For gases, pressurized gases (oxygen, air ect.) and low viscosity liquids up to 60 degrees celcius, with liquid filling for measurement points subject to vibrations and high dynamic pressure loads, no formation of condensation.
Pressure Gauge is all hand made, which requires delicate technique to maintain it's accuracy. It also has different fitting for your choice, like DU, BT, AT and ect.
Specifications:
1. Dial diameter: 2 inch.
2. Pressure range: 0~60psi or 0~100psi or 0~160psi.
3. Housing: black-painted steel.
4. Ring: none.
5. Lens: acrylic.
6. Stem with release button & straight chuck.
7. Handy series.
1. G20 series gauges are used to monitor pressure of regulators and systems.
2. 2" gauge are available in 316 stainless steel, all gauges have 1/4 NPT male bottom connection and an accuracy of 20% of full scale.
1. Product name: air and water pressure gauges .
2. Product No.: P-A.
It can be used with gas or liquid media, especially in vibrations environment or high pressure. It is suitable for pneumatic and hydraulic systems, like compressor, pump, FRL, regulator, spray gun, valve.
For corrosive environment and fiuids, can be used on equipments with vibrations and high dynamic pressure loads, no formation of condensation. Such as food processing and petrochemical equipments.
For corrosive environment and fiuids, can be used on equipments with vibrations and high dynamic pressure loads, no formation of condensation. Such as food processing and petrochemical equipments.
For corrosive environment and fiuids, can be used on equipments with vibrations and high dynamic pressure loads, no formation of condensation. Such as food processing and petrochemical equipments.
For corrosive environment and fiuids, can be used on equipments with vibrations and high dynamic pressure loads, no formation of condensation. Such as food processing and petrochemical equipments.
With magnetically assisted contact, designed to prevent damage from high dynamic pressureload to circular contact.
With magnetically assisted contact, designed to prevent damage from high dynamic pressureload to circular contact.
1. For corrosive atmospheres and fiuids, resistant to high dynamic presure loads and vibrations.
2. Well suited for the process industry applications inluding: Petrochemical, Chemical plants, and energy etc.
Suitable for liquids and gasses that are corrosive and aggresive. This section contains bottom flanges for pressure gauges with diaphragms for special sonditions and substances. Such as chemical and petrochemical industries.
Specialized used in PCB/LCD, high-tech zone, IC equipments, pipe-Line ins-tallation and the internal outfit of dust-free chamber with all in one case cover-ed around in order to its unbreakable function and excellent efficacy of anti-corrosivesion
Specialized used in PCB/LCD, high-tech zone, IC equipments, pipe-Line ins-tallation and the internal outfit of dust-free chamber with all in one case cover-ed around in order to its unbreakable function and excellent efficacy of anti-corrosivesion.
1. For corrosive atmospheres and fiuids, resistant to high dynamic presure loads and vibrations.
2. Well suited for the process industry applications inluding: Petrochemical, Chemical plants, and energy etc.
1. For corrosive atmospheres and fiuids, resistant to high dynamic presure loads and vibrations.
2. Well suited for the process industry applications inluding: Petrochemical, Chemical plants, and energy etc.
1. For corrosive atmospheres and fiuids, resistant to high dynamic presure loads and vibrations.
2. Well suited for the process industry applications inluding: Petrochemical, Chemical plants, and energy etc.
With magnetically assisted contact, designed to prevent damage from high dynamic pressureload to circular contact.
3'' ELECTRICAL GAUGES Digital LCD shows reading, self-adjustment (return to zero automatically) offer switch units, MPA-BAR-PSI8-24V-DC connect outer electric power for general pressure monitoring with NPN or PNP connection controc.
For filter and pump control on liquied and gases. Housing in all PP material can resist transient overpressure and maintain leaktight connection. It is also designed to satisfy requirements in corrosive atmosphere & fluids.
For filter and pump control on liquied and gases. Housing in all PP material can resist transient overpressure and maintain leaktight connection. It is also designed to satisfy requirements in corrosive atmosphere & fluids.
Suitable for liquids and gasses that are corrosive and aggresive. This section contains bottom flanges for pressure gauges with diaphragms for special sonditions and substances. Such as chemical and petrochemical industries.
For gases, pressurized gases (oxygen, air ect.) and low viscosity liquids up to 60 degrees celcius, with liquid filling for measurement points subject to vibrations and high dynamic pressure loads, no formation of condensation.
This industrial pressure gauge is designed for fluid medium which does not clog connection or corrode copper alloy and gas processes compatible with cupreous metals of the sensing element and connection. Field include: Penumatics, hydraulics, compressors, mechanical and energy system engineering, heating, ventilation, ....
This industrial pressure gauge is designed for fluid medium which does not clog connection or corrode brass alloy. Also for gas compatible with cupreous metals of the sensing element and connection. Field include: Penumatics, hydraulics, compressors, mechanical and energy system engineering, heating, ventilation, air c....
This industrial pressure gauge is designed for fluid medium which does not clog connection or corrode brass alloy. Also for gas compatible with cupreous metals of the sensing element and connection. Field include: Penumatics, hydraulics, compressors, mechanical and energy system engineering, heating, ventilation, air c....
For gases, pressurized gases (oxygen, air ect.) and low viscosity liquids up to 60 degrees celcius, with liquid filling for measurement points subject to vibrations and high dynamic pressure loads, no formation of condensation.
For gases, pressurized gases (oxygen, air ect.) and low viscosity liquids up to 60 degrees celcius, with liquid filling for measurement points subject to vibrations and high dynamic pressure loads, no formation of condensation.
