Select
The Spec Of Push Switches : 1. A push switch (8.0 x 8.0 x 13.5mm).
2. The double sliding contact structures high reliability. 1. Materials:
(1) Case: POM.
(2) Base: PBT (UL94 V-0).
(3) Stem: POM.
(4) Terminals: brass (plating silver).
(5) Spring plate: copper beryllium.
(6) Spring: stainless steel.
(7) Fixed rod: stainless steel.
2. ....
Select
The Spec Of Push Switches : Hoisting equipment accessories. For GG/GL/CL winches 25A. ....
Select
The Spec Of Push Switches : 1. Material: ABS.
2. Blue LED lighted sensor area for easy identification. 1. Size: 6mm x 42mm x 115mm. 2. Hole distance: 83mm. We reserve the right to change the specification without notice or obligation! ....
Select
The Spec Of Push Switches : 1. Push button.
2. Selector switches.
3. Pilot lamp. Push button: flush head, elevation head, elevation head (rubber cap). ....
Select
The Spec Of Push Switches : 1. Case: Diallyl phthalate (DAP).
2. Plunger: Glass filled nylon or glass filled polyester (UL94V-0).
3. Bushing: Brass, nickel-plated.
4. Housing: Stainless steel.
5. Contact and terminal: Brass, silver-plated. 1. Contact rating: 1A@120VAC or 28 VDC; 0.4VA max@ 20VAC OR DC max.
2. Electrical life: 50,000 cycl....
Select
The Spec Of Push Switches : 1. Suitable for variety of dimensions.
2. Offering overload protection for all kinds of electronic roducts.
3. According to clients’ requests.
4. Products have been approved by UL & CAS. 1. Contact resistance: 20MΩ(max.).
2. Insulation resistance: DC 500V 100MΩ(min.).
3. Dielectric strength: 1500 VAC/1 M....
Select
The Spec Of Push Switches : Specification:
1. Circuit: On-off(1P2T).
2. Rating:
(1) 5A/80A250V~μ T85(VDE,D,S,N,FI).
(2) TV-5(UL,CSA), 10A250VAC(UL).
3. Contact R.(max): D.C.5V 1A 50m ohm.
4. Insulation R.(min): D.C.500V 500M ohm.
5. Withstand VOL.: A.C.2000V 1minute.
6. Operating force: 500 ± 200gf.
7. Life cycle(max): 10,000 cycles. ....
Select
The Spec Of Push Switches : 1. ABK-800A narrow/wide push button.
2. ABK-800A recommend type: hollow type door frame.
3. ABK-800B recommend type: hollow type doorframe and embedded type electronic wiring box. 1. Material: aluminum-made metal button.
2. Surface Treatment: aluminum alloy with sand-blasting.
3. Power required: 3A@36VDC.
4....
Select
The Spec Of Push Switches : 1. Built-in micro controller with power on self testing function (green light on for one second and no action from relay red light on to complete power on self testing).
2. Use of special infrared encoder design in order to avoid distraction of other infrared.
3. Double colors status light (standby: red, proximity: ....
Select
The Spec Of Push Switches : 1. Size: 5mm(H) x 75mm(W) x 120mm(L).
2. Hole distance: 84mm.
3. Net weight: 56g±5%, gross weight: 85g±5%.
4. Material: stainless steel.
5. Switch sealed to IP67.
6. LED colors: red, blue, green, amber. 1. Mechanical / Electrical characteristics. 2. Circuit: SPST-N0-DB. 3. Button travel (nominal): 0.09"....
Select
The Spec Of Push Switches : 1. Size: 5mm(H) x 75mm(W) x 120mm(L).
2. Hole distance: 84mm.
3. Net weight: 56g±5%, gross weight: 85g±5%.
4. Material: stainless steel.
5. Switch sealed to IP67. 1. Mechanical / Electrical characteristics. 2. Circuit: SPST-N0-DB. 3. Button travel (nominal): 0.09"/2.3mm. 4. Life (mechanical)(nominal): 5....
Select
The Spec Of Push Switches : 1. Zinc alloy sturdy body.
2. Size: 5mm (H) x 70mm (W) x 115mm (L).
3. Hole distance: 83mm. 1. Size: 5mm (H) x 70mm (W) x 115mm(L). 2. Hole distance: 83mm. 3. Material: zinc alloy. 4. Power: DC 12V 1A. 5. LED: DC 12V 15mA. 6. Life: 3,000,000 cycles (mechanical)/ 200,000 cycles (electrical). 7. Key stroke: 1.0mm. ....
Select
The Spec Of Push Switches : 1. Zinc alloy sturdy body.
2. Size: 5mm (H) x 42mm (W) x 115mm (L).
3. Hole distance: 83mm. 1. Material: zinc alloy. 2. Power: DC 12V 1A. 3. LED: DC12V 15mA. 4. Life: 3,000,000 cycles (mechanical), 200,000 cycles (electrical). 5. Key stroke: 1.0mm. 6. Double pole: N.O / N.C. 7. Color:PG-BUTTON-07(Silver) PG-BUT....
Select
The Spec Of Push Switches : 1. Case: high temperature NYLONG (UL94 V-0).
2. Base: high temperature NYLONG (UL94 V-0).
3. Stem: high temperature NYLONG (UL94 V-0).
4. Terminals: brass (plating silver or plating gold).
5. Spring plate: phosphor bronze.
6. Spring: SWP.
7. Fixed rod: stainless steel. 1. Mechanical life: 10,000 cycles min.
....
Select
The Spec Of Push Switches : 1. Small dimensions.
