Select
The Spec Of Tool Grinders : 1. Grinding capacity: 660 x 127 x 15.8 mm.
2. Grinding power: 2 hp.
3. Grinding wheel size: 150 x 100 x 25.4 mm. 1. Machine size: 1120 x 860 x 960 mm.
2. Machine weight: 280 kgs. ....
Select
The Spec Of Tool Grinders : 1. Max tool length: 200mm.
2. Max chuck dia: 32mm.
3. Max swing over table: 200mm.
4. Grinding spindle speed: 1000~6000rpm.
5. Main motor: 3Hp (2.25kw) / 5Hp (3.75kw).
6. X axis travel: 200mm. 1. Y axis travel: 110mm.
2. Z axis travel: 140mm.
3. C axis rotation: 360°.
4. A axis rotation: -10° ~ 180°.
....
Select
The Spec Of Tool Grinders : 1. Apply linear slide rails to the X-axis, Y-axis, Z-axis, in combination with servo motor drive, the accurate locating and the slow feeding grinding could be achieved.
2. Servo motor control, it could discretionary sets out the teeth number and the feeding load.
3. Single-mere program, a one-shot single-mere simul....
Select
The Spec Of Tool Grinders : 1. Longitudinal travel of table: 230mm.
2. Cross travel of saddle: 180mm.
3. Working table area: 620 x 190mm.
4. Tilting wheel head. It could be tilted easily and swiveled 360° on the horizontal plane. Both of these features make it easy to set the rake and relief angles and make for a wide angle or grinding.
Select
The Spec Of Tool Grinders : 1. PA-7680: 3" air wheel grinder, no gear.
2. PA-8430: 4-1/2" air angle grinder, 1.0HP. 1. PA-7680:
(1) Free speed: 16,000rpm.
(2) Disc size: 75mm.
(3) Air inlet: 1/4".
(4) Working pressure: 90psi.
(5) Length: 195mm.
(6) Weight: 1.3Kgs.
2. PA-8430:
(1) Free speed: 11,000rpm.
(2) Power: 1.....
Select
The Spec Of Tool Grinders : For grinding HSS and CARBIDE engraving cutter as well as single. lip or multiple-lip cutters of various shapes such as radiused cutters or negative taper angle of cutter. The universal index head is provide at 24 positions so that any particular angle or shape can be obtained, free 386oor 180o rotation is allowed. For ....
Select
The Spec Of Tool Grinders : 1. Distance table between: 150mm.
2. CenersMax. grinding diameter: 150mm .
3. Wheel diameter (Dia. x Width x Bore): 150 x 40 x 40mm (5.9 x 1.5 x 1.5).
4. Grinding spindle speed: 3000rpm (60Hz) 2850rpm (50Hz).
5. Main motor: 3Hp (2.25kw) / 5Hp (3.75kw).
6. X axis travel: 150mm.
7. Y axis travel: 50mm.
8. B a....
Select
The Spec Of Tool Grinders : 1. Distance table between: 150mm.
2. CenersMax. grinding diameter: 150mm.
3. Wheel diameter (Dia. x Width x Bore): 150 x 40 x 40mm (5.9 x 1.5 x 1.5).
4. Grinding spindle speed: 3000rpm (60Hz) 2850rpm (50Hz).
5. Main motor: 3Hp (2.25kw) / 5Hp (3.75kw).
6. X axis travel: 150mm.
7. Y axis travel: 50mm.
8. B ax....
Select
The Spec Of Tool Grinders : 1. Apply linear slide rails to the X-axis, Y-axis, Z-axis, in combination with servo motor drive, the accurate locating and the slow feeding grinding could be achieved.
2. Servo motor control, it could discretionary sets out the teeth number and the feeding load.
3. Single-mere program, a one-shot single-mere simul....
Select
The Spec Of Tool Grinders : 1. Apply linear slide rails to the X-axis, Y-axis, Z-axis, in combination with servo motor drive, the accurate locating and the slow feeding grinding could be achieved.
2. Servo motor control, it could discretionary sets out the teeth number and the feeding load.
3. Single-mere program, a one-shot single-mere simul....
Select
The Spec Of Tool Grinders : 1. CNC tool grinder.
2. High precision.
3. Efficiency. 1. Max tool length: 400 mm.
2. Max chuck dia.: 32 mm.
3. Max swing over table: 200 mm.
4. Grinding spindle speed: 60~6000 mm.
5. Main motor: 10 Hp ( 7.5 Kw ).
6. X axis travel: 400 mm.
7. Y axis travel: 230 mm.
8. Z axis travel: 250 mm.
9. C axis rota....
Select
The Spec Of Tool Grinders : The TG-5 is based on special design, consists of a firm machine bed, 5 CNC Axes which equipped with high rigid ball screws and linear guides, to make operate smoothly without vibration. The collet chuck is ranged from O3-32mm when grinding out of the solid with CBN or diamond wheels. It is very suitable for Lots sizes ....
Select
The Spec Of Tool Grinders : 1. End mill grinder - the end mill grinder is mainly applied to CNC lathe, CNC machining center, die making.
2. Break through Agaon in technology of drill sharpener quick and precise.
3. Cam device: this machine comes with four cams ranging from no.1 to no.4. simply change the cam when grinding to grind drill,end mil....
Select
The Spec Of Tool Grinders : 1. End mill grinder - the end mill grinder is mainly applied to CNC lathe, CNC machining center, die making.
2. Break through Agaon in technology of drill sharpener quick and precise.
3. Cam device: this machine comes with four cams ranging from no.1 to no.4. simply change the cam when grinding to grind drill,end mil....
Select
The Spec Of Tool Grinders : 1. This grinding machine features precision structural design and a range of useful functions with the added plus of easy operation.
2. All adjustments and blade replacements are carried out with the protective cover in place for the ultimate in safety and noise reduction.
3. This is a powerful yet operator- and envi....
Select
The Spec Of Tool Grinders : 1. Eyan Machine Tools Co., Ltd professional manufacturer of circular Knifes Grinder,knifes grinder, surface grinders.
2. A surface grinder is a machine tool used to provide precision ground surfaces, either to a critical size or for the surface finish.
3. Universal surface grinder with vertical spindle and rotating c....
Select
The Spec Of Tool Grinders : 1. Longitudinal travel of table: 185mm.
2. Cross travel of saddle: 120mm.
3. Working table area: 125 x 520mm
4. Motor could be rotated 360°, it could increase the grinding function and range of the machinery. 1. Vertical adjustment of wheel head: 140mm
2. Vertical tilting range of wheel head: 360°
3. Si....
Select
The Spec Of Tool Grinders : 1. Sharpen and recondition.
2. Parts with complex shape. 1. Workhead Swing over main slide, max. dia.: 304 mm.
2. Collet work dia. max.: 32 mm.
3. Collet work dia. min.: 3 mm.
4. Lead generated by spiral lead machanism, min.: 0°~45°.
5. Length between spindle nose and tail center, max.: 125 mm.
6. Wheelhead....
Select
The Spec Of Tool Grinders : The CM-A Series is equipped with a linear scale and digital readout systems on the X, Y and A axes. The High Precision Camera Device(C.C.D.)provides maximum operational convenience, accurate positioning,increased efficiency and allows for on-line quality control. The machine features many versatile functions. It is ide....
Select
The Spec Of Tool Grinders : 1. Versatility
2. Satisfy with your
3. Specific needs 1. Swing over table: 250 mm.
2. Distance between centers: 700 mm.
3. Distance between tailstock & workhead: 580 mm.
4. Taper hole in workhead spindle: MT#5 and ASA #50.
5. Working surface: 135 mm X 940 mm.
6. Longitudinal movement of table: 400 mm.
7. C....
Select
The Spec Of Tool Grinders : 1. Monaset cutters and tool grinders .
