The Spec Of Testing Machines : There are three detectors to detect tire left side wall, right side wall and tread position. The detector is actuated by air cylinder to detect tire run-out condition while tire running. This detect singal will be input into computer to be analyzed by software and displayed on monitor in order to judge the tire wobbl....
The Spec Of Testing Machines : This type of bursting strength tester is suitable for test the bursting resistance strength of paper. This machine is adopted with signal output of pressure. While specimen is breaking, the maximum breaking value will be kept with the alarm buzzer alert light automatically.
The Spec Of Testing Machines : 1. Induct the current UV intensity in 3 seconds.
2. LCD display.
3. With 8 levels (1-8).
4. Display the current temperature( ℃/ ℉).
The Spec Of Testing Machines : 1. L1, L2, two step measurement.
2. Position presetting for L1, L2, insures fast operation.
3. Spring rate calculation.
4. Imperial or metric units switchable.
5. Length compensation built-in.
6. Printer included.
7. Load comparator available for tolerance check (optional).
The Spec Of Testing Machines : 1. Capacity: 100kg.
2. Testing stroke: 70mm.
3. Accuracy: 0.2% FS.
4. Measuring unit: KG. LB. N.
5. LxWxH: 57x25x50cm.
The Spec Of Testing Machines : 1. These parallel-jaw bar clamps are valued for quick, accurateclamping of panels, carcasses and frameworks.
2. The end stop on the steel bar helps stabilize the clamp during use and detaches to resverse the screw jaw for spreading purposes.
3. The comfortable screw handle is compound material.
The Spec Of Testing Machines : 1. Dial diameter: 2-1/2".
2. Pressure range: 0~300psi / 21kg / cm2.
3. Housing: black-painted steel.
4. Ring: chrome-painted steel.
5. Lens: acrylic.
6. Pointer: flat black-painted aluminum.
7. Rubber protector.
8. Stem with release valve and quick release chuck for attaching fittings.
The Spec Of Testing Machines : This tester is for testing discoloration level of textile or leather; the method is grip the specimen onto a rub-platen fixing device, and wrap a 5 cm ×5 cm white cotton cloth on the rub-hammer on above, the diameter of rub-hammer is 16 mm, central load is: 900g, abrasion distance is 10 cm, use abrasion speed at 1time....
The Spec Of Testing Machines : 1. Advanced servohydraulic technology: EKTRON servohydraulic test system meets the broadest range of dynamic material testing needs. This system offers better control and reliability at higher testing frequencies than electromechanical or pneumatic equipment.
2. High measuring precision: high performance hydraulic ac....
The Spec Of Testing Machines : SY-T105 Oil seal gyration durable life testing machine:
1. Application: suitable for various oil seals gyration durable life testing.
2. Features:
(1) Gyrate at high speed or low speed with multi-speed auto control.
(2) Test the gyration of speed, direction, temperature, time, and preset on proface scope. Test f....
The Spec Of Testing Machines : SC short flangeless adapters & attenuators simplex & duplex.
1. Features:
(1) Low insertion loss.
(2) Low back reflection loss.
(3) Easy to handle.
(4) Environmental stable.
2. Applications:
(1) Telecommunications.
(2) Local area network.
(3) Fiber to the home.
(4) Fiber optic sensors.
(5) Testing instrument....
The Spec Of Testing Machines : 1. Features:
(1) Based on OTDR technology.
(2) Designed to determine the fiber length or fault location.
(3) Palm-sized & portable.
(4) Easy to operate by only one touch.
(5) Measure for up to 30km with up to 5 fault events.
(6) Additional visible light (VFL) 650nm available to locate fiber distribution and test....
The Spec Of Testing Machines : 1. Product name: swaying test machine.
2. Swaying angle: max 150 (adjustable).
3. Swaying frequency:
(1)60Hz: 12 adjustable.
(2)50Hz: 10 adjustable.
The Spec Of Testing Machines : Available for temperature, humidity, pressure, flow, ampere, voltage indicator. Multi input: R, S, B, K, E, T, J, W, Pt100, Cu50 and linear, analogue 4-20mA, 0-5V, 0-20mV, 0-50mV, etc. Can be seleted by user. With maximum 4 alarms (optional function). 0.8" LED display makes clear reading. With 3 decimal for analog....
