The Spec Of Industrial Chemicals : 1. Sulfamic acid can be applied to metal parts cleaning, getting away oxidized surface.
2. Slightly corrosive to metal, used to flush boiler.
3. Sterilize bacterium in water.
4. Blerch fibers, wood and paper.
5. Remove nitrire in tobacco.
6. Sulfamic acid can be used as fire resistance of cotton fiber.
7. Sulfami....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioning:
Generally, 6-48 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : Application:
Accelerator activator, pigment, and reinforcing agent in rubber; ointment; pigment and mold growth inhibitor in paints; ceramics; floor tile; glass; zinc salts (zinc stearate etc.) feed additive; semiconductor in electronic devices; electronic ceramics, raw material to produce zinc phosphate as steel coat....
The Spec Of Industrial Chemicals : Excellent gloss, good yellowing resistance and hardness after high temperature. 1. Solid content: 60%.
2. Solvent: PMA/XL.
3. Viscosity: U~Z.
4. Acid value: 5~10. ....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioning:
Generally, 6-48 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioning:
Generally, 6-48 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioning:
Generally, 6-48 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioning:
Generally, 6-24 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioning:
Generally, 6-24 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioning:
Generally, 6-24 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioning:
Generally, 6-24 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : Self-extinguishing (Flame-retardant) UL94:
1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioning:
Generally, 6-48 ho....
The Spec Of Industrial Chemicals : Self-extinguishing (Flame-retardant) UL94:
1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 12 kg/m³.
2. Conditioning:
Generally, 6-48 ho....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 20 kg/m³.
2. Conditioning:
Generally, 6-24 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 20 kg/m³.
2. Conditioning:
Generally, 6-24 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 20 kg/m³.
2. Conditioning:
Generally, 6-24 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : 1. Preforming:
The steam must be saturated at the temperature of 95°~105°C. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 20 kg/m³.
2. Conditioning:
Generally, 6-24 hours is recommended, depends on the density. ....
The Spec Of Industrial Chemicals : 1. Typical properties:
(1) Appearance: white powder
(2) Melting point: 103~105°c(decomp.)
(3) Solubility: insoluble in water, ethylene glycol, petroleum ether slightly soluble in alcohols, toluene, styrene & cyclohexane.
(4) Yery soluble in benzene, ketones & chloroform.
2. Application:
Dibenzoyl peroxid....
The Spec Of Industrial Chemicals : High gloss, high hardness, good adhesion, non-yellowing, chemical resistance, and good durability. 1. Molecular quantity: 450~2800 g/mol.
2. Functionality: 1~6.
3. Viscosity: 435~9850. ....
The Spec Of Industrial Chemicals : Fast drying, high gloss, and strong adhesion after adequate aging. 1. Solid content: 33~49.5%.
2. Partical size: 50~200 nm.
3. P.H.: 7~9.5.
4. Viscosity: 100~1000 cps. ....
The Spec Of Industrial Chemicals : High gloss, good processing properties, excellent yellowing resistance after baking, good sterilization, good adhesion on printing ink. 1. Solid content: 50~60%.
2. Solvent: S150.
3. Viscosity: Z2~Z5.
4. Acid value: 2~5. ....
The Spec Of Industrial Chemicals : Good hardness, fast drying, film build, high gloss and excellent yellowing resistance. 1. Solid content: 70~80%.
2. Viscosity: Y~Z5.
3. Acid value: 5~7.
4. Color: 1~5. ....
The Spec Of Industrial Chemicals : Good Hardness, adhesion and flexibility, excellent acid and alkali resistance. 1. Solid content: 60~70%.
2. Solvent: S150/XL.
3. Viscosity: V~Z4.
4. Acid value: 5~30. ....
The Spec Of Industrial Chemicals : Application:
Accelerator activator, pigment, and reinforcing agent in rubber; ointment; pigment and mold growth inhibitor in paints; ceramics; floor tile; glass; zinc salts (zinc stearate etc.) feed additive; semiconductor in electronic devices; electronic ceramics, raw material to produce zinc phosphate as steel coat....
The Spec Of Industrial Chemicals : Application:
Accelerator activator, pigment, and reinforcing agent in rubber; ointment; pigment and mold growth inhibitor in paints; ceramics; floor tile; glass; zinc salts (zinc stearate etc.) feed additive; semiconductor in electronic devices; electronic ceramics, raw material to produce zinc phosphate as steel coat....
The Spec Of Industrial Chemicals : Grades:
Wet process active grade; surface area can control as your requirement.
Use:
Accelerator activator, pigment, and reinforcing agent in rubber; ointment; pigment and mold growth inhibitor in paints; ceramics; floor tile; glass; zinc salts (zinc stearate etc.) feed additive; semiconductor in electronic devices....
