Select
The Spec Of Fiber Optic Components : Short for Dense Wavelength Division Multiplexing, an optical technology used to increase bandwidth over existing fiber optic backbones. DWDM has been very successful in the backbone. DWDM works by combining and transmitting multiple signals simultaneously at different wavelengths on the same fiber. In effect, one fiber....
Select
The Spec Of Fiber Optic Components : 1. CAT.5e/CAT.6 patch panel.
2. Terminal Block: White coor, New Version 110D Connector (Both for Krone & 110D impact tool).
3. Wiring: T568A & T568B combination.
4. Panel: Black colored 1.6mm thickness PCB metal; six ports per module.
5. Jack: RJ45(8P8C) jack of 90°angle, UL94V-0 PBT, 50u' gold with nickel-plated ....
Select
The Spec Of Fiber Optic Components : 1. Simplex or duplex available.
2. In compliance with bellcore 326 and TIA/EIA 604 standard.
3. Easy installation.
4. High precision.
5. Low insertion loss. Application:
1. CATV system.
2. Telecommunications.
3. Optical networks.
4. Testing / measurement instruments.
5. Fiber to the home. ....
Select
The Spec Of Fiber Optic Components : Description:
Wide range of precise plastic molds (moulds) applied for automobile, motorcycles, electronics, computerand components. also specialize in mold design and molding process. Specification:
1. All kinds of injection molds (moulds) design and manufacture of moulds, injected plastic moulds and mould produ....
Select
The Spec Of Fiber Optic Components : XENPAK offer a convenient and cost effective solution for the adoption of 10 Gigabit Ethernet in data center, campus, metropolitan area access and ring networks. 1. XENPAK-10GB-SR: 10GBASE-SR module supports a link length of 26 meters on standard FDDI grade MMF. Up to 300-meter link lengths are possible when using ....
Select
The Spec Of Fiber Optic Components : Description:
Wide range of precise plastic molds (moulds) applied for automobile, motorcycles, electronics, computerand components. also specialize in mold design and molding process. Specification:
1. All kinds of injection molds (moulds) design and manufacture of moulds, injected plastic moulds and mould produ....
Select
The Spec Of Fiber Optic Components : Bi-Directional Wavelength Division Multiplexer (BIDI-WDM) solution:
BIDI-WDM, single fiber transceivers offer network designers the ability to double network capacity without running new fiber. No software upgraded is required. Single fiber transceivers look like the typical transceivers but have only one connector. I....
Select
The Spec Of Fiber Optic Components : Course Wave Division Multiplexing (CWDM) solution allows scalable and easy-to-deploy Gigabit Ethernet (GbE) and fibre channel services. The combination of CWDM GBICs and CWDM SFPs and CWDM optical Add-Drop Modules (OADMs) and multiplexers enables the design of a flexible and highly available multi-service network. The ....
Select
The Spec Of Fiber Optic Components : SFP /GBIC transceivers are available with a variety of different transmitter and receiver types, allowing users to select the appropriate transceiver for each link to provide the required optical reach over the available optical fiber type (e.g. multi-mode fiber or single-mode fiber). Our optical transceiver cross ....
Select
The Spec Of Fiber Optic Components : XFP transceivers solution:
The 10 Gbps 1310 nm and 1550 nm XFP transceivers are integrated fiber optic transceivers that provide high-speed serial links at the following signaling rates: 9.95 Gbps, 10.31 Gbps, and 10.51 Gbps. The XFP integrates the receiver and transmit path. The transmit side recovers and retimes th....
Select
The Spec Of Fiber Optic Components : 1. Clear quartz rod or ceramic rod.
2. One ceramic pin or two ceramic pins available. 1. Length: 40mm.
2. In Compliance with Bellcore 326 and TIA/EIA 604 Standard.
3. Easy Installation.
4. High Precision.
5. Low insertion Loss. ....
Select
The Spec Of Fiber Optic Components : Lengths: 40 and 60mm (others: 25mm to order). 100pcs a package or 24pcs a package. ....
Select
The Spec Of Fiber Optic Components : 1. Beige(MM) or blue(SM) color available.
2. CATV System.
3. Telecommunications.
4. Optical Networks.
5. Testing / Measurement Instruments.
6. Fiber To the Home. 1. For SC connector duplex.
2. In Compliance with Bellcore 326 and TIA/EIA 604 Standard.
3. Easy Installation.
4. High Precision.
5. Low i....
Select
The Spec Of Fiber Optic Components : For FC D-type metal adapter. Can be with chain or without chain. ....
Select
The Spec Of Fiber Optic Components : Mode type: single-mode (PC or APC), mlti-mode. 1. Insertion: ≦ 0.2 dB (Zr. ceramic).
2. Repeat ability: ≦ 0.3 dB (p-bronze).
3. Operating temp range: 0.2 dB (500 cycle passed).
4. Storage temp range: - 40°C to +85°C.
5. Humidity: 95%RH (non-packaging). ....
Select
The Spec Of Fiber Optic Components : Mode type: single-mode (PC or APC), mlti-mode. 1. Insertion: ≦ 0.5 dB (Zr. ceramic).
2. Operating temp range: 0.2 dB (500 cycle passed).
3. Storage temp range: - 40°C to +85°C.
4. Humidity: 95%RH (non-packaging). ....
Select
The Spec Of Fiber Optic Components : Mode type: single-mode (PC or APC), mlti-mode. 1. Insertion: ≦ 0.5dB (Zr. ceramic).
2. Operating temp range: 0.2dB (500 cycle passed).
3. Storage temp range: -40°C to +85°C.
4. Humidity: 95%RH (non-packaging). ....
Select
The Spec Of Fiber Optic Components : 1. SM 1 x 3 and 3 x 3 SW coupler.
2. SM 1 x 3 DW coupler.
3. SM 1 x 4 SW and DW coupler. 1. Low insertion loss.
2. Comply with RoHS.
3. Comply with Telcordia GR-1209, GR-1221. ....
Select
The Spec Of Fiber Optic Components : Single mode 980nm and 1064nm coupler. 1. Low insertion loss.
2. Comply with RoHS.
3. Comply with Telcordia GR-1209, GR-1221. ....