The Spec Of Terminal Block Manufacturers : Every wire harness is produced by Gamma 333PC fully automatic crimping machine according to IPC-A-620 workmanship standard and assembled together according to customers' specifications. 100% electrical test is provided on function, short and open circuit, hi-pot and insulation resistance.
The Spec Of Terminal Block Manufacturers : 1. Voltage rating: 125VAC RMS.
2. Current rating: 1.5AMP.
3. Contact resistance: 100 milliohms max.
4. Insulation resistance: 1000 megohms min @ 500VDC.
5. Dielectric strength: 750VAC RMS 60HZ, 1 min.
The Spec Of Terminal Block Manufacturers : Special high impedance cable crimped with pin terminal and terminal block assembly used for industrial electronics with top quality assurance.
The Spec Of Terminal Block Manufacturers : 1. Models: ATB-4, ATB-6, ATB-10, ATB-16, TB-35.
2. For further information, please inquire Camsco Electric or visit www.camsco.com.tw.
The Spec Of Terminal Block Manufacturers : 1. Shining TA series DIN rail assembly terminal blocks include TA-010~TA-400.
2. Rated voltage/current: 600V/10A~400A.
3. DIN rail: 35mm. assembly for any poles.
4. Item No.: TA-010, TA-020, TA-030, TA-040, TA-060, TA-100, TA-150, TA-200, TA-300, TA-400. N: The number of Poles (positions, ways).
The Spec Of Terminal Block Manufacturers : 1. User-friendly design. Fixed directional function for entrance control.
2. Able to collect the wires of various optional devices
(eg. supply DC24V for the sensor ;DC13V for the electric lock).
The Spec Of Terminal Block Manufacturers : 1. Since 1995, NHD has progressively developed Europe terminal block.
So far, rail mount terminal block has developed four different types of terminal Block including double deck terminal block.
2. Feed through terminals (rail mount on TS32/TS35 or direct mounting).
3. Earth through terminals (rail mount on TS35).
....
The Spec Of Terminal Block Manufacturers : Terminal blocks.
The Spec Of Terminal Block Manufacturers : 1. Since 1995, NHD has progressively developed Europe terminal block.
So far, rail mount terminal block has developed four different types of terminal Block including double deck terminal block.
2. Feed through terminals (rail mount on TS32/TS35 or direct mounting).
3. Earth through terminals (rail mount on TS35).
....
The Spec Of Terminal Block Manufacturers : 1. Shining TE series DIN rail assembly terminal blocks include TE-010~TE-400.
2. Rated voltage/current: 600V/10A~400A.
3. DIN Rail: 35mm. Assembly for any poles.
4. Item No.: TE-010, TE-020, TE-030, TE-040, TE-060, TE-080, TE-100, TE-125, TE-150, TE-200, TE-300, TE-400.
5. N: the number of Poles (positions, wa....
The Spec Of Terminal Block Manufacturers : Shining E&E TB-1503 fixed barrier terminal blocks
1. Specification
(1) Total length ( L ): 45.5 mm.
(2) Ref. length ( L1): 36.5 mm.
(3) Gap (A): 7 mm.
(4) Pitch ( B ): 9 mm.
(5) Screws ( C ): M3.
(6) Width ( W ): 22 mm.
(7) Height ( H ): 17.5 mm.
2. Materials
(1) Barrier materials: PC.
(2) Color: black.
(3....
The Spec Of Terminal Block Manufacturers : Shining E&E TD-015 double layers terminal blocks.
1. Specification
(1) Total length ( L ): 8.5 x P + 32 mm.
(2) Ref. length ( L1): 8.5 x P + 16 mm.
(3) Gap (A): 7 mm.
(4) Pitch ( B ): 8.5 mm.
(5) Screws ( C ): M3. ( D ): 4.5 mm.
(6) Width ( W ): 40 mm.
(7) Ref. width ( W0 ): 28 mm.
(8) Ref. width ( W1 ): 20 mm....
The Spec Of Terminal Block Manufacturers : Shininig E&E TS-015 terminal blocks
1. Specification
(1) Total length ( L ): 8.7 x P + 16.5 mm.
(2) Ref. length ( L1): 8.7 x P + 10 mm.
(3) Gap (A): 7 mm.
(4) Pitch ( B ): 8.7 mm.
(5) Screws ( C ): M3. ( D ): 4.5 mm.
(6) Width ( W ): 38 mm.
(7) Ref. width ( W1 ): 12 mm.
(8) Height ( H ): 28 mm.
2. Materials
....
The Spec Of Terminal Block Manufacturers : Specification
1. Dimensions (LxWxH): 48 x 5 x 47 mm.
2. Conduct sizes
(1) Solid: 0.2~4 mm².
(2) Stranded: 0.2~2.5 mm².
(3) AWG: 22~14.
3. Materials
(1) Barrier materials: nylon.
(2) Color: brown / gray / blue.
(3) Flame retarded grade: UL-94V-0.
4. Accessories & parts
(1) End plate: TF-EP2.5-10.
(2) DIN r....
The Spec Of Terminal Block Manufacturers : Specification
1. Dimensions (LxWxH): 52 x 6 x 47 mm.
2. Conduct sizes
(1) Solid: 0.2~4 mm².
