The Spec Of Shoes Making Machines : Model NC-305(A) Hydraulic cutting machine adopts completely the full oil hydraulic control system. The specially designed hydraulic circuits are easy to operate and maintain. Increasing invariably the productivity for its users, it is a useful machine designed for various workpieces in need of mold cuttings, such as le....
The Spec Of Shoes Making Machines : 1. Curved ranged, use smallest space. Easy to maintain and operate. The shortest moving distance of injection system, machine parts rare scuffed to extend machine's life and reduce the cost of repair and maintain.
2. Curved mold station range, turntable type injection base moving device, moving quickly, location prec....
The Spec Of Shoes Making Machines : This machines is used for the lasting operation of the upper's forepart, and equipped with the applicator, 9 pincers. The rod cement of polyester or polyamide is designed for using, which ensures higher flexibility.
The Spec Of Shoes Making Machines : Coarsening rubber sole of working shose or any-kind,one by one to make suface roughing ready for gluing.
The Spec Of Shoes Making Machines : 1. Unique design for ultra high velocity air recirculation to provide very rapid and effective cool down of shoe and lasts.
2. Purpose designed high power chillier unit.it can provide rapidly to cool down the temperature to setting point.
3. Electronic variable speed belt and it's movement by air pneumatic.
4. Ful....
The Spec Of Shoes Making Machines : 1. The IT-5000 press has been realized to better the phase of coupling of lining upper and toe-puff by the heat pressing of the upper.
2. Hot cylinder mold enable the upper to a last profile,for easy to lasting and highs productivity, high quality.
3. A lining pulling design, ensure no wrinkle and pleats in the upper....
The Spec Of Shoes Making Machines : 1. Gluing of shoes upper lining, toe puff and parts of handbags and leather goods.
2. Mode IT-5100P secures a quick and careful application of water based glue.
3. It can replace the brush application reduicng, in drastic way, the working times and permitting you to save also the glues (about 3 times).
4. Needless p....
The Spec Of Shoes Making Machines : 1. Toe cap pre-moulding before forming.
2. Apply to any toe puff, best if use thermoplastic film.
3. Steady claw and aiming light provide accurate moulding position.
4. Pressing device of horizontal outer mould makes the toe cap moulded solid.
5. Multi-optional released claw is suitable for different shoes.
6. Ens....
The Spec Of Shoes Making Machines : 1. Stitch-down toe upper preshaped.
2. Applicable for any material of upper and lining.
3. Ensure no wrinkle & pleat in the lining after moulded.
4. Custom-made last mould offers the highest accuracy.
5. The best accuracy of upper stitch-down is available with our patented cold clamp plate design.
6. Adjustable mo....
The Spec Of Shoes Making Machines : 1. Applicable for any toe-puff material, especially suitable for thermoplastic material.
2. Apply pressure on outer mould to allow a shaping result of shoe upper.
3. Shoe upper positioning board device to allow more accurate and convenient placing of shoe upper. The operation is thus made easier and more accurate.
4....
The Spec Of Shoes Making Machines : 1. With auto controller temperature.
2. Auto-supply, steady product and protect operator.
3. Auto-adjustment belt no slide.
4. Adjustable speed suit any kind of product.
5. Can stead of sewing.
6. Laminiated products no transform, no bubble,up quality.
7. Suit any kind of material.
8. Save Labor, save time, smal....
The Spec Of Shoes Making Machines : 1. Shaft molding for jackboots or roller skate.
2. Round tube moulding for shaft with heavy lining.
3. Through fast and extreme heating & Cooling system, the upper shaft and inner shaft lining are pressed tightly and smoothed inner wrinkless to improve comfort fitting.
4. After moulding the stretched shaft is not av....
The Spec Of Shoes Making Machines : 1. Grind roughly, solid lasting, massage backpart, quarter, upper, toe, top line, removing from angle condition.
2. It contains five parts:
a. Grinder: grind the relief upper under the insole, non-use of knife
b. High speed wheel: press the upper of insole to affix with last avoiding deformation.
c. Massage stick: ....
The Spec Of Shoes Making Machines : 1. Pre-moulding of backpart.
2. Re-shaping of backpart & top line.
3. Heat mould of heat-resistant silicon.
4. The temperature of both the inner and outer mould can be adjusted individually ( depended on the material ).
5. Perfect effect & speed are obtained from cool mould after heating.
6. After moulding, the co....
The Spec Of Shoes Making Machines : 1. Apply to any toe puff material, best if use thermoplastic film.
2. Attached heat oven to increase output and short the heating time.
3. After pre-moulding of toe cap, the shoe last insertion is more easier.
4. After moulding, the upper and lining will be adhered tightly to ensure no wrinkle & pleat happened.
5. ....
The Spec Of Shoes Making Machines : 1. Sticking the insole, sticking the foot pad.
