The Spec Of Sensor : Applications: Temperature sensors, thermocouple wire and metal-sheathed, mineral insulated cable for temperature sensing applications in plastics manufacturing, chemical processing, packaging, HVAC, heat treating, food processing, primary metals, bio-medical, aerospace, and more.
The Spec Of Sensor : 1. DHCT-G: 38(L) x 28(W) x 18(H) mm / 46g approx. - Aperture size: 20mm (L) x 10mm (W).
2. DHCT-B: 40(L) x 30(W) x 20(H) mm / 49g approx. - Aperture size: 20.4mm (L) x 10mm (W).
3. DHCT-M: 170(L) x 102(W) x 20(H) mm / 500g approx. - Aperture size: 85mm (L) x 27mm (W).
The Spec Of Sensor : Intro:
JH-MC01 door/ windows detector is used to install door/ windows
give off alarm signal.
The Spec Of Sensor : KGN photoelectric sensor vision system:
KGN fiber optic cables for detecting wafer, detecting defective condenser, detecting PCB, works detection, detecting lamp position, detecting CD-ROM direction, detecting defective PCB, detecting IC lead frame, detecting LCD glass board.
The Spec Of Sensor : 1. IR-TEC LC-366 is a ready-to-use Passive Infrared SenSwitch for motion activated operation control of OEM lightings, motors, fans or ventilators.
2. This PIR sensor -switch detects the human body motion within its detection range and switch on and off the connected load automatically.
3. Typical applications includ....
The Spec Of Sensor : 1. If two wires of different materials are joined at one point and then subjected to a temperature, then a voltage difference will be generated between the open ends of the two wires. In order to be able to measure the temperature at the junction, the temperature at the open end must be known. If the temperature of the....
The Spec Of Sensor : Adjustable sensitivity.
The Spec Of Sensor : The E20 silicon pyranometer is designed for routine measurement of solar radiation. The E 20 uses silicon photodiode detector to measure the solar energy received from the sunlight.
The Spec Of Sensor : 1. SpO2 sensor /probe, adult finger clip to 5 pin redel connector.
2. Connector: mindray.
The Spec Of Sensor : 1. A miniaturized sensor switch.
2. Sensor switch: 10x4.8mm H=10.0mm.
The Spec Of Sensor : 1. Applications:
(1) Horizontal tilt detecting.
(2) Vertical rotation detecting.
(3) Shock detecting.
2. Features:
(1) Miniature size, compact space, and innovation wing-typed terminal designed, making install space minimum above the print circuit board.
(2) Special structures which increase strength between ho....
The Spec Of Sensor : 1. Negative signal output.
2. Microwave movement detector.
3. One zone.
4. L.E.D test indicator.
5. Pre-wired female plug.
The Spec Of Sensor : 1. LC-780 series is a wide angle passive infrared SenSwitch designed to control indoor or outdoor lighting by sensing the presence of human body.
2. Its unique mechanism design make it able to be mounted on the wall or ceiling. The adjustable sensor head provides easy mounting site selection and optimum detection adj....
The Spec Of Sensor : 1. LC-720 is a passive infrared SenSwitch designed for indoor / outdoor lighting control by sensing the presence of human body. Its unique mechanism design allows it to be mounted on the ceiling or wall.
2. The sensor head can be adjusted vertically or horizontally to provide easy adjustment of detection coverage. L....
The Spec Of Sensor : 1. Adjustable TIME control.
2. Surface mount technology.
3. LC-770 is an innovative passive infrared SenSwitch designed to mount with single wall switch box. This unit can be mounted on the single gang box with 83.5mm screw pitch.
4. By utilizing IR-TEC's patented 2-wire power supply technology.
5. LC-770 is abl....
The Spec Of Sensor : 1. The OS-363 is a ceiling mount occupancy sensor for automatic operation control of HVAC device. This sensor provides 360 degree omni-directional occupancy detection of individual rooms or open areas.
2. An innovative dual delay processor makes this sensor smart enough to verify the nature of occupancies.
This cou....
The Spec Of Sensor : 1. The OS-362D is a ceiling mount duplex occupancy sensor for automatic operation control of HVAC and Lighting. This sensor provides 360 degree omni-directional occupancy detection of individual rooms or open areas.
2. An innovative dual delay processor makes this sensor smart enough to verify the nature of occupanci....
The Spec Of Sensor : 1. The OS-730D is an occupancy sensor developed for automatic control of HVAC operation. This sensor is designed for recess mounting with EIA standard single gang box with 83.5 mm screw pitch.
2. An innovative dual delay processor makes this sensor smart enough to verify the nature of occupancies. In addition to the ....
The Spec Of Sensor : 1. The OS-550T is an occupancy sensor designed for automatic operation control of HVAC system. This occupancy sensor delivers a changeover relay contact output to control the HVAC operation according to the occupancy status of the area.
2. In addition to all standard features of OS-550, this sensor provides high/low ....
The Spec Of Sensor : 1. The OS-750D is an occupancy sensor developed for automatic control of HVAC operation. This sensor is designed for recess mounting with EURO standard
single switch box with 60.0 mm screw pitch.
2. An innovative dual delay processor makes this sensor smart enough to verify the nature of occupancies. In addition to....
The Spec Of Sensor : 1. The OS-550 is an occupancy sensor developed for automatic control of HVAC ventilation. This sensor is designed for wall or ceiling mounting with mounting bracket.
2. An innovative dual delay processor makes this sensor smart enough to verify the nature of occupancies. This could eliminate unnecessary actuations of....
The Spec Of Sensor : 1. HEM-550 is the master sensor of HEM-1 guestroom HVAC energy Management System. This is not only an occupancy sensor , but also
a signal processor of the system.
2. With integration of various signals and logic sequence analysis, this sensor is able to verify the actual occupancy status of the room without detecti....
The Spec Of Sensor : 1. HEM-1 is an occupancy-oriented HVAC energy management system specially designed for lodging industry. By utilizing an advanced occupancy sensing technology, this system is able to control the guestroom HVAC operation according to the occupancy status.
2. An advanced microprocessor and sophisticated logic control s....
The Spec Of Sensor : 1. HEM-2 is an occupancy-oriented HVAC energy management system specially designed for lodging industry. By utilizing an advanced occupancy sensing technology, this system offers automatic control of the guestroom HVAC operation according to the occupancy status.
2. A high sensitivity occupancy sensor verifies the oc....
The Spec Of Sensor : 1. HEM-550E is the master sensor of HEM-2 Guestroom HVAC Energy Management System. This is not only an occupancy sensor , but also a signal processor of the system.
2. With superior detection capability, this sensor is able to detect the slightest movement of hotel guest.
3. When guestroom is physically occupied, the....
The Spec Of Sensor : MS-360 is a low cost, ready-to-use passive infrared motion sensor module designed to integrate with motion activated product for OEM manufacturer. This sensor module generates 5V digital signal output when it detects human body motion within its detection range.
A mini-dome lens is equipped with the module to provide....
The Spec Of Sensor : 1. MS-900 is a 5 VDC operation passive infrared motion sensor specially designed for OEM system manufacturers. This motion sensor provides digital signal output when it detects human body motion within its detection range.
2. A unique snap-lock mounting plate makes the installation an easy job. For building energy co....
The Spec Of Sensor : 1. MS-780 is a wide angle, long range passive infrared motion sensor specially designed for various OEM system applications. This sensor provides digital signal output when it detects human body motion within its detection range.
2. Unique mechanical design allows this sensor to be mounted on the wall or ceiling. IP-....
The Spec Of Sensor : 1. LX-250 is a dual purpose motion sensor designed for the control networks based on LonWorks building network technology. This sensor offers different levels of detection algorithms for working with occupancy or intrusion detection.
2. LX-250 contains a 3120 Neuron Chip and FTT-10A free topology transceiver for netw....
The Spec Of Sensor : MS-360LP is a multi-purpose, low power passive infrared motion sensor module designed for OEM integration. This sensor provides digital signal output whenever it detects human body movement within its detection range. With its built-in dome lens, the sensor can be used in ceiling mount products that require 360 degree ....
