The Spec Of Auto Parts Manufacturers : *Pendant control voltage transformed into 24V/48V to eliminate possible accident caused by circuit short and assure safe operation in wet environments.
*Automatic motor brake system features simultaneous braking upon power failure or switching off.
*Dual brake system assures safe operation.
*Limit switches hold load....
The Spec Of Auto Parts Manufacturers : The full range from 1.5 t to 10t load capacity, with all kinds of the innovative functions accommodated, give agile and powerful performance for demanding jobs.
The Spec Of Auto Parts Manufacturers : Orris can provide peripheral accessories for gearboxes and other drive systems. MaterialsSteel： SNCM-220、SCM-415、SCM-440、S45CAluminumPlasticStainless SteelBronze： PB2、PBC2、ALBCPowder MetallurgyManufacturing RangeModule : M0.15 ~ M8Max. Outer Diameter : 400 mmMax. Length : 600 mm ....
The Spec Of Auto Parts Manufacturers : High quality and precision valve stem seals for DAIHATSU.
1. 90048-12005: engine model-AB, AD, CB, CL.
2. 90048-12009: engine model-EB, EF, EF-CS/ CL/ KL/ NS/ TS/ VS.
3. 90048-12011: engine model-HB, HC, HC-C/ E/ F, HD. We accept order of OEM and ODM, welcome customers’ drawing and samples for cooperation ....
The Spec Of Auto Parts Manufacturers : 1. High oil film can effectively protect and extend engine life, reduce the degree of dilution at high temperatures and increased wear resistance.
2. High shear force environmental additives, engine horsepower and long play at the highest driving horsepower to stay intact forever.
The Spec Of Auto Parts Manufacturers : FEATURE
1.Slide table reverse 180° system.
2.Pneumatic slide TDC lock.
3.Slide table hydraulic lock.
4.Bolster hydraulic positioning lock system.
5.Bolster automatic hub device.
6.Optical scale precision positioning device.
7.Automatic Human-machine interface operation system.
8.Ratio valve, pressure and flow ....
The Spec Of Auto Parts Manufacturers : Feature:
-Microfiber tiny construction, remove dirt from surface more effected, no trace 7 times it's own weight absorbency, 2 times cotton product.
-Durable use, better and stronger than cotton product, washable and can be reuse 1,000 times over. please see the attached file. ....
The Spec Of Auto Parts Manufacturers : 1. Rating: 3A~20A.
2. Input power: 125/250Vac 32Vdc (UL).
3. Reset time: within 60 sec.
4. Calibration: overload 200%: 6~25sec. We supply our best quality packaging materials and on time delivery to you requirement by OEM/ODM. ....
The Spec Of Auto Parts Manufacturers : 1. Rubber parts, o ring, gasket, auto parts, motorcycle parts.
2. Innovative and excellent qualities.
3. Professional vehicle and mechanical oil seals.
4. Meet clients' needs, bringing them great advantages in market competition.
The Spec Of Auto Parts Manufacturers : 50psi, A/V, tire pressure indicator, silver color 50psi, A/V, tire pressure indicator, silver color special after market package is also available upon request. ....
The Spec Of Auto Parts Manufacturers : Mountop Precision provides customers with heat-treatment finishing work, specializing in heat-treatment of high-speed steel and steel molds. In response to customer demand, Mountop Precision began the research and development of our own products, establishing a tool manufacturing plant producing cold-and hot-pressing p....
The Spec Of Auto Parts Manufacturers : Shin Fang Plastic Industrial Co., Ltd. which mainly produce cart system, side wheel, side release buckle, hook, loop, ring, ladder lock, cam buckle, slide, cord lock, stud, washer, eyelet, shoulder pad, foot stand, pad, strip, handle, bottom case, two colors molding product, diving case, utility box, tackle box, snap f....
The Spec Of Auto Parts Manufacturers : 1. Material: aluminum.
2. Size: custom.
3. Color: custom. 1. Use: automotive wiper component.2. Specification: OEM/ODM. ....
The Spec Of Auto Parts Manufacturers : There are girders & drive shaft support in the chassis for general RV engine designing of main Structure. But the top of the suspension system is only fixed by the body sheet metal, and the difference between the upper and lower support strengths is too large, so one is installed at the engine room body sheet metal....
The Spec Of Auto Parts Manufacturers : Radio control car components, auto racing car parts, toy metal parts. We supply our best quality products and on time delivery to you requirement. ....
The Spec Of Auto Parts Manufacturers : A netting designed to provide shade and control the amount of sunlight that enters the greenhouse, thereby creating a more favorable environment for crops. The net is made from High-Density Polyethylene(HDPE), which is a durable and UV-resistant material. 50 percent, 60 percent, 70 percent, 80 percent sunsha....
