Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : 1. Corrosion resistance.
2. Waterproof (optional).
3. Long life. In accordance with customers' specification requirements. ....
Select
The Spec Of Keypad Manufacturers : A membrane switch consists of two polyester films screen printed with conductive ink to complete the circuit. A spacer in between two circuits, which is, die cut at contact points. The die-cut holes allow the touch of a finger to close the contact, completing the circuit. The circuit is broken when released. The panel ....
Select
The Spec Of Keypad Manufacturers : Special treatment on key surface for abrasion resistance,
illuminated key-cap on key tops are available with backlighting by laser etching process. This technology is commonly used in remote controls, mobile phones. Silicon rubber standerd operation characteristic:
1. Actuation force range: up to 450g.
2. Cont....
Select
The Spec Of Keypad Manufacturers : Epoxy-coated silicone rubbers with 13Kgf/cm tear strength:
1. Temperature for us: -55 to +250 degrees Celsius.
2. Specific gravity: 1.15.
3. Tensile strength: 90 Kg/cm2.
4. Tear strength: 13Kgf/cm. 5. Compression set: 10%(180 degrees Celsius X 22hrs).
6. Insulation breakdown: 24Kv/mm.
7. Colour: colour....
Select
The Spec Of Keypad Manufacturers : Epoxy-coated silicone rubbers with 13Kgf/cm tear strength:
1. Temperature for us: -55 to +250 degrees Celsius.
2. Specific gravity: 1.15.
3. Tensile strength: 90 Kg/cm2.
4. Tear strength: 13Kgf/cm. 1. Compression set: 10%(180 degrees Celsius X 22hrs).
2. Insulation breakdown: 24Kv/mm.
3. Colour: colour....
Select
The Spec Of Keypad Manufacturers : Epoxy-coated silicone rubbers with 13Kgf/cm tear strength:
1. Temperature for us: -55 to +250 degrees Celsius.
2. Specific gravity: 1.15.
3. Tensile strength: 90 Kg/cm2.
4. Tear strength: 13Kgf/cm. 1. Compression set: 10%(180 degrees Celsius X 22hrs).
2. Insulation breakdown: 24Kv/mm.
3. Colour: colour....
Select
The Spec Of Keypad Manufacturers : Epoxy-coated silicone rubbers with 13Kgf/cm tear strength;
1. Temperature for us: -55 to +250 degrees Celsius.
2. Specific gravity: 1.15.
3. Tensile strength: 90 Kg/cm2.
4. Tear strength: 13Kgf/cm. 1. Compression set: 10%(180 degrees Celsius X 22hrs.).
2. Insulation breakdown: 24Kv/mm.
3. Colour: colou....
Select
The Spec Of Keypad Manufacturers : Epoxy-coated silicone rubbers with 13Kgf/cm tear strength:
1. Temperature for us: -55 to +250 degrees Celsius.
2. Specific gravity: 1.15.
3. Tensile strength: 90 Kg/cm2.
4. Tear strength: 13Kgf/cm. 1. Compression set: 10%(180 degrees Celsius X 22hrs).
2. Insulation breakdown: 24Kv/mm.
3. Colour: colourin....
Select
The Spec Of Keypad Manufacturers : Epoxy-coated silicone rubbers with 13Kgf/cm tear strength:
1. Temperature for us: -55 to +250 degrees Celsius.
2. Specific gravity: 1.15.
3. Tensile strength: 90 Kg/cm2.
4. Tear strength: 13Kgf/cm. 1. Compression set: 10%(180 degrees Celsius X 22hrs.)
2. Insulation breakdown: 24Kv/mm.
3. Colour: colour....
Select
The Spec Of Keypad Manufacturers : Epoxy-coated silicone rubbers with 13Kgf/cm tear strength:
1. Temperature for us: -55 to +250 degrees Celsius.
2. Specific gravity: 1.15.
3. Tensile strength: 90 Kg/cm2.
4. Tear strength: 13Kgf/cm. 1. Compression set: 10%(180 degrees Celsius X 22hrs.).
2. Insulation breakdown: 24Kv/mm.
3. Colour: colou....
Select
The Spec Of Keypad Manufacturers : Epoxy-coated silicone rubbers with 13Kgf/cm tear strength;
1. Temperature for us: -55 to +250 degrees Celsius.
2. Specific gravity: 1.15.
3. Tensile strength: 90 Kg/cm2.
4. Tear Strength: 13Kgf/cm. 1. Compression set: 10%(180 degrees Celsius X 22hrs).
2. Insulation breakdown: 24Kv/mm.
3. Colour: colour....
Select
The Spec Of Keypad Manufacturers : Epoxy-coated silicone rubbers with 13Kgf/cm tear strength:
1. Temperature for us: -55 to +250 degrees Celsius.
2. Specific gravity: 1.15.
3. Tensile strength: 90 Kg/cm2.
4. Tear strength: 13Kgf/cm. 1. Compression set: 10%(180 degrees Celsius X 22hrs).
2. Insulation breakdown: 24Kv/mm.
3. Colour: colour....
Select
The Spec Of Keypad Manufacturers : Epoxy-coated silicone rubbers with 13Kgf/cm tear strength:
1. Temperature for us: -55 to +250 degrees Celsius.
2. Specific gravity: 1.15.
3. Tensile strength: 90 Kg/cm2.
4. Tear strength: 13Kgf/cm. 1. Compression set: 10%(180 degrees Celsius X 22hrs).
2. Insulation breakdown: 24Kv/mm.
3. Colour: colour....
Select
The Spec Of Keypad Manufacturers : Thermoplastic Polyurethane (TPU) refers to general PU elastic material. This material does not cause any damage to human body or the environment. It is the most popular and optimal environment material to replace traditional procedure of membrane switch for now. Membrane switch standard operation characteristic:
1....
Select
The Spec Of Keypad Manufacturers : Thermoplastic Polyurethane (TPU) refers to general PU elastic material. This material does not cause any damage to human body or the environment. It is the most popular and optimal environment material to replace traditional procedure of membrane switch for now. Membrane switch standard operation characteristic:
1....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1.Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....
Select
The Spec Of Keypad Manufacturers : The core material of the mould is 718H or S136H. The base material of the mould is LKM. We can make all kinds of plastic injection mould toolings according to our customer's requirement, also we can design and manufacture the mould for our customers besides the toolings. We produce the plastic parts or castings for our....
Select
The Spec Of Keypad Manufacturers : The core material of the mould is 718H or S136H. The base material of the mould is LKM. We can make all kinds of plastic injection mould toolings according to our customer's requirement, also we can design and manufacture the mould for our customers besides the toolings. We produce the plastic parts or castings for our....
Select
The Spec Of Keypad Manufacturers : The core material of the mould is 718H or S136H. The base material of the mould is LKM. We can make all kinds of plastic injection mould toolings according to our customer's requirement, also we can design and manufacture the mould for our customers besides the toolings. We produce the plastic parts or castings for our....
Select
The Spec Of Keypad Manufacturers : The material is silicone rubber. Silicone rubber keypads can be coated with a layerof epoxy resin to form a hard top and feeling like plastic apprearance and providesscreen text protection. 1. Inner packing: plastic bags.
2. Outer packing: cartons. ....