The Spec Of Hydraulic Pumps : 1. Series number: DS.
2. Output flow cc/rev): 12.
3. Mounting type: flance mounting type.
4. Shaft rotating(view from shaft end): clockwise. 1. Model: (1)DS-12 (2)DS-13 (3)DS-14 2. Operating characteristic at 1800r.p.m. and oil temperature 40°C (1)output flow(liter/min): a. 0kgf/cm²: 7.7, 12.6, 22.1 b.....
The Spec Of Hydraulic Pumps : 1. Quick output oil finished by two-section of high-low pressure, type of suction oil reach the most effective oil capacity.
2. single hole type of in-out oil controlled uit terminal, cable cut, punch, distributed/equipped electric tray and so on over fifty functions.
3. The pressure safe valve overloading protectiv....
The Spec Of Hydraulic Pumps : 1. Proportional electro-hydraulic load-sensing type.
2. Models: A16/A22/A37/A56. 1. Geometric displacement (cm3/rev; cu.in./rev):
(1) A16: 15.8 (.964).
(2) A22: 22.2 (1.355).
(3) A37: 36.9 (2.25).
(4) A56: 56.2 (3.43).
2. Please refer to attached specifications and information. ....
The Spec Of Hydraulic Pumps : 1. Fully remote controlled, allows the operator to advance, hold or retract at any time.
2. Cuts and crimps can be adjusted as necessary by stopping the advance or retract mode.
3. 3/4 HP heavy-duty motor.
4. Durable steel construction with built-in carrying handle.
5. Auto-cycle mode.
6. Low amperage rerequiremen....
The Spec Of Hydraulic Pumps : "Quality is life", which is a concept of ANSON HYDRAULICS. Due to all of ANSON employees purse the goad, we are developing high quality, high efficiency, long life and low sound levels intravane pumps. A wide variety of single and double configurations enables you to select the precise pump or combination bes....
The Spec Of Hydraulic Pumps : "VP" Series Variable Displacement Vane Pumps focuses on the required flow of hydraulic circuits. Therefore, the design is to improve the circiut efficiency, lower the noise and oil temperature to make the work effect and achieve the purpose of saving the power. Available for a grinding machine, an automatic l....
The Spec Of Hydraulic Pumps : 1. 50T series number
2. Output flow: 23 /min
3. Mounting type:
(1) F: flance mounting type
(2) L: foot mounting type
4. Shaft rotating(view from shaft end):
(1) R: clockwise
(2) L: counter-clockwise 1. Model: (1) 50T-07 (2) 50T-12 (3) 50T-17 (4) 0-50T-23 (5) 50T-26 (6) 50T-36 (7) 50T-39 (8) 150T-48 (9) 150....
The Spec Of Hydraulic Pumps : 1. Series number: GPY.
2. Output flow: 3.
3. Shaft rotating(view from shaft end): clockwise. 1. MODEL: (1)GPY-3 (2)GPY-4 (3)GPY-5.8 (4)GPY-7 (5)GPY-8 (6)GPY-9 (7)GPY-10 (8)GPY-11.5 2. Output flow cm³/rev: (1)2.98 (2)4.09 (3)5.77 (4)7.07 (5)8.01 (6)8.94 (7)10.06 (8)11.55 3. Rated pressure (MPa)kgf/cm²: ....
The Spec Of Hydraulic Pumps : 1. HVP series number.
2. Output flow: 30 /min.
3. Mounting type
(1) F: flance mounting type.
(2) L: foot mounting type.
4. Pressure adjusting range:
(1) A1: 15-70kg/cm².
(2) A2: 30-140kg/cm². 1. Model: (1) VP-30. (2) VP-40. 2. Output flow at3.5kg/cm² 1800r.p.m. /min: 30/40. 3. Max.operating pressure (....
The Spec Of Hydraulic Pumps : 1. VP series number.
2. Output flow: 30-30 /min.
3. Mounting type:
(1) F: flance mounting type.
(2) L: foot mounting type.
4. Pressure adjusting range:
(1) A1: 18-35kg/cm².
(2) A2: 30-70kg/cm². 1. Model: (1) VP-20-20. (2) VP-30-30. (3) VP-40-40. 2. Output flow at3.5kg/cm² 1800r.p.m. /min: 20/30/40. ....
The Spec Of Hydraulic Pumps : 1. VP series number.
2. Output flow: 12 /min.
3. Mounting type
(1) F: flance mounting type.
(2) L: foot mounting type.
4. Pressure adjusting range:
(1) A1: 18-35kg/cm².
(2) A2: 30-70kg/cm². 1. Model: (1) VP-30. (2) VP-40. 2. Output flow at3.5kg/cm² 1800r.p.m. /min: 30/40. 3. Max.operating pressure (kg....
The Spec Of Hydraulic Pumps : 1. Hydraulic fixed displacement vane pumps.
2. Output flow: 2.98 cm³/rev.
3. Rated pressure: 210 kgf/cm².
4. Intermittent MAX. pressure: 230 kgf/cm². 1. Speed: (1) Min: 700 r.p.m. (2) Max: 3000 r.p.m.. 2. Weight: 1.2 kg. ....
The Spec Of Hydraulic Pumps : "Quality is life", which is a concept of ANSON HYDRAULICS. Due to all of ANSON employees purse the goad, we are developing high quality, high efficiency, long life and low sound levels intravane pumps. A wide variety of single and double configurations enables you to select the precise pump or combination bes....
The Spec Of Hydraulic Pumps : "Quality is life", which is a concept of ANSON HYDRAULICS. Due to all of ANSON employees purse the goad, we are developing high quality, high efficiency, long life and low sound levels intravane pumps. A wide variety of single and double configurations enables you to select the precise pump or combination bes....
The Spec Of Hydraulic Pumps : "Quality is life", which is a concept of ANSON HYDRAULICS. Due to all of ANSON employees purse the goad, we are developing high quality, high efficiency, long life and low sound levels intravane pumps. A wide variety of single and double configurations enables you to select the precise pump or combination bes....
The Spec Of Hydraulic Pumps : "Quality is life", which is a concept of ANSON HYDRAULICS. Due to all of ANSON employees purse the goad, we are developing high quality, high efficiency, long life and low sound levels intravane pumps. A wide variety of single and double configurations enables you to select the precise pump or combination bes....
The Spec Of Hydraulic Pumps : "Quality is life", which is a concept of ANSON HYDRAULICS. Due to all of ANSON employees purse the goad, we are developing high quality, high efficiency, long life and low sound levels intravane pumps. A wide variety of single and double configurations enables you to select the precise pump or combination bes....
The Spec Of Hydraulic Pumps : 1. High efficiency operation with high pressure: under the conditions of pressure 140 bar, the VP5 pump is stable and highly efficient. Due to our improvement disgns "THREE POINT RING" support systems.
2. No vibration and quiet: the cam ring is specifically designed to have a special curve so the noise level....
The Spec Of Hydraulic Pumps : 1. High efficiency operation with high pressure: under the conditions of pressure 140 bar, the VP5 pump is stable and highly efficient. Due to our improvement disgns "THREE POINT RING" support systems.
2. No vibration and quiet: the cam ring is specifically designed to have a special curve so the noise level....
The Spec Of Hydraulic Pumps : 1.PVDF Series Pumps weight & Spped Limits.
2.PVDF Woodruff key & Splined Shafts.
3.PVDF Assembly -10 Woodruff key / 10S Splined Shafts. Please refer to the attached file for the specification details. ....
The Spec Of Hydraulic Pumps : This design is for single-hole-operative pump with high, low of two section quick oil output, even through under no electric, it is easy to operate. All the working pressure and function are the same as those power ones, pressure can be kept to stop. The inside of this pump is designed with safe high pressure of protec....
The Spec Of Hydraulic Pumps : This design is for single-hole-operative pump with high, low of two section quick oil output, even through under no electric, it is easy to operate. All the working pressure and function are the same as those power ones, pressure can be kept to stop. The inside of this pump is designed with safe high pressure of protec....
The Spec Of Hydraulic Pumps : 1. Quick output oil finished by two-section of high-low pressure, type of suction oil reach the most effective oil capacity.
2. single hole type of in-out oil controlled uit terminal, cable cut, punch, distributed/equipped electric tray and so on over fifty functions.
3. The pressure safe valve overloading protectiv....
The Spec Of Hydraulic Pumps : 1. As the general large ton and strike, for example: above 50 ton 120mm S.T oil returned is too slow cause to the spring lack of power, it must demand the oil speed, so use double-active type.
2. Both entering oil and returing oil for work pressure are 700kg/cm², thus it can bring out power of ton.
3. The function ....
The Spec Of Hydraulic Pumps : "HVP" Series Variable Displacement Vane Pumps focuses on the required flow of hydraulic circuits. Therefore, the design is to improve the circiut efficiency, lower the noise and oil temperature to make the work effect and achieve the purpose of saving the power. Available for a grinding machine, an automatic ....
The Spec Of Hydraulic Pumps : This design is for single-hole-operative pump with high, low of two section quick oil output, even through under no electric, it is easy to operate. All the working pressure and function are the same as those power ones, pressure can be kept to stop. The inside of this pump is designed with safe high pressure of protec....
The Spec Of Hydraulic Pumps : This design is for single-hole-operative pump with high, low of two section quick oil output, even through under no electric, it is easy to operate. All the working pressure and function are the same as those power ones, pressure can be kept to stop. The inside of this pump is designed with safe high pressure of protec....
The Spec Of Hydraulic Pumps : "PV2R" Series Single Vane Pumps
Operating Pressure Max. 210Bar
Shaft Speed Range Max. 1800RPM, Min. 950RPM Model No.: PV2R(1)-(2)-(3)(4)-10
(1):Model
1: 1TYPE
(2):Nominal Displacement
06: 6.1 cm3/rev
08: 8.0 cm3/rev
10: 10.1 cm3/rev
12: 12.2 cm3/rev
14: 13.7 cm3/....
The Spec Of Hydraulic Pumps : "DS" Series Single Vane Pumps. Model No.: DS-(1)-(2)R-10
(1):Displacement
11: 5 L/min@1800rpm@5Bar
12: 7.7 L/min@1800rpm@5Bar
13: 12.6 L/min@1800rpm@5Bar
14: 22.1 L/min@1800rpm@5Bar
(2):Mounting
L: Foot Mtg.
F: Flange Mtg. ....
