Select
The Spec Of Power Tool Manufacturers : 1. Into force: 1050W.
2. Current: 9.5A.
3. No-load speed: 4500rpm. 1. Cutting depth at 45: 46mm.
2. Cutting depth at 90: 66mm.
3. Cutting angle: 0 - 45°.
4. Saw the largest size: 190mm.
5. Insulation level: class E. ....
Select
The Spec Of Power Tool Manufacturers : 1. 2 in 1 drywall stopper set.
2. 1/4" hex drive shank w/ a revolving metal collar. 1. B021S5B: 2PC 25MM PH#2 W / A revolving collar.
2. B022S5B: 2PC 50MM PH#2 W / A revolving collar. ....
Select
The Spec Of Power Tool Manufacturers : High standard specification as standard, SX3 chain hoists provide a high specification:
1. Two speed hoisting.
2. Frequency controlled trolley drives for smooth traversing and minimal load swing.
3. Upper and lower hoist limit switches.
4. Slipping clutch load limiter.
5. Hoist motors insulated to class F, 40% ED....
Select
The Spec Of Power Tool Manufacturers : Screwdrivers:
1. " - " Shape: 3 x 80, 4 x 100, 5.5 x 125, 6.5 x 30, 6.5 x 150, 8 x 175mm.
2. " + " Shape: 0 x 60, 1 x 80, 2 x 100, 3 x 150mm.
3. 1pc cushion screwdriver handle.
4. 1pc flexible shaft.
5. 1pc electric tester 120V-250V.
6. 1pc 6" long nose plier.
7. 1pc 6" diagonal....
Select
The Spec Of Power Tool Manufacturers : 1. Product name: 3/8"DR. Universal socket, 6-point.
2. size: 10(mm).
3. L: 46(mm).
4. Weight: (g): 52.
5. ASME/ANSI B107.1-1993. For more information of the universal joint socket, please view our official websit:
http://www.tien-i.com/h-universal.html ....
Select
The Spec Of Power Tool Manufacturers : 1. 2" ~ 3" high speed sander & grinder.
2. Net weight: 0.68 kg.
3. Avg. air cons: 0.4 m³/min.
4. Air inlet: 1/4". 1. Free speed: 15000 rpm.
2. Air pressure: 6 kg/cm².
3. Tool length: 160 mm. ....
Select
The Spec Of Power Tool Manufacturers : Many workshops are just not large enough to handle full size panels. Here's the solution. Your own panel saw. Just slide the panel into place, adjust for position and cut. It leans against the wall and stands only 2 feet out from it. Fasten it in place for added safety. Use your standard circular saw as the cutter. Ki....
Select
The Spec Of Power Tool Manufacturers : 3/8" pin clutch mechanism air impact wrench. 1. Square drive: 3/8".
2. Cap.bolt size: 1/2",(13mm).
3. Net weight: lbs: 3.23 lbs (1.47kgs).
4. Overall length: 6 1/2" (165mm).
5. Avg.air consumption-5.3 cfm.
6. Air hose (i.d.): 3/8".
7. Air inlet: 1/4" (pt).
8. Free speed: 10.000 ....
Select
The Spec Of Power Tool Manufacturers : 1. Product name: fine wire air stapler. 1. Fastener compatible dodels: MAX TA20A/1013J.
2. Fastener:
(1) Crown: 11.2 mm (0.44in.).
(2) Shank width: 1.2mm (0.047in.).
(3) Shank thickness: 0.6mm (0.024in.).
(4) Length: 6-13mm (1/4~1/2"in.).
(5) Gauge: 20 B.W.G..
(6) Packing: 10PC/CTN/10KG/11KG/0.9'....
Select
The Spec Of Power Tool Manufacturers : 1. Engine model No.: HT-321.
2. Engine type: 2 cycle, single cylinder, forced air-cooled, gasoline engine. 1. Displacement: 33 c.c.
2. Horse power: 1.7 HP/ 6500 R.P.M.
3. Carburetor: float type.
4. Ignition system: electronic CDI.
5. Spark plug: champion CJ8.
6. Fuel mixture (petrol): mixed fuel of gasoline a....
Select
The Spec Of Power Tool Manufacturers : Electric screw driver (power screw gun):
1. Collated screws.
2. Wholesale or retail.
3. Belt screw/strio screw.
4. 2009 new product. 1. Moq 300 sets.
2. Voltage: 230V 50Hz /110V 60Hz.
3. No load speed: 0- 4000 R.P.M.
4. Power input: 550W.
5. Screw length: 15-55 MM.
6. Screw outer diameter: 3-5 MM.
7. Weig....
Select
The Spec Of Power Tool Manufacturers : 1. Provides for high quality topcoat finishes in automotive, furniture, construction etc.
2. Compact and lightweight.
3. Easily maintained. 1. Air pressure: 3.5-5 Bar (50-70 Psi).
2. Air inlet: 1/4".
3. Fluid inlet: M16 x 1.5P.
4. Air consumption: 14 Cfm (396 L/min).
5. Weight: 1.3 Lbs (.6 Kg).
6. Capac....
Select
The Spec Of Power Tool Manufacturers : 1. Patented, twin piston designed for greater productivity.
2. Patented, bracket easy to install.
3. Patented, variable speed control trigger with electric brake.
4. Patented, ergonomic anti-fatigue carrying strap.
5. As low as 2.5 minutes to dispense one 14 oz. (397g) grease cartridge (at normal pressure).
6....
Select
The Spec Of Power Tool Manufacturers : Hammer tackers & professional staples the ergonomically designed grip and easy squeeze operation allows for continual usage with minimum fatigue.Perfect for a number of applications, this staple gun can drive staples into some of the toughest surfaces. 1. 4~8mm available for: ARROW (R)JT-21.
2. Stanley #A/53, ESCO....
Select
The Spec Of Power Tool Manufacturers : Features:
1. Positive retention of wire rope on to drum.
2. Electromagnetic spring-applied fail safe brake.
3. Heavy duty high efficiency ball bearing on all running surfaces.
4. Planetary gearing for maximum mechanical efficiency.
5. Enclosed drum flanges.
6. Quiet running.
7. Heavy duty IP65 waterproof switch ....
Select
The Spec Of Power Tool Manufacturers : Electric screw driver (power screw gun):
1. Collated screws.
2. Wholesale or retail.
3. Belt screw/strio screw.
4. 2009 new product. 1. Moq: 300 sets.
2. Voltage: 230V 50Hz /110V 60Hz.
3. No load speed: 0- 4000 R.P.M.
4. Power input: 550W.
5. Screw length: 15-55 MM.
6. Screw outer diameter: 3-5 MM.
7. Wei....
Select
The Spec Of Power Tool Manufacturers : 1. Power output: 450w.
2. Amp: 4.3A.
3. Chuck capacity: 13mm.
4. In wood: 30mm. 1. In steel: 13mm.
2. R.P.M: 1,250.
3. Net weight: 3Kg.
4. Cord lengh: 2.5m(8.2"). ....
Select
The Spec Of Power Tool Manufacturers : Working method: drilling / HRA54°. 1. Density: 7.0g/cm3.
2. Weight: 20.4g. ....
Select
The Spec Of Power Tool Manufacturers : Swed Co., provides die casting pneumatic parts for nail strike tool, spray gun, paint compressor, mixer and rivet tool more than 15 years. Swed produces more than 30k pcs of die casting pneumatic tool parts every month. 1. Material: JIS ADC 10 which is same grade of Alcoa A380, Alcon B143, ASTM SC84A, BS LM 24, ISO....
Select
The Spec Of Power Tool Manufacturers : 1. High hardness, tenacity and precision.
