The Spec Of Relay Manufacturers : 3φ motor rating:
1. V220, V380, V440.
2. A12, A9, A9.
3. KW2.2, KW4, KW4.
The Spec Of Relay Manufacturers : 1. Shining SSR-SXXAA-(H) series AC to AC single phase solid state relays.
2. Maximum load current: 10A, 25A, 40A.
The Spec Of Relay Manufacturers : 1. Combined with BF-660C /BF-880/NBDE series reader to control single door.
2. Split system, more security for door access control.
3. Compact size and easy to make installation.
4. One relay output and two inputs for door sensor and exit button.
5. RS-485 communication.
6. Watch dog inside.
7. Power: DC-9 ....
The Spec Of Relay Manufacturers : Thermal overload relay:
"TH"-series 0.64A to 160A.
The Spec Of Relay Manufacturers : TSR series- three phase solid state relay:
1. High reliability by S.M.T. & TQC.
2. High isolation over than 50MΩ/500VDC.
3. High dielectric over than 2.5KV.
4. Low enable current less than 7.5mA / 12VDC.
5. C MOS IC OR TTL compatible.
6. Low EMI / EFI & surge by zero cross trigger method.
7. High surge current ....
The Spec Of Relay Manufacturers : Electronic relay.
The Spec Of Relay Manufacturers : 1. Relay modules can be mounted on DIN 15,DIN 32 and DIN 35 rails.
2. Supply two kinds of connectors to choose on relay modules series.
3. Use screwless clamping spring terminal blocks for 1 SPDT ( 1 form C) of relay modules.
4. There are a connector and terminal blocks on input terminal at same time to choose....
The Spec Of Relay Manufacturers : 1. 552 flasher relay.
2. 2P 6V 32CP MAX.(2-6).
3. 2P 12V 32CP MAX.(2-6).
4. 2P 24V 32CP MAX.(2-6).
The Spec Of Relay Manufacturers : Electronic relay.
The Spec Of Relay Manufacturers : Electronic relay.
The Spec Of Relay Manufacturers : Electronic relay.
The Spec Of Relay Manufacturers : Electronic relay.
The Spec Of Relay Manufacturers : 1. Thermal overload relays: 0.35A to 44A.
2. Heater elements, phase failure protect.
3. Instantaneous auxiliary contact: 1a 1b.
4. Approval: UL, CE, CCC.
The Spec Of Relay Manufacturers : 1. Shining SSR-SXXAA-(H) series AC to AC single phase solid state relays.
2. SSR-S10AA, SSR-S25AA, SSR-S40AA, SSR-S10AA-H, SSR-S25AA-H, SSR-S40AA-H.
The Spec Of Relay Manufacturers : 1. High quality and high technical productions with no electrical interference.
2. Two years product guarantee in factory used.
3. All specifications contained in this data sheet is subject to changes without notice.
The Spec Of Relay Manufacturers : 1. High quality and high technical productions with no electrical interference.
2. Two years product guarantee in factory used.
3. All specifications contained in this data sheet is subject to changes without notice.
The Spec Of Relay Manufacturers : 1. High reliability by S.M.T. & TQC. (surface mounting technology).
2. High lsolation over than 50M / 500VDC.
3. High dielectric over than 2.5KV.
4. Low enable current less than 7.5mA / 12VDC C MOSIC or TTL Compatible.
5. Low EMI / EFI & surge by zero cross trigger method.
6. High surge current duration over ....
The Spec Of Relay Manufacturers : 1. High reliability by S.M.T. & TQC. (surface mounting technology).
2. High lsolation over than 50M / 500VDC.
3. High dielectric over than 2.5KV.
4. Low enable current less than 7.5mA / 12VDC C MOSIC or TTL Compatible.
5. Low EMI / EFI & surge by zero cross trigger method.
6. High surge current duration over ....
The Spec Of Relay Manufacturers : 1. High reliability by S.M.T. & TQC. (surface mounting technology).
2. High lsolation over than 50M / 500VDC.
3. High dielectric over than 2.5KV.
4. Low enable current less than 7.5mA / 12VDC C MOSIC or TTL Compatible.
5. Low EMI / EFI & surge by zero cross trigger method.
6. High surge current duration over ....
The Spec Of Relay Manufacturers : 1. The VP-002 is a range of phase failure/ phase sequence/ under voltage/ overvoltage protection relays to continuously monitor AC power supplies both single phase, and three phase.
2. Output relay will operate to ON (pin 1& pin 3 close) when power is applied to the unit normally, and simultaneously detect if supplied....
The Spec Of Relay Manufacturers : 1. Only operational with correct power source voltage and phase sequence.
2. Suitable for main power source and motor starter circuit to prevent damage from insufficient phase or phase reversal.
3. Out-of-phase detection while the motor operating.
The Spec Of Relay Manufacturers : 1. Customized CMOS IC for low power consumption, high operation stability and time accuracy.
2. Wide adjustable current range (2A~7A).
3. LED status indicator for easy over current monitoring.
4. Surface mount and flush mount possible.
The Spec Of Relay Manufacturers : 1. Also called "miniture relay".
2. Models: Mk 2P-1, MK 3P-1. There are also MY series and LY series.
3. For futher information, please inquire Camsco Electric or visit www.camsco.com.tw.