(2) Stranded: 0.2~2.5 mm².
(3) AWG: 22~14.
3. Materials
(1) Barrier materials: nylon / PC.
(2) Color: yellow & green.
(3) Flame retarded grade: UL-94V-0 / UL-94V-2.
4. Accessories & parts
(1) End plate: TF-GEP10.
(....
The Spec Of Terminal Block Manufacturers : Shining E&E TU-8F terminal blocks
1. Specification:
(1) Length ( A ): 95.8 mm.
(2) Width ( B ): 16.3 mm.
(3) Height ( C ): 12.7 mm.
(4) Pitch ( D ): 8 mm.
(5) Mount hole diameter ( E ): 2.9 mm.
(6) Wire hole size ( F ): 2.8 mm.
(7) Screws: M2.6 x 5.
(8) Cross-section area: 1.5 mm².
(9) Base: flat base.
2. M....
The Spec Of Terminal Block Manufacturers : 1. Specification
(1) Total length ( L ): 9 x P + 6 mm.
(2) Gap (A): 7.5 mm.
(3) Pitch ( B ): 9 mm.
(4) Screws ( C ): M3.
(5) Width ( W ): 42 mm.
(6) Height ( H ): 30 mm.
2. Materials
(1) Barrier materials: PC / Nylon 66.
(2) Color: black.
(3) Flame retarded grade: UL-94V-2 / UL-94V-0.
The Spec Of Terminal Block Manufacturers : Specification:
1. Dimensions (LxWxH): 48 x 8 x 47 mm.
2. Accessories & parts.
(1) End plate: TF-EP10.
(2) DIN rail 35mm: yes.
(3) DIN rail 32mm: yes.
(4) End clamp: TF-ECH / TF-ECL.
(5) Marker / label MK: 0...49 / A...Z.
The Spec Of Terminal Block Manufacturers : Shining E&E TF-G4 ground terminal blocks:
Specification:
1. Dimensions (LxWxH): 56 x 8 x 47 mm.
2. Conduct sizes.
3. Solid: 0.2~6 mm².
4. Stranded: 0.2~4 mm².
5. AWG: 22~10.
6. Materials
7. Barrier materials: nylon / PC.
8. Color: yellow & green.
9. Flame retarded grade: UL-94V-0 / UL-94V-2.
The Spec Of Terminal Block Manufacturers : 1. Specification:
(1) Total length ( L ): 20.5 x P + 42 mm.
(2) Ref. length ( L1): 20.5 x P + 26.5 mm.
(3) Gap (A): 16.5 mm.
(4) Pitch ( B ): 20.5 mm.
(5) Screws ( C ): M6.
(6) Width ( W ): 52 mm.
(7) Ref. width ( W1 ): 30 mm.
(8) Height ( H ): 34 mm.
(9) Ref. height ( H1 ): 11 mm.
2. Materials:
(1) Barrier ....
The Spec Of Terminal Block Manufacturers : Product: TGP-085-02A
Dimensions/ specifications
1. Total length (L) [ mm ]: 59.8 (2.354").
2. Ref. length (L1) [ mm ]: 48.0(1.890").
3. Ref. length (L2) [ mm ]: 19.0 (0.748").
4. Ref. length (L3) [ mm ]: 16.0(0.630").
5. Width (W) [ mm ]: 41.0(1.614").
6. Ref. width (W1) [ mm ]:16.0(0.6....
The Spec Of Terminal Block Manufacturers : 1. Models: TB-1503, TB-1504, TB-1506, TB-1512, TB-2503, TB-2504, TB-2506, TB-2512.
2. For further information, please inquire Camsco Electric or visit www.camsco.com.tw.
The Spec Of Terminal Block Manufacturers : 1. This terminal block can be mounted to the rail by single finger operation.
2. For further information, please inquire Camsco Electric or visit www.camsco.com.tw.
The Spec Of Terminal Block Manufacturers : 1. Voltage rating: 125VAC RMS.
2. Current rating: 1.5AMP.
3. Contact resistance: 100 milliohms max.
4. Insulation resistance: 1000 megohms min @ 500VDC.
5. Dielectric strength: 750 AC RMS 60HZ, 1 min.
The Spec Of Terminal Block Manufacturers : 1. Voltage rating: 125 VAC RMS.
2. Current rating: 1.5AMP.
3. Contact resistance: 100 milliohms max.
4. Insulation resistance: 1000 megohms min @ 500VDC.
5. Dielectric strength: 750 VAC RMS 60HZ, 1 min.
The Spec Of Terminal Block Manufacturers : 1. Voltage rating: 125VAC RMS.
2. Current rating: 1.5AMP.
3. Contact resistance: 100 milliohms max.
4. Insulation resistance: 1000 megohms min @ 500VDC.
5. Dielectric strength: 750VAC RMS 60HZ, 1 min.
The Spec Of Terminal Block Manufacturers : 1. Voltage rating: 125VAC RMS.
2. Current rating: 1.5AMP.
3. Contact resistance: 100 milliohms max.
4. Insulation resistance: 1000 megohms min @ 500VDC.
5. Dielectric strength: 750VAC RMS 60HZ, 1 min.