2. Sharpen, and reconditions, parts with complex shapes.
3. Wheelhead toothrest assembly with extension bar.
4. Grinding wheel guards with extension bar.
5. Front stock support.
6. Straight cylindrical collets (please select "A" or "B"):
(A) Metric siz....
Select
The Spec Of Tool Grinders : For grinding HSS and CARBIDE engraving cutter as well as single. lip or multiple-lip cutters of various shapes such as radiused cutters or negative taper angle of cutter. The universal index head is provide at 24 positions so that any particular angle or shape can be obtained, free 386oor 180o rotation is allowed. For ....
Select
The Spec Of Tool Grinders : 1. Monaset cutter grinders.
2. The CM-A Series is equipped with a linear scale and digital readout systems on the X, Y and A axes. The High Precision Camera Device (C.C.D.)provides maximum operational convenience, accurate positioning, increased efficiency and allows for on-line quality control. The machine features m....
Select
The Spec Of Tool Grinders : 1. Chip breaker slot grinding machine.
2. Automatic chip breaker grinder machine for HSS circular saw blades.
3. Designed for auto chip breaker slot grinding machine at a time.
4. Touch-sensing screen provides easy operation and adjustment and fast accomplishment.
5. Cross and vertical movement are operated by ai....
Select
The Spec Of Tool Grinders : 1. Grind wheel: for metal grinding, cutting and edging, knife grinding.
2. Polish wheel: for polishing, precision sleeking. 1. Power: 60W, 50/60Hz, 2850/3450RPM.
2. Grinding wheel: 75 x 20 x 8 mm.
3. Polishing wheel: 75 x 12 x 10 mm. ....
Select
The Spec Of Tool Grinders : 1. Both side with safety wheel guard made of steel plate.
2. Both side with adjustable tool rest and adjustable eye-shield.
3. One each of coarse and medium grinding wheel.
4. Housing & base are made of cast iron. 1. Power: 6A. 1/2HP.
2. Full load rpm: 3450 rpm.
3. Grinding wheel dimension: 203 x 16 x 19 (8 x ....
Select
The Spec Of Tool Grinders : 1. With safety throttle lever, built-in speed regulator.
2. Grinding wheel / cutting wheel size: 2 inch (not included). 1. Free speed: 19,000 rpm.
2. Spindle thread size: M6 x 1.0mm.
3. Grinding wheel / cutting wheel size: 2 inch (not included).
4. Air inlet: 1/4 inch.
5. With safety throttle lever, built-in s....
Select
The Spec Of Tool Grinders : With safety throttle lever, built-in speed regulator. 1. Free speed: 20,000rpm.
2. Collet: 6mm.
3. Air inlet: 1/4" -19ps.
4. Working pressure: 90psi.
5. Air consumption: 85L/Min.
6. Sound pressure level: 93dBA.
7. Sound power level: 104dBA.
8. Vibration: 2.5m/s2.
9. Length: 140mm.
10. Weight: 0.5Kgs....
Select
The Spec Of Tool Grinders : 1. PG-8042: 1/4" silent air die grinder.
2. PG-8092: 1/4" silent air die grinder, 25000rpm.
3. PG-8104: 1/4" silent air angle die grinder, 15000rpm. 1. PG-8042:
(1) Free speed: 22,000rpm.
(2) Collet: 6mm.
(3) Air inlet: 1/4".
(4) Working pressure: 90psi.
(5) Air consumption: 114L/Min.
(....
Select
The Spec Of Tool Grinders : 1. PG-8120: air pencil die grinder, 54000rpm.
2. PG-8145: 3mm air pencil die grinder -70000rpm.
(1) Small grinder normally equipped with a collet.
(2) For use with carbide burrs and mounted points.
(3) Penumatic industrial tools.
(4) Designed for high speed porting and finishing of small parts.
3. PG-8200: air p....