Select
The Spec Of Car Parts Manufacturers : 1. Providing different accessory to satisfy the customer’s need. The attachments come out differently due to the different need for the different operation places. Special equipment like vertically standing exhaust pipe, warning light, rear light, wet-type air filter and fork attachment, etc.
2. It saves your energ....
Select
The Spec Of Car Parts Manufacturers : 1. Compliant with bluetooth class 2 V1.2.
2. Built-in S/W AEC cancellation to reduce echo and background noise.
3. Handsfree function for car kit, con-call device, amplified speakers, etc. 1. Audio output power: 2W x 2 (RMS).
2. Supported AA battery x 4 for portable.
3. Supported analogue audio line-in.
4. O....
Select
The Spec Of Car Parts Manufacturers : The R-9 vehicle tracker is designed for vehicle security and fleet management. Its rugged metal casing and wide range temperature operation are designed to withstand severe environments. It is equipped with 13 configurable I/O cables, which allow fleet administrators to monitor not only the whereabouts but also the sta....
Select
The Spec Of Car Parts Manufacturers : 1. Content: specs.
2. Size: 6.2 X 3.3 X 10.3 cm.
3. Weight: 110g.
4. Network: GSM/GPRS.
5. Band: 850/1800/1900Mhz or 900/1800/1900Mhz.
6. GPS chip: SIRF3 chip.
7. GPS sensitivity: -159dBm.
8. GPS accuracy: 5m.
9. Time to first fix: reacquisition 0.1s; cold status 45s; warm status 35s; hot status 1s. 1. Car....
Select
The Spec Of Car Parts Manufacturers : 1. This specification applies to FM/ AM varator tuner and FCC and E- mark authentication.
2. Unit should not have any excessive stain, bruise, uneven plating, etc which decrease its commercial value.
3. Receiving system.
(1) FM section: super heterodyne ( upper side oscillation).
(2) AM section: double heterodyne....
Select
The Spec Of Car Parts Manufacturers : 1. These LED lightings are substitution of halogen lightings E27. It has high ruminant efficiency by using super bright LED.
2. There are discoloring lamps composed of R, G and B primitive colors.
3. Which can constitute various colors.
4. They can display in flashing, tracing and lighting one by one. 1. Feat....
Select
The Spec Of Car Parts Manufacturers : 1. Working voltage: 12V / 24V.
2. Color: red, green, blue, amber, white.
3. Socket: 1156, 1157, 3156, 3157.
4. No. of LED: 12, 19, 24, 27, 32, 36.
5. Superflux led used to achieve max. brightness. 1. Trademark: QUASAR.
2. Model: TB-36.
3. Standard: CE, RoHS, ISO9001. ....
Select
The Spec Of Car Parts Manufacturers : Rubber O-ring, suitable for automotive, electronics, audio players, and video players. Custom O-ring, made of NR, EPDM, NBR, SBR, silicone, and neoprene materials. ....
Select
The Spec Of Car Parts Manufacturers : AV hi-fi system karaoke amplifier:
1. The newly-developed microphone digital sound processing circuit(32bit dsp): treble is clear and exquisite; middle tone is mellow and vigorous.
2. General echo sound effect and professional reverb mode can be controlled independently with stepless adjustable function.
3. Microp....
Select
The Spec Of Car Parts Manufacturers : 1. Fully programmable fleet management capabilities.
2. Siemens MC55/56 GSM module, NGR-531 SirF Star III A-GPS single chip.
3. Communication: GSM, SMS, GPRS, data line communication.
4. Support: TCP/IP protocol.
5. GPS: support 20 GPS channels, all in view tracking.
6. RS232C (USB).
7. Normal vehicle activity.
....
Select
The Spec Of Car Parts Manufacturers : Rubber part:
Compression, transfer, and injection molding, extruding, and other fabricating services. Fully automatic machinery equipped for making high volume parts. Various materials and hardness for all kinds of application, NR, SBR, ACM, EPDM, NBR and so on, depending on customer's requirement. ....
Select
The Spec Of Car Parts Manufacturers : We can service from single shot plastic injection mold, two-short plastic injection mold, hot runner mold, gas assistant plastic injection mold, to multi-cavity plastic injection mold. 1. All plastic parts product size: from 3cm*1cm to 130 cm *35cm.
2. Various color provide.
3. Customer specification required. ....
Select
The Spec Of Car Parts Manufacturers : 1. High voltage and insulation resistance tested.
2. Safe design.
3. SELV circuit.
4. Fire - resistant PCB.
5. Improved rated current for lower heat. 1. Input: DC 12 - 24V.
2. Output DC 5V 1A.
3. Plug and play function, used in car. ....
Select
The Spec Of Car Parts Manufacturers : AVL GPS tracking system with geofencing and CS data function, for transportation or fleet management. 1. Voice, SMS, CS data, GPRS communication.
2. Remote and direct parameter setting up.
3. Remote and direct power management configuration.
4. Remote and direct time zone (GMT) adjustment.
5. Remote and direct ....
Select
The Spec Of Car Parts Manufacturers : 1. Battery tray option.
2. Long life raction system.
3. The traction unit is mounted centrally, special stronger gear box makes long life of sperately excited motor. It's external position ensures adequate ventilation.
4. Standard grease fitting on pivot points.
5. Driving performace can be adjusted by programe....
Select
The Spec Of Car Parts Manufacturers : 1. Used for automotive.
