The Spec Of Other Air Tools : Auto control industrial wet/dry vacuum cleaner:
1. CY-9521: single pipe.
2. CY-9522: double pipes.
(No pneumatic tools are included.) 1. Power: 1000-1350w.2. Voltang: 110v.3. Extra capactiy 48l.4. 220v cleaner can be ordered. ....
The Spec Of Other Air Tools : * Features
．360° Adjustable Air Deflector
．Depth-Of-Drive Adjustment
．Toe-Nailing Teeth For Slip-Free Grip
．No-Mar Rubber Pad
．Sequential Fire Trigger Available (#30805301A)
* Fasteners
21° Full Head Plastic Collated Strip Nails
．ø.122 - .161" / 3.1 - 4.1 mm
The Spec Of Other Air Tools : 1. The fix-up color cup type with double-action push-button control allows variation of spray pattern without stopping.
2. Adjustable needle locknut holds spray pattern from hair line to broad shading.
3. Excellent for photo-retouching, technical and medical illustrations, precise model markings, line hobby crafts, e....
The Spec Of Other Air Tools : Faster & Cleaner Metal Cutting.
The Spec Of Other Air Tools : 1. Product Introduction
2. Specifications: PC PLASTIC BODY W/4 BITS SCREW DRIVER & 8/10mm WRENCH(PH#2.3, HEX #4, FLAT#7)
3. Material: PC SCREW DRIVER FOR SNOWBOARD, BIKE, AND SKATE BOARD USE. ....
The Spec Of Other Air Tools : 1. Light weight: adopt POM body, so it's lighter and easier operation than traditional metal guns.
2. High safety: plastic body features good insulation and safety.
3. Big airflow: auxiliary air holes adopt bevel angle to increase air flow.
The Spec Of Other Air Tools : *Product Name: 1/2" Sq. Dr. IMPACT WRENCH (PIN CLUTCH)
*Model: AT-8113-P * Bolt capacity… 5/8" ( 16 mm )* Max torque… 450 ft-lb (62 kg-m, 610 N-m )* Free speed… 7000 r.p.m.* Air consumption (cfm)… 12* Air inlet (PT)… 1/4"* Air pressure… 90 psi* Net weight&he....
The Spec Of Other Air Tools : 1. Powerful Output (0.6 HP), the general output as this kinds of tools is around 0.3 HP.
2. The handle is ergonomically designed with good touch feeling and skid-proof effect.
3. Speed could be adjust.
4. 360 degrees adjustable exhaust type design.
5. The handle material characteristics almost unchanged and it coul....
The Spec Of Other Air Tools : PS-1005A Air Rivet Nut Tools-
Air Inlet-----1/4''
Air Hose-----3/8'' Blind Rivet Setting Capacity (mm) -----M4,M5,M6,M8,M10,M12Traction Power ----- 6012 lbs(2727 kgs)Stroke Length ----- 21/32’’(16.5mm)Overall Height ----- 13-3/8’’(340mm)Net Weight ----- 8.73lbs(3.96kgs) ....
The Spec Of Other Air Tools : *High volume low pressure spray gun supply 10 psi low pressure through the air cap which make the spraying softer, easily controlled and less over spray in high transfer efficiency.
*Includes adjustable fluid, pattern and air controls.
*Designed to provide equal atomization and particle size for all kinds of surfac....
The Spec Of Other Air Tools : Product Feature
*Spray distance:200mm.
*Paint viscosity: 20sec./RV-2.
*Nozzle and needle are made of heat treated material with the character of high hardness, antiwear so as to lengthen in-service life.
The Spec Of Other Air Tools : Special York/ Tecumseh, Chrysler RV-2 (two cylinder) seal set
All specialized tools needed to replace seals on the above compressor used with tools of 58501 Clutch Holding Tool from 59012. 1. Oil level dip stick.2. 5/8" clutch remover. ....
The Spec Of Other Air Tools : * Side-to-side stroke.
* Special design enable the easiest method of changing the consuming or worn out parts.
* Ideal for filing, lapping and polishing shallow surfaces, deep ribs and parting lines. Will not slip away from sharp edges.
The Spec Of Other Air Tools : 1. Operating Air Pressure: 90 psi , 6.3 kg/cm²
2. Packing Pcs/N.W/G.W/Cut (kg): 20/Ctn/18 kg /1.33’
3. Sug. Air Comp. (HP): 2(HP)
The Spec Of Other Air Tools : SIZE:1/4"
FREE SPEED:15000rpm
AIR COMSUMPTION:12scfm
WEIGHT:0.75lb/0.3kg
LENGTH:4.92"/125MM
NOISE:82DB
EXHAUST SYSTEM:REAR EXHAUST Please refer to the attached file for the specification details. ....
The Spec Of Other Air Tools : 1. Product name: carton sealers pneumatic. 1. Magazine capacity: 100 pcs.2. HxLxW: 220 x 415 x 115 mm.3. N.W.: 2.65 kgs. ....