2. The thermoplastic material is less expensive than nails.
3. It eliminates the operation of removing nails.
4. Lasts will not be damaged.
5. It eliminates the possibility of nails left in the machine which damages the machine itself and workers.
6. It eliminates the....
The Spec Of Shoes Making Machines : 1. Suitatbel for any kinds of materials, better for themoplastis materials.
2. Temperature of inner and outer moudls can be adjusted according to different materials.
3. Customer-made inner and outer moudls to obtain the most accurate effect.
4. After moulding, the counter, upper and lining will be adhered and flatt....
The Spec Of Shoes Making Machines : 1. The curve moulding of shoe upper and instep.
2. Suitable for the pre-moulding of shoe upper and instep for half boot and leather shoes.
3. Ensure no wrinkle & pleat in the lining after moulded.
4. Perfect shoe shape and productivity can be obtained.
5. The temperature of heat outer mould can be adjusted to get t....
The Spec Of Shoes Making Machines : 1. Stitch-down shoe backpart moulded.
2. General backpart moulded.
3. Suitable for all materials better for thermoplastic material.
4. The temperature of heat inner & outer mould can be setted separately ( according to different materials ).
5. The flanging wiper & positioning board device of cold mould help to get....
The Spec Of Shoes Making Machines : 1. Backpart and heel margin flanging moulding.
2. General backpart moulded.
3. Suitable for all materials better for thermoplastic material.
4. The temperature of both the inner and outer part of the mould can be adjusted freely by itself. ( depending on the material ).
5. High output, it can be operated in the sew....
The Spec Of Shoes Making Machines : 1. Backpart moulding machine by cold with heel margin flanging device.
2. General backpart moulded.
3. Suitatbel for thermoplastlc material.
4. Heating with hot Blower, needless hot mould.
5. The cooling element mould has build-in flanging wipers to flange the heel margln.
6. Leaning cold inner mould towards the o....
The Spec Of Shoes Making Machines : 1. Backpart moulding and re-shaping of backpart & top line.
2. High output & efficiency can be obtained from two cold & hot mould sets.
3. The temperature of both the inner and outer part of the hot mould can be adjusted individually to be suitable for upper of different kind material and the heating request of linin....
The Spec Of Shoes Making Machines : Two colour rotary type automatic soles jointing & ejecting machine
1. NSK-212(4stations or 6 stations) for single manual operation have high mobility and efficient suited for few order, sample, testing mould.
2. The unique design of separate produce have good cooling system to use materials of foaming and no foamin....
The Spec Of Shoes Making Machines : Three colour rotary type automatic soles jointing & ejecting machine
1. NSK-213(4stations or 6 stations) for single manual operation have high mobility and efficient suited for few order, sample, testing mould.
2. The unique design of separate produce have good cooling system to use materials of foaming and no foam....
The Spec Of Shoes Making Machines : 1. NSK-250A is accurately controlled and operated by computer: smooth to operate and easy to maintain.
2. Independent hydraulic system; precise pressure, efficient operation, high productivity & top quality.
3. A very capable clamping mould and high clamping mould pressure combine to produce a product without any b....
The Spec Of Shoes Making Machines : Rotary type plastic sole automatic injection moulding machine:
1. This machine is suitable for P.V.C.,T.P.R. foaming & unfoaming material, T.P.U. & T.P.E. to produce high-level shoe soles.
2. Feeding screw special design with high efficient hydraulic motor can feed material smoothly and quickly. This can produce sol....
The Spec Of Shoes Making Machines : Two color rotary type plastic sole automatic injection moulding machine:
1. NSK-286-2C is controlled by P.L.C. accurately; smoothly and easy maintenance.
2. Independent hydraulic system; precise pressure, & high production capacity & top quality products are available.
3. Unique design in clamping cylinder make st....
The Spec Of Shoes Making Machines : Feature:
1. It completes two-color choes making process directly which is instesd of the former complicated procedure of lasting ,gluing and sole attaching.
2. It is suitable for P.V.C. foaming, T.P.R. powder P.U. & N.B.R.
3. Photoelectric digit control system with 3 patents edvides quantity of materials into s....
The Spec Of Shoes Making Machines : Feature:
1. The NSK-375 is the first machine with the photo-cell digital system in Taiwan. It is easy to accurately adjust the ejection quantity.
2. The machine is specially designed for producing rain boots. It is automatic, economical, efficient, and easy to operate.
3. The machine is run by a hydraulic system.....
The Spec Of Shoes Making Machines : Two colour rotary type rain boots automatic injection moulding machine:
1. Fixed quantity by computer and auto ejection control assistant equipment make ejection quantity more precise and it is easier to operate.
2. Multiple security protection system ensures operators and moulds.
3. The whole machinery is workin....