2. Base number: BAY15D (double filaments).
3. Decoration: brake driving light.
4. Color: red, blue, green, white, yellow, super red. 1. LED quantity: 16pcs.
2. Voltage (V): 12. ....
Select
The Spec Of Car Parts Manufacturers : Every wire harness is produced by Gamma 333PC fully automatic crimping machine according to IPC-A-620 workmanship standard and assembled together according to customers' specifications. 100% electrical test is provided on function, short and open circuit, hi-pot and insulation resistance. We can produce any size an....
Select
The Spec Of Car Parts Manufacturers : 1. Helps keep interior cool during driving.
2. High visibility.
3. Stop sun heat.
4. Double side screen. 1. Size: 43 x 55cm.
2. Material: PVC or Polyester.
3. Packing: 1pc / set, 50set / ctn / 4.3'. ....
Select
The Spec Of Car Parts Manufacturers : 1. With LED lights.
2. Color for car body: biege. 1. Battery for car: Ni-MH 9.6V/ 600MAH NI-CD.
2. Battery for transmitter: 9V.
3. Charger output: DC 7.2v 250mA.
4. Frequency: 27Mhz. ....
Select
The Spec Of Car Parts Manufacturers : Magnet holds nuts, bolts in place, suitable for tight applications. 1. 1/4” Dr., 3/8” Dr., 1/2” Dr.
2. Magnet strength: 1/4” Dr.–0.45lbs, 3/8” Dr.–0.9lbs, 1/2” Dr.– 1.35lbs.
3. For specific infromation, please check our official website: http://www.tien-i.com/h-accessories_universal-ma.html ....
Select
The Spec Of Car Parts Manufacturers : 1. ACR series number.
2. Dirameter: 10". 1. Model:
(1) ACR-10.
(2) ACR-12.
(3) ACR-14.
(4) ACR-18.
2. Dirameter: 10"/12"/14"/18".
3. Block size: 8"/10"/12"/16".
4. Weight(kg): 1.09/2.87/3.82/6.8. ....
Select
The Spec Of Car Parts Manufacturers : 1. Available in full range of single-color: red, yellow, blue, green, white etc.
2. Easy to install by the 3M tape on the PCB back.
3. Low power consumption. high intensity.
4. Beam angle: 140 degrees.
5. Easy connection with snap-in connectors.
6. Solid-state, high shock and vibration resistant.
7. No RF inte....
Select
The Spec Of Car Parts Manufacturers : Drum testing machine with auto step control by computer. Including 30 steps of speed & load auto change by computer control, monitor, printer, key board.
1. AW-TT-1 for truck & bus.
2. AW-TT-2 for L/T & P/C.
3. AW-TT-3 for M/C & S/C.
4. AW-TT-4 for L/T, P/C+M/C, S/C.
5. AW-TT-5 for OTR. ....
Select
The Spec Of Car Parts Manufacturers : High Intensity Discharge lighting system offers superior performance over conventional halogen incandescent lights. HID has been used widely for many years for sports arenas, stadiums, and aircrafts. Key features of ballast:
1. Wide input voltage: 8-32 VDC.
2. Excellent stability: no flickering during warm up an....
Select
The Spec Of Car Parts Manufacturers : 1. No need to cut hood or drill any hole. Easy installed by self-adhesive tape.
2. Realistically tuning appearance. For decoration without hood pin function. 1. Body: ABS black.
2. Key hole: stainless steel.
3. Size: 125 x 70 x 2.5mm.
4. 2pcs / 1set. ....
Select
The Spec Of Car Parts Manufacturers : 1. GV-D12 is one of our standard gearboxes, and its gear ratio can be adjusted for various applications.
2. Factory locations: Taiwan and Guangdong province of China. 1. Dimensions: 90mm L x 65mm W x 20mm H.
2. Voltage: DC 12V (flexible).
3. Gear ratio: 1:873 (flexible).
4. Torque: 8 kg w.cm (flexible).
5. Rot....
Select
The Spec Of Car Parts Manufacturers : 1. Precision spur gear.
2. Helical gear.
3. Chain sprockets.
4. Straight bevel gears.
5. Worm wheels.
6. Splined shafts.
7. Pin clutches.
8. Flanges.
9. Bosses.
10. Bushes. 1. Quality class: AGMA-16 grade / DIN-2 grade / JIS-0 grade.
2. Quantity: gear-800,000 pcs/year; shafts-1,200,000 pcs/year; others-1,....
Select
The Spec Of Car Parts Manufacturers : Steel materials selection and professional cooling design would be crucial for productivity improvement, which plays a vital role to cost evaluation. 1. Cavity: 1 + 1.
2. Part resin: PP.
3. Core steel: 1.2738 (28 ~ 32HRC).
4. Cavity steel: 1.2738 (28 ~ 32HRC).
5. Mold base: LKM standard.
6. Ejection: guided by....
Select
The Spec Of Car Parts Manufacturers : 1. Super jump starter battery(12V/2600MA lead-acid battery).
2. 12V connect cord includes 12V/10A fuse for surge protection.
3. Power indicator.
4. Emergency blinker.
5. Super strong vacuum cleaner.
6. Super bright falshlight.
7. Super strong air compressor: 300lbs/inch"(21kgs/cm").
8. Accessory ....
Select
The Spec Of Car Parts Manufacturers : Mechanical custom hardwares. We can produce any sizes and styles as your request. For more details please refer to the appendix. ....