Select
The Spec Of Industrial Supplies Manufacturing : G.T. Internet Information Co., Ltd. was established in 1995 to provide manufacturers and suppliers with high tech integrated marketing solutions focusing upon optimum online market exposure and enhanced international order sources. Presently, G.T. owns high profile B2B trading platforms named China Trade Directory - th....
Select
The Spec Of Industrial Supplies Manufacturing : The full range from 1.5 t to 10t load capacity, with all kinds of the innovative functions accommodated, give agile and powerful performance for demanding jobs.
Select
The Spec Of Industrial Supplies Manufacturing : Submerge Rotary Table
100% Ocean Technologies Product, Turn & Burn Technologies
The state-of the art in house produced ocean Technologies Rotary Table can fully submerged in water. The isolation grade of IP68 Rotary Table employs motorized spindle that features outstanding accuracy performance.
The RT-115B ....
Select
The Spec Of Industrial Supplies Manufacturing : Application: architecture, interior design, decoration, kitchen ware. We can produce any sizes and styles as your requests, welcome OEM & ODM. ....
Select
The Spec Of Industrial Supplies Manufacturing : Short type Rotary Hydraulic Cylinder with Safety Device:
1.For short form, light weight and high speed rotary cylinder.
2.Built-in safety check valves and pressure relief valves.
3.Can screw it from the rear end of the cylinder when mounting.
4.The drain port should be independently connected to oil tank to avoid b....
Select
The Spec Of Industrial Supplies Manufacturing : •Auto-flush with TDS display.
•Removes heavy metals, pesticides, bacteria, viruses, small particulate…etc.
•CE certificated, quiet, power saving booster pump. Long life and high production.
•Strategically located tubing protects from damage and contamination.
•Suitable for both wall-mounted and under-c....
Select
The Spec Of Industrial Supplies Manufacturing : 1. Compact, low inertla, light weight cylinder :
Manufuctured by aluminium alloy, this cylinder is light weight design to reduce the loading of spindle.
2. High speed :
This balanced design cylinder is light weight, compact and maintains outstanding stability during high speed operation.
3. Long life :
High qualit....
Select
The Spec Of Industrial Supplies Manufacturing : ●Center Frequency range: 42 ~ 1500MHz
●Bandwidth range: 5 ~ 120MHz
●Impedance: 50ohm & 75ohm
●Attenuation value: 10dB upgrated by each pole adding
Select
The Spec Of Industrial Supplies Manufacturing : 1. Product Name: Trigger Sprayer.
2. Item No:T-650. Cap Size: 24/410Outflow per stroke: 0.65cc±0.05ccFunction: Spray & Offpackage for export: 500pcs/ctn 52*37*45cmpackage for domestic: 500pcs/ctn 52*37*45cm ....
Select
The Spec Of Industrial Supplies Manufacturing : The new ASD plastic squeeze dryer is especially suