1. LED type: 5050SMD.
2. LED quantity: 4 pieces.
3. Input voltage: 12V DC.
4. Protection grade: IP68.
5. Shapes: square.
6. Colo....
Select
The Spec Of Electronic LEDs : 1. Thru-hole LED: mainly used as various signal lamps, decoration lightings and outdoor big screen displays.
2. 850nm IR LED: mainly used on monitoring devices, such as CCD camera, day & night camera, CCTV camera. 1. Lens type: color diffused, color clear.
2. Emitting colors: red, green, blue. ....
Select
The Spec Of Electronic LEDs : 1.Axial type (1.7mm lamp).
2.Emitted color: red.
3.Resin color: water clear. 1.Peak wavelenght((nm)TYP IF=20mA): 660.
2.Characteristics:
a.VF (V) TYP. IF=20mA: 1.7.
b.IR (UA) MAX. VR=5V: 10.
3.Luminous intensity:
a.IV (mcd) IF=20mA(MIN): 0.8.
b.IV (mcd) IF=20mA (TYP.): 1.6. ....
Select
The Spec Of Electronic LEDs : 1. Character: material-In/Ga/N.
2. Description: 3mm-10mm blue LED lamp. Please refer to attached specifications and information. ....
Select
The Spec Of Electronic LEDs : 1. The series is specially designed for applications requiring higher brightness.
2. The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence. The mixture of blue light and yellow light results in white emission.
3. Utilizing advanced ....
Select
The Spec Of Electronic LEDs : 1. QA equipment.
2. Backlighting of LCD.
3. Automotive equipment.
4. Replacement of conventional light bulbs and fluorescent lamps.
5. Indoor and out door displays.etc. 1. Designed for high current operation.
2. Low thermal resistance.
3. Low profile.
4. Meets SAE/ECE/JIS automotive color requirements.
5. P....
Select
The Spec Of Electronic LEDs : 1. The LL-S192 SMD is much smaller than lead frame type components, thus enable smaller boad size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature applications and so forth. 1. 1.6mm x 0.8mm SMT LED, 0.6mm thickness.....
Select
The Spec Of Electronic LEDs : 1. Automotive: backlighting in dashboard and switch.
2. Telecommunication: indicator and backlighting in telephone and fax.
3. Flat backlight for LCD, switch and symbol.
4. General use. 1. 1.8mm * 0.8mm SMT LED, 0.6mm thickness
2. Low power consumption
3. Wide viewing angle
4. High efficient InGaN technology
....
Select
The Spec Of Electronic LEDs : 1. General lumination.
2. Decorative lighting.
3. Architectural lighting.
4. Back lighting.
5. Very long operating life. 1. Normal 10mm diameter package.
2. Available in 5500K white, green, blue, red, yellow.
3. Low voltage DC operated. ....
Select
The Spec Of Electronic LEDs : 1. The series is specially designed for applications requiring higher brightness.
2. The LED lamps are available with different colors, intensities.
3. The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence. The mixture of blue light....
Select
The Spec Of Electronic LEDs : 1. The series is specially designed for applications requiring higher brightness.
2. The LED lamps are vailable with different colors, intensities.
3. Utilizing advanced InGaN chip technology applications. 1. Standard T-1 diameter package.
2. Different viewing angle.
3. General purpose leads.
4. Delivery date....
Select
The Spec Of Electronic LEDs : 1. These high intensity blue LEDs are based on InGaN material technology.
2. InGaN is the most efficient and cost effective material for LEDs in the blue region of the spectrum.
3. The 470 nm typical dominant wavelength for blue are well suited to color mixing in full color signs. 1. Popular T-1 5mm diameter pa....
Select
The Spec Of Electronic LEDs : 1. These precision optical performance AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable.
2. AlInGaP LED technology provides extremely stable light output over long periods of time.
3. Precision optical performance lamps utilize the aluminum indium gallium p....
Select
The Spec Of Electronic LEDs : 1. These precision optical performance AlInGaP LEDs provide superior light output for excellent eadability in sunlight and are extremely reliable.
2. AlInGaP LED technology provides extremely stable light output over long periods of time.
3. Precision optical performance lamps utilize the aluminum indium gallium ph....
Select
The Spec Of Electronic LEDs : 1. Character: material-InGaN.
2. Description: 3mm--10mm white LED lamp. Please refer to attached specifications and information. ....
Select
The Spec Of Electronic LEDs : 1. Color: red, yellow, green, orange, blue, white.
2. View angle: 8, 15, 20, 30, 45, 100 deg.
3. Lens color: water clear. 1. Description: 3mm~10mm white LED lamp.
2. Type: 3mm, 4mm, 5mm, 8mm, 10mm oval. ....
Select
The Spec Of Electronic LEDs : 1. Description: 3mm--10mm white LED lamp.
2. Type: round, cylindrical, rectangular, triangular, step. 1. Color: red, yellow, green, orange, blue, white, pink, violet.
2. View angle: 8, 15, 20, 30, 45, 60 deg.
3. Lens color: water clear, diffused, transparent. ....
Select
The Spec Of Electronic LEDs : 1. Part no: B3N-145R/H302, B3N-143/H302, B3N-144/H302, B3N-145/H302.
2. Material+ emitted color: GaAsP/GaP, GaP, GaAsP/GaP, GaAsP/GaP.
3. Lens color: red diffused, green diffused, yellow diffused, orange diffused. 1. Dimension: T-1(3mm).
2. Wave length(nm): 635, 565, 585, 630.
3. Luminous intensity(mcd) min-typ....
Select
The Spec Of Electronic LEDs : Description: housing LED. 1. Outline: round 3mm, 5mm.
2. Color: bi-color, full color, etc.
3. Lens color: water clear, diffused. ....
Select
The Spec Of Electronic LEDs : 1. Color: bi-color, full color, etc.
2. Outline: round 3mm, 5mm.
3. Lens color: water clear, diffused. Please refer to attached specifications and information. ....
Select
The Spec Of Electronic LEDs : 1. Type: round, cylindrical, rectangular, triangular, step.
2. Color: red, yellow, orange, green, blue, white, pink, violet. 1. View angle: 8, 15, 20, 30, 45, 60 deg.
2. Lens color: water clear, diffused, transparent. ....
Select
The Spec Of Electronic LEDs : 1. Description: full color LED.
2. Character: material-AlGaInP/InGaN. 1. Diameter: T1-3/4 (5mm).
2. 4 pin. ....