The Spec Of Metal Lathes : 1. Description:
(1) Vertical wheel turning lathe is specially designed to not only satisfy the need for high efficient production by after market wheel manufacturers but also OEM customers.
(2) The WVL-F24A has competitive advantages in both the capability and price.
(3) The switch from horizontal wheel turning to....
The Spec Of Metal Lathes : 1. Soft jaw for hydraulic chuck.
2. Soft jaw for CNC lathe.
The Spec Of Metal Lathes : 1. The sub-spindle is suitable for back side machining which saves time in secondary machining.
2. The sub-spindle accommodates a 6" 3-jaw chuck or a collet chuck.
3. The two-spindle series feature high spindle speed,fine precision and excellent efficiency.
4. 12-position turret.
The Spec Of Metal Lathes : 1. Max. swing: 637mm.
2. Bar capacity: 77mm.
3. X axis travel: 225+15mm.
The Spec Of Metal Lathes : 1. Capacities:
(1) Collet bar capacity, dia.(through bore): Ø36 (1.42").
(2) Max. turning length: 120 (4.72").
2. Spindle:
(1) Center height of spindle (approx.): 1,000 (39.37").
(2) Collet chuck type: F42.
(3) Power of spindle motor: 5.5/7.5kw (7.5/10HP).
(4) Max. spindle speed: 6,000rpm.
3. Co....
The Spec Of Metal Lathes : A combination of a high precision manual lathe plus a lathe with digital readout, powerfeed and JOG modes, teach modes for CNC and CNC capability.
The Spec Of Metal Lathes : 1. Single central positioned spindle (fixed), with two turrets and twin CNC control system. Twin turret can operate simultaneously and carry out different cutting on each ends.
2. Shaft, rod or tubes both ends cutting (O.D. or I.D.) are carried out simultaneously to obtain very high concentricity and efficiency.
Sp....
The Spec Of Metal Lathes : 1. With the increasing demand for bigger and bigger alloy wheel manufacturing. Victor has come up with an alternative solution for easier loading/unloading wheels and further reduces the spindle idle time.
2. Victor Vturn-V24W lathes are built from with new innovation to provide a 4 axis vertical CNC lathe specifical....
The Spec Of Metal Lathes : 1. 280mm (11") swing over bed.
2. 457mm (18") distance between centers.
3. Dual range inch/metric quick change gearbox.
4. Infinitely variable spindle speeds from 0-4000 RPM
5. Full bearing carriage with turcite-b slideway bearing material between carriage and bed.
6. The spindle is mounted in high ....
The Spec Of Metal Lathes : 1. Pass the highest quailty restriction.
2. Provide all kinds of services after the automatic CNC lathe machine has been sold.
The Spec Of Metal Lathes : Production expands the metal network, for instance: fhombus network, hexagon network, special design network, etc.
The Spec Of Metal Lathes : Description of standard accessories:
1. Full length enclosure VMC-84, VMC-115.
2. Splash table guard VMC-136, VMC-158, VMC-199, VMC-229, AF-8.
3. Remote manual pulse generator (M.P.G.).
4. Oil & coolant separator.
5. Automatic lubrication system.
6. Taper air through spindle.
7. Collant unit.
8. Spindl....
The Spec Of Metal Lathes : Max. capacity:
(1) Round: 42 mm.
(2) Hexagon: 35 mm.
(3) Square: 30 mm.
The Spec Of Metal Lathes : N/A
The Spec Of Metal Lathes : 1. Products name: CNC lathes.
2. 104 mm series "N".
The Spec Of Metal Lathes : 1. Product name: CNC lathes.
2. 156 mm series "GL".
The Spec Of Metal Lathes : 1. Product name: CNC heavy duty lathes.
2. Product No.: TNC600.
The Spec Of Metal Lathes : 1. Product name: CNC oil country lathe.
2. Product No.: TNC 960X x 4000.
The Spec Of Metal Lathes : 1. Gripping accuracy of 0.03mm(0.0012inch) T.I.R.
2. Standard accessoriesA chuck wrench and hex. key.One set of mounting bolts.(UNC-bolts)
3. The body is made of MEEHANITE. It is suitably used for high speed revolution and 3 times more durable than regular chucks.
The Spec Of Metal Lathes : 1. Gripping accuracy of 0.03mm (0.0012inch)T.I.R.
2. Standard accessoriesA chuck wrench and hex. key.One set of mounting bolts. (UNC-bolts)
3. The body is made of MEEHANITE. It is suitably used for high speed revolution and 3 times more durable than regular chucks.
The Spec Of Metal Lathes : 1. SE types are specially suit for drilling, endmilling, tapping or grinding in tool grinders.
2. Hung bore diameter design for wider application of bar workpieces.
3. SE type feature gripping for thin tube and high roundness accuracy.
4. The body is made of MEEHANITE. It is suitably used for high speed revolution....
The Spec Of Metal Lathes : 1. Gripping of square or octagonal workpieces could fit into central line automatically.
2. SIC have high stability in gripping thin tube work piece.
3. The specification is the same as SC type.
4. The body is made of MEEHANITE. It is suitably used for high speed revolution and 3 times more durable than regula....
The Spec Of Metal Lathes : 1. Hard jaws are adopted for square for square or octagonal thin tube workpieces machining.
2. Sofe jaws could grip rectangular workpiece after being unisotropic machined.
3. The specification is the same as SK type.
4. The body is made of MEEHANITE. It is suitably used for high speed revolution and 3 times more du....
The Spec Of Metal Lathes : 1. SK types chucks have wider unilization range; hard jaws suitable for heavy cutting; soft jaws suitable for light and precision cutting.
2. Hard jaws could be used as internal jaws and external jaws.
3. Gripping accuracy of 0.03mm (0.012 inch)T.I.R.
4. The body is made of MEEHANITE. It is suitably used for high....
The Spec Of Metal Lathes : 1. Soft jaws for strong scroll chuck.
2. Manufactured in special specification.
The Spec Of Metal Lathes : Max. dia of processing.
(1) Round: 15 mm.
(2) Hexagon: 12 mm.
(3) Square: 10 mm.
The Spec Of Metal Lathes : Max. capacity:
(1) Round: 25 mm.
(2) Hexagon: 22 mm.
(3) Square: 18 mm.
The Spec Of Metal Lathes : 1. Swing over bed: 300 mm.
2. Overall length of bed: 954 mm.
3. Width of bed: 120 mm.
4. Cross slide-max. travel: 110 mm.
5. Turret slide-max. useful stroke: 110 mm.
The Spec Of Metal Lathes : 1. Swing over bed: 830 mm.
2. Swing over cross slide: 600 mm.
The Spec Of Metal Lathes : A combination of a high precision manual lathe plus a lathe with digital readout, powerfeed and JOG modes, teach modes for CNC and CNC capability.