The Spec Of Testing Machines : Measure tolerance 0.01, 1~6 movable measure gauges can be synchronically installed for multiple points measuring.
The Spec Of Testing Machines : VC600 is a tester designed to test the clamping voltage of TVS device. Max peak power is 1500W. Test wave form is 10*1000uS pulse or square wave plus (1mS max).Both unipolar and bipolar TVS device can be tested.
The Spec Of Testing Machines : MFOC manufactures the SC, SC/APC, FC, FC/APC, ST, D4, DIN, LC and MU styles to meet your specific requirements.
The Spec Of Testing Machines : 1. The test roll can be used to test the following plastic materials
and their related agents:
(1) PVC( polyvinyl chloride ): rigid PVC, non-rigid PVC.
(2) PP( [olypropylene ).
(3) PS( [olystyrene ).
(4) ABS( aerylonitrile-butadiene-styrene copolymer ).
(5) EVA( ethylene-vinyl acetate copolymer ).
2. The stabil....
The Spec Of Testing Machines : 1. For testing the time to drill and form thread of the tapping screws, self-drilling tapping screws.
2. Electric drill made DEWALT/DW205-TW duty 1/2”Bsr drill.
3. LED shows the time to drill and form thread.
4. Available for 0.8~10.0mm max‧thickness test plate.
The Spec Of Testing Machines : Tough ABS body supported by aluminium frame with strong magnetic base and pocket clipper.
The Spec Of Testing Machines : 1. Video system: high resolution and high accuracy CCD.
2. Magnification: 0.7x-4.5x ( 17.5x-112.5x) zoom lens.
3. Illumination: adjustable surface and contour illumination.
4. Linear scale: 0.001mm on X, Y-axis.
5. Repeatability: 0.003mm on X, Y-axis.
6. Connection: USB output + metrology software.
7. Sighting de....
The Spec Of Testing Machines : 1. Notebook style, special backpack, lightweight and convient.
2. Intelligent ports, 5 available different probes.
3. Portable and trolley optional.
4. 7 segment intelligent STC adjustment, high resolution images.
5. Low radiative 15 inch TFT LCD display.
6. Great capacity of cineloop, high definition dynamic imag....
The Spec Of Testing Machines : 1. MIT type folding endurance tester.
2. This machine is to test the folding endurance of Metal foil, paper card board, will go through bending (or similar) motion, if material cannot pass through this bending test, will affect the quality of product.
The Spec Of Testing Machines : This is an objective method, with a database impact tester to impact specimen under a specified "potential energy", the lost energy by damage is the endurance strength of the specimen.
The Spec Of Testing Machines : 1. This tester is aim to test the adhesive contact strength of tape under static load.
2. Provide the information for tape adhesive contact pressure evaluation.
3. The constant pressure in oven is also available.
The Spec Of Testing Machines : This equipment can provide various light sources for color comparison for printing, coating, textiles, fluorescence and more.
The Spec Of Testing Machines : 1. This tester is mainly to test the abrasion-resistant and tearing-resistant of rubber (or other elastic material).
2. It is suitable for testing tire, conveyor belt, transmission belt, and shoe sole and more.
The Spec Of Testing Machines : 1. This tester uses motor to drive and twist, to test the "Twisted level" and "Twisted Shrinkage" of "Single Fiber" or "Twisted Fiber".
2. It is suit for both "Single and Dual Fiber", "Twisted Fiber".
The Spec Of Testing Machines : 1. B series is a best efficient and complete system. Except easy operating and display in B indicator, and also can connect to computer through RS232 with a full testing result and testing method set up.
2. Test for various material such as rubber, plastic, tape, textile, electrical product in tensile, compression, pe....
The Spec Of Testing Machines : 1. A1 series is a completely computer controlled material testing machine with AC server motor, ball screws and timing belt for a high precision testing result.
2. Test for various material such as rubber, plastic, tape, textile, electrical product in tensile, compression, peel, fatigue, bending test with different cl....