The Spec Of Auto Parts Manufacturers : 1. Type: patch antenna with 3M adhesive sticker at back side.
2. Frequency: Quadbands for 824-960/1710-1990/2.2 G.
3. Gain: 3dBi. 1. Size: PCB antenna 10.4 (L) x 1.2 (W) x 0.4 (H) cm.2. Connector: available with FME, TNC, SMA.3. Cable: RG174 for 3 meters. ....
The Spec Of Auto Parts Manufacturers : We can guarantee:
• 101 iSaver carbon reduction and energy-saving device does not contain any chemical substances, and will not melt, and doesn’t affect the machine function.
• To use 101 iSaver reduce carbon emissions & energy-saving devices will not affect your car’s warranty .
• This product has TUV....
The Spec Of Auto Parts Manufacturers : 1. Size: 53mm (Dia) x 56mm(L).
2. Voltage: DC 12V.
3. Size: 1-tone.
4. Output: 118DB.
5. Packing: 100pcs / 1.4CFT. We also signed contracts with several companies in various countries as their strobe light OEM supplier. ....
The Spec Of Auto Parts Manufacturers : WDF DAMPERS can be designed according to different loadings and functions made with the adjusted dyno and lengths to reach the good efforts of smooth moving, less shaking and easy lifting. Damping forces can be arranged independently in compression or extension direction. ....
The Spec Of Auto Parts Manufacturers : 1. Sample purchase.
2. This is mast reach electric stacker.
3. It use wide view mast, it can be easily see through.
4. It is controlled by steering arm, the operators do not need forklift truck driver's license for most countries.
5. It has no noise & no pollution.
6. Microprocessor charger with equal....
The Spec Of Auto Parts Manufacturers : 1. Product name: motorcycle battery.
2. Product No.: 6N2-2A. 1. Battery type: 6N2-2A2. Capacity ah (10h-r):2.3. Maximum dimensions: (1) Inch±1/6 in ( L x W x H): 2 3/4 x 1 7/8 x 3 3/4. (2) Millimerer ± 2mm (L x W x H): 70 x 47 x 96.4. Weight with acid (kg/lbs): 0.6/ 1.3.5. Acid volume (liter): 0.1.6.....
The Spec Of Auto Parts Manufacturers : Motor parts for car, motorcycle, automobile, miscellaneous. Miscellaneous size for customers. ....
The Spec Of Auto Parts Manufacturers : 1. From automobiles construction to making airtight containers, our o-rings and rubber seals are useful in many areas.
2. Our rubber and sponge washers and spacers help silence vibrations and limit stress on contacting parts.
3. O-rings are a functional part with much utility. We carry silicon, viton, Teflon, buna-....
The Spec Of Auto Parts Manufacturers : Water Pump Product Features:
1. Compact Design, Small Size, Easy to install and dismantle
2. High Quality and high efficiency. Water Pump Operating Conditions: 1. Liquid temperature: Max. 60C 2. Ambient temperature: Max. 50C 3. Working pressure: Max. 5 kg/cm2 4. Suction lift:6M 5. Suitable for transport clean wa....
The Spec Of Auto Parts Manufacturers : We have developed all kind of HONDA series, please refer to the following list, if you can't find what you need, please download complete catalog or contact with us.
we can develop any new items for you without mold charge ... ( ASSY also available )
The Spec Of Auto Parts Manufacturers : For signal light:
1. For the aforesaid specification, the brightness and other colors can be added according to the chips required by the customer.
2. The LED gel shape is available for change upon the requirement of the customer for changing the size of illumination angle.
3. Normally, this product uses DC current ....
The Spec Of Auto Parts Manufacturers : We can service from single shot plastic injection mold, two-short plastic injection mold, hot runner mold, gas assistant plastic injection mold, to multi-cavity plastic injection mold. 1. All plastic parts product size: from 3cmx1cm to 130 cmx35cm.2. Various color provide.3. Customer specification required. ....
The Spec Of Auto Parts Manufacturers : With precision machinery and complementary software, we offer ODM & OEM services for gearboxes at a highly competitive price. 1. Length: 50.0mm.2. Diameter: 10.0mm.3. Height: 00.0mm.4. Weight 260g.5. Gear material: POM, Steel ....
The Spec Of Auto Parts Manufacturers : The cable is made with auto-special cord. RoHS compliance. Customer design is available. 0.85mm2~1.25mm2 flexible insulated cable terminal and housing:
1. W: 0.250”-1P × 5set.
2. ID: 0.21”-1P × 3set.
3. CFF300-5/8AWG，PVC black tube.
4. CV-100 cable tie × 2set. ....