The Spec Of Other Air Tools : -10 Pcs/13.5 Kgs./17.4 Kgs./0.93’
-Mechanism: Pin Clutch
-Highest durable grade steel anvil
-Front exhaust
-Forward：3 positions, Reverse：1 position
-Light torque with stability and smoothnes
-Die casting of housing
-Components with durable and heavy duty materials
The Spec Of Other Air Tools : -10 Pcs/24.0 Kgs./25.0 Kgs./1.71’
-Mechanism: Twin Hammer
-Highest durable grade steel anvil
-Handle exhaust
-Powerful torque and excellent continuity in the same tool’s field
-Light weight with composite material
-Forward 3 position；Reverse：1 position
-Hose fitting can swirl
The Spec Of Other Air Tools : -10 Pcs/26.00 kgs./29.89 kgs./1.71’
-Mechanism: Twin Hammer
-Highest durable Japanese steel anvil
-Handle exhaust
-Forward 3 position；Reverse：2 position
-Components with durable and heavy duty materials/li>
-Muffler available
-Die casting of housing
-Kit set available：sockets – 26, 27, 29, 30, 32, ....
The Spec Of Other Air Tools : -4 Pcs/20.0 Kgs./22.0 Kgs./1.15’
-Mechanism: Pin Clutch
-Hand push reciprocating forward-reverse switch, and high-low speed regulator
-Highest durable grade steel anvil
-Front exhaust
-Powerful, stable and continuous torque
-Components with durable and heavy duty materials
-Quieter operation, less vibration
-....
The Spec Of Other Air Tools : -1 Pc/15.2Kgs./17.0 Kgs./1.32’
-Mechanism：Twin Hammer
-Highest durable Japanese steel Anvil (2” & 8” optional)
-Top exhaust
-Forward & Reverse：4 position for each side
-Heavy duty casting of housing & slant air inlet
-Components with durable and heavy duty materials
-Inside or outside trigg....
The Spec Of Other Air Tools : Application for the wooden furniture, metal, plastics, leather liquid coating. Can use in the color paint, sealer, top coat spray. Save paint, spray even, high atomizing.
The Spec Of Other Air Tools : • Special design for making machine with sponge very stable for Auto-Detailing application.
• Good hand touch feeling silica buffer material to enhance operator comfort and prevent machine slipping to make operator use more smoothly . It also use high quality sanding pad and bearings(made in Japan) to make machine....
The Spec Of Other Air Tools : 1.The handle is ergonomically designed with good touch feeling and skid-proof effect.
2.Speed could be adjust.
3.360 degrees adjustable exhaust type design.
4.The handle material characteristics almost unchanged and it could still keep good flexibility at between -60 degree and 150 degrees or exposure to UV, wind an....
The Spec Of Other Air Tools : • True 12,000 RPM air motor. High density iron rotor utilizes five blades of special material to make acceleration of gravity for producing more usable power.
• Good hand touch feeling silica buffer material to enhance operator comfort and prevent machine slipping to make operator use more smoothly . It also use h....
The Spec Of Other Air Tools : *10 PcS/15.48Kgs./16.48Kgs./0.93’
*Mechanism: Jumbo Hammer
*Highest durable grade steel anvil
*Handle exhaust
*Forward：3 positions, Reverse：1 position
*Light torque with stability and smoothnes
*Die casting of housing
*Components with durable and heavy duty materials
The Spec Of Other Air Tools : *1 Pcs/16.0Kgs./17.5 Kgs./1.32’
*Mechanism: Pin Less
*Highest durable Japanese steel Anvilwith long lifespan
*Front exhaust
*Forward & Reverse：3 position for each side
*Lever reverse is with a red rubber for protecting hand
*Components with durable and heavy duty materials
*Inside or outside trigger avai....
The Spec Of Other Air Tools : *2 Pcs/15.9 Kgs./17.8 Kgs./1.1’
*Mechanism: Twin Hammer
*Highest durable Japanese steel Anvil (2” & 6” optional)
*Front slant exhaust
*Forward & Reverse：3 position for each side
*Light weight with high torque
*Components with durable and heavy duty materials
*Die casting of housing
The Spec Of Other Air Tools : *1 Pc/15.2Kgs./17.0 Kgs./1.32’
*Mechanism：Twin Hammer
*Highest durable Japanese steel Anvil (2” & 8” optional)
*Top exhaust
*Forward & Reverse：4 position for each side
*Heavy duty casting of housing & slant air inlet
*Components with durable and heavy duty materials
*Inside or outside trigg....
The Spec Of Other Air Tools : *10 Pc/15.0Kgs./16.00Kgs./0.8’
*Mechanism： Jumbo Hammer
*Highest durable Japanese steel Anvil
*Handle exhaust
*Forward 3 position；Reverse： 2 position
*Components with durable and heavy duty materials
*Die casting of housing
*Two piece housing for easy service
*Short Length: Only 3 3/4” from front to r....