2. Optimal high torsion and excellent wear-resistant.
3. Finished: sand blasted / black / brass silver / chrome-plating. 1. Includes: phillips insert bit, drywall insert bit, phillips insert bit, pozidriv insert bit, pozidriv non-slip rib insert bit, slotted insert bit, s....
Select
The Spec Of Power Tool Manufacturers : 1. Light weight, easy operation, high safety, long durability, paint saving, suitabel for all kinds of painting conductive workpieces.
2. Can be more properly adjusted current as per different electric conduction of paint. 1. High voltage output design is greater to adjusting range and wider utilization than other....
Select
The Spec Of Power Tool Manufacturers : 1. Repairing tool.
2. Functional products of hammers, levels, scrapers, ratchet wrench handles, hand saws, multi-tools, tool kits.
3. 3/4 inch heavy duty impact wrenches (pin-clutch). 1. Square drive: 3/4" (19mm).
2. Bolt capacity: 1" (25mm).
3. Net weight: 10.6lbs (4.8kgs).
4. Length: 9 1/2"....
Select
The Spec Of Power Tool Manufacturers : 1. Full-automatic.
2. Trigger start clutch type.
3. AC110V~120V, 50/60Hz, 0.3A
4. Other model No.: TM-8110L/TM-8116L. 1. Lengh: 235mm (without bit).
2. Weight: 540g (without cable). ....
Select
The Spec Of Power Tool Manufacturers : 1. Perfect for both contractors and remodelers, our saws are built tough yet light for ease of movement to any job site. Every design detail was considered to maximize rigidity, strength, and reliability while minimizing weight.
2. One example of our engineering was the use of an AC induction motor instead of the nois....
Select
The Spec Of Power Tool Manufacturers : 1/4" (6mm) mini die grinder, RPM: 25000. 1. Capacity: 1/4"(6mm).
2. Free speed: 25,000 RPM.
3. Overall length: 5 1/2"(140mm).
4. Air inlet: 1/4"(PT).
5. Avg. air cons.: 4CFM.
6. Net weight: 1.54LB (0.7KG).
7. Packing: 20/CTN/15/0.75'. ....
Select
The Spec Of Power Tool Manufacturers : 1. 3" inch shielded driver.
2. Function: audio cabinets or home theatre.
3. Usage: home audio/hi-fi system.
4. Main material: p.p cone, Fe frame, magnet.
5. Cone color: white. 1. Impadance: 8 Ohm.
2. Minimum frequency response: 137Hz.
3. F0: 20K.
4. S.P.L.: 82.0dB/W(m).
5. Rated input: 10W.
6. Music ....
Select
The Spec Of Power Tool Manufacturers : 1. Motor: Using E Class Winch only motor, high starting torque, reliable, durable and for frequently use.
2. Gearbox: Aluminium alloy high strength good ductility, manufactured by CNC machine, high accuracy, total enclosure design with lube oil leak free.
3. Transmission shaft: Using special alloy extra-high streng....
Select
The Spec Of Power Tool Manufacturers : 1. Deluxe backpack brush cutter.
2. Using Japan famous brand engine.
3. And made in Taiwan high quality attachments.
4. Professional class. 1. Engine: GX35/TH34/TL33/TL43/EH035/TH43/TH48/TL52.
2. Carbure type: diaphragm.
3. Start system: recoil start.
4. Clutch system: automatic centrifugal.
5. Transmission....
Select
The Spec Of Power Tool Manufacturers : Any specificaitons of various air stapler for staples, brad nails, pin or coiled nails we all can provide it to buyers. 1. Made of high quality stainless steel,iron...etc.
2. Special specifications can also be produced, according to customers' requirements. ....
Select
The Spec Of Power Tool Manufacturers : 1. Heavy duty cast aluminum pump head for maximum durability & longer service life.
2. Ergonomic handle design.
3. Bleeder valve for purging unwanted air.
4. Use standard 14oz grease cartridge.
5. 4-Jaw super grip coupler for better grip & extended service life, coupler includes ball check.
6. Non-slip finish for....