The Spec Of Lathe Machine Tools : 1. Single central positioned spindle (fixed), with two turrets and twin CNC control system. Twin turret can operate simultaneously and carry out different cutting on each ends.
2. Shaft, rod or tubes both ends cutting (O.D. or I.D.) are carried out simultaneously to obtain very high concentricity and efficiency.
Sp....
The Spec Of Lathe Machine Tools : A combination of a high precision manual lathe plus a lathe with digital readout, powerfeed and JOG modes, teach modes for CNC and CNC capability.
The Spec Of Lathe Machine Tools : 1. Pass the highest quailty restriction.
2. Provide all kinds of services after the automatic CNC lathe machine has been sold.
The Spec Of Lathe Machine Tools : 1. Description:
(1) Unsurprssed high speed.
(2) High performance and high precision.
2. Features:
(1) Swing over bed ø 450mm.
(2) Max. turning diameter ø 250mm.
(3) Max. turning length ø 600mm.
(4) Choice of 8, 12, 23 station turret or power turret.
(5) Modular design provides variety of options for cost e....
The Spec Of Lathe Machine Tools : 1. The sub-spindle is suitable for back side machining which saves time in secondary machining.
2. The sub-spindle accommodates a 6" 3-jaw chuck or a collet chuck.
3. The two-spindle series feature high spindle speed,fine precision and excellent efficiency.
4. 12-position turret.
The Spec Of Lathe Machine Tools : Model No: KT-15 pneumatic head lathe.
Specification:
1. Workpiece diameter: 1 / 4 H ~ 5 / 16 H.
2. Workpiece length: 25~ 50mm.
3. Workpiece Type: Hex/ Round.
4. Collet chuck: 15.
The Spec Of Lathe Machine Tools : 1. 280mm (11") swing over bed.
2. 457mm (18") distance between centers.
3. Dual range inch/metric quick change gearbox.
4. Infinitely variable spindle speeds from 0-4000 RPM
5. Full bearing carriage with turcite-b slideway bearing material between carriage and bed.
6. The spindle is mounted in high ....
The Spec Of Lathe Machine Tools : Description of standard accessories:
1. Full length enclosure VMC-84, VMC-115.
2. Splash table guard VMC-136, VMC-158, VMC-199, VMC-229, AF-8.
3. Remote manual pulse generator (M.P.G.).
4. Oil & coolant separator.
5. Automatic lubrication system.
6. Taper air through spindle.
7. Collant unit.
8. Spindl....
The Spec Of Lathe Machine Tools : 1. High precision processing within 0.009mm for both roundness and surface precision.
2. Easy to connect with automatic bar feeder, robot loading system or manual loading jobs.
3. Capacities:
(1) Collet bar capacity, dia.(through bore): Ø36 (1.42").
(2) Swing over bad: Ø150 (Ø5.9").
(3) Swing over a....
The Spec Of Lathe Machine Tools : 1. Flat bed type: 40NC/60NC/80NC.
2. Swing over bed: 400mm(17-5/16").
3. Distance between centers: 1000mm(40"), 1500mm(60"), 2000mm (80").
4. Swing over gap: 660mm(26")
The Spec Of Lathe Machine Tools : 1. High efficiency, high precision, user friendly, low cost.
2. Install automatic bar feeder or auto-loading and unloading system to improve efficiency.
3. X, Z slide way with heat treatment and turcite B.
4. High precision X,Z-axis ballscrew c3 class.
The Spec Of Lathe Machine Tools : 1. Efficient, accurate power turret (optional):
(1) The electric H4 turret is driven by a worm gear/worm wheel mechanism for convenient tool change. It is powered by a 375 W. motor with great clamping force up to 1 ton.
(2) Specially designed post body prevents coolant and chips getting into post. Body will not move....
The Spec Of Lathe Machine Tools : Offering the most solid base to process up tp 750mm turning length, bar capacity up to 51mm and swing up to 525mm over bed. the USOCA USK-2 series provide the best possible results for CNC lathes operation. The sturdy 30 degree slant bed provides a vibration free operation to the machine.
The Spec Of Lathe Machine Tools : 1. CNC heavy duty lathe.
2. CNC oil country lathe.
The Spec Of Lathe Machine Tools : N/A
The Spec Of Lathe Machine Tools : 1. Working width: 3 x 6 FT~ 4 x 8 FT.
2. Jaw opening: 870~1200mm.
3. Overturning drive motor: 2 HP x 1 set.
4. Left-right rotation drive motor: 1/2 HP x 1 set.
5. Hydraulic pump motor: 2 HP x 1 set.
The Spec Of Lathe Machine Tools : Sliding head type GNP-1724-D:
1. Opposed gang-type toolpost structure enables high-speed tool selection due to the short tool changing stroke.
2. High-precision machining is possible by the rigid gang-type toolpost.
3. Stabilized spindle rotation is guaranteed by the built-in spindle motor.
4. Reference-point r....
The Spec Of Lathe Machine Tools : It especially apply for long bar or shart machining. Not only incressed the efficiency but also enlarge the function.
The Spec Of Lathe Machine Tools : 1. Turning length up to 100mm.
2. 4 spindle speeds: 557/894/1379/2364 rpm.
3. 2 hp motor.
The Spec Of Lathe Machine Tools : 1. The smallest model among senday bench lathes.
2. 3 spindle speeds: 1118/1720/2800 rpm.
3. 1 hp motor.
The Spec Of Lathe Machine Tools : We have successfully developed various models of CNC lathes and Bench Lathe that incorporate the latest ideas. Senday's outstanding technical sized by the customers both in domestic and overseas.
The Spec Of Lathe Machine Tools : 1. All SENDAY hand operated bench lathes are available in a conventional bench lathe version.
2. The version model is well suited for small lot product, with various sizes.
3. Headstock mounted with 3 jaw scroll chuck, in stead of collet chuck. Chuck sizes 5".
The Spec Of Lathe Machine Tools : It especially apply for long bar or short machining. Not only increased the efficiency but also enlarge the function.
The Spec Of Lathe Machine Tools : 1. All SENDAY hand operated bench lathes are available in a conventional bench lathe version.
2. The version model is well suited for small lot product, with various sizes. Headstock mounted with 3 jaw scroll chuck, in stead of collet chuck. Chuck sizes 5". Slide table driven by feed screw shaft. Cross travel 11....
The Spec Of Lathe Machine Tools : 1. Pass the highest quailty restriction.
2. Provide all kinds of services after the automatic CNC lathe machine has been sold.
The Spec Of Lathe Machine Tools : 1. Pass the highest quailty restriction.
2. Provide all kinds of services after the automatic CNC lathe machine has been sold.
The Spec Of Lathe Machine Tools : 1. Pass the highest quailty restriction.
2. Provide all kinds of services after the automatic CNC lathe machine has been sold.
The Spec Of Lathe Machine Tools : A combination of a high precision manual lathe plus a lathe with digital readout, powerfeed and JOG modes, teach modes for CNC and CNC capability.
The Spec Of Lathe Machine Tools : The SMART series has a 20" slant bed structure. This not only facilitates chip disposal, but also easy access to the workpiece. This CNC automatic lathe is designed and engineered for upgrading productivity and creating machining profits. The entire machine is precision constructed throughout for outstanding cutti....
The Spec Of Lathe Machine Tools : The SHARP series CNC lathe has a 45" slant bed, featuring powerful cutting, high torque output, and extra rigid structure. It prevents deformation on the bed and assures high stability while heavy duty machining. The slant bed design facilitates too mounting, change and inspection. Precision ball screws on two axe....