2. Good feeling. 1. Rating: DC 30V 2A/1A/0.3A.
2. Mechanical life: 10,000 cycles min.
3. Electrical life: 10,000 cycles min.
4. Operating temper.: -25℃ to 65℃. ....
Select
The Spec Of Push Switches : 5-Direction operating. 1. Rating: 50mA/DC 12V.
2. Mechanical life: 100,000 cycles min.
3. Electrical life: 100,000 cycles min.
4. Operating force: 300 ± 50gf. ....
Select
The Spec Of Push Switches : 1. Small dimensions.
2. Good feeling. 1. Rating: 10mA/DC 5V.
2. Electrical life: 100,000 cycles.
3. Mechanical life: 100,000 cycles min. ....
Select
The Spec Of Push Switches : Sealed snap-acting momentary type. Sealed against solder and cleaning process contaminants. Long life contact design. 1. Configuration: SPDT, DPDT.
2. Contact Rating: 1A@120VAC OR 28VDC (for silver plated).
3. Insulation resistance: 1,000 MΩ min.
4. Contact resistance: 20 mΩ max initial @2-4 VDC, 100mA.
5. El....
Select
The Spec Of Push Switches : 1. Specializing in producing toggle switches, rocker switches, slide switches, pushbutton switches, dip switches and tact switches.
2. The typical applications of products are to telecommunications, instrumentation, medical equipment, telephone & cable modems, computer peripherals & network products, etc.
3. All OEM....
Select
The Spec Of Push Switches : 1. Specializing in producing toggle switches, rocker switches, slide switches, pushbutton switches, dip switches and tact switches.
2. The typical applications of products are to telecommunications, instrumentation, medical equipment, telephone & cable modems, computer peripherals & network products, etc.
3. All OEM....
Select
The Spec Of Push Switches : 1. Specializing in producing toggle switches, rocker switches, slide switches, pushbutton switches, dip switches and tact switches.
2. The typical applications of products are to telecommunications, instrumentation, medical equipment, telephone & cable modems, computer peripherals & network products, etc.
3. All OEM....
Select
The Spec Of Push Switches : PC, vertical and right angle terminations. Snap-in front panel mounting available. 1. Contact rating: 1A@120 VAC or 28 VDC; 0.4VA max@20 VAC or DC max.
2. Electrical life: 30,000 make-and-break cycles at full load.
3. Contact resistance: 20 mΩ max. initial @2-4 VDC,100 mA.
4. Insulation resistance: 1,000 MΩ ....
Select
The Spec Of Push Switches : LED illumination and non-illumination.
Size: 15 x 15mm,19 x 19mm.
Various colors of panel for choice.
High temperature materials (UL94V-0). 1. Contact rating: 100mA max. 42 VAC/DC.
2. Mechanical life: 1,000,000 cycles.
3. Contact resistance: 100 mΩ max (initial).
4. Insulation resistance: 1,000MΩ min.
....
Select
The Spec Of Push Switches : 1. Switch function: 2P2T ON-ON.
2. Rating: D.C. 50V 0.3A.
3. Contact resistance: D.C. 5V 0.1A 50MΩ MAX. 1. Insulation resistance: D.C. 250V 100MΩ Min.
2. Withstand voltage: A.C. 250V; 1minute. ....
Select
The Spec Of Push Switches : Illuminated push button mushroon head. 1. Illuminated push button mushroon head: yellow.
2. Illuminated push button mushroon head: red.
3. Illuminated push button mushroon head: green. ....
Select
The Spec Of Push Switches : 1. A miniaturized push button switch(8.5x8.5x14; 8.5x8.5x22.5; or 8.45x8.45x14; 8.45x8.45x22.5).
2. The double sliding contact structures high reliability. 1. Mechanical life: 100,000 cycles min.
2. Electrical life: 10,000 cycles min.
3. Contact rating: 0.3Amps/0.5 Amps @30 VDC/16 VDC.
4. Insulation resistance:....
Select
The Spec Of Push Switches : 1. Stem: high temperature NYLONG (UL94 V-0) or POM.
2. Case: high temperature NYLONG (UL94 V-0) or POM.
3. Base: high temperature PBT or NYLONG (UL94 V-0).
4. Insert plate: high temperature PBT or NYLONG (UL94 V-0).
5. Terminals: brass (plating silver).
6. Clip: phosphor bronze.
7. Spring: SWP or stainless steer....
Select
The Spec Of Push Switches : 1. Case: POM.
2. Base: NILONG (UL94 V-0).
3. Stem: POM.
4. Terminals: brass (Plating silver).
5. Spring plate: C5210.
6. Spring: SUS304.
7. Fixed rod: SUS304. 1. Mechaanical life: 100,000 cycles min.
2. Electrical life: 10,000 cycles min.
3. Contact rating: 0.1Amps @30 VDC. ....
Select
The Spec Of Push Switches : 1. Case: high temperature NYLONG (UL94 V-0) or POM.
2. Base: high temperature PBT or NYLONG (UL94 V-0).
3. Stem: high temperature NYLONG (UL94 V-0) or POM.
4. Terminals: brass (plating silver).
5. Clip: phosphor bronze.
6. Spring: stainless steel.
7. Fixed rod: stainless steel. 1. Mechaanical life: 100,000 cy....
Select
The Spec Of Push Switches : 1. A miniaturized push button switch.
2. The double sliding contact structures high reliability.
3. Circuit: 2P2T. 1. Rating: 0.3A, 30VDC.
2. Mechanical life: 30,000 cycles min.
3. Electrical life: 10,000 cycles min.
4. Operating force: 2 Pole:230±50gf; 4 Pole:280±50gf; 6 Pole:380±50gf. ....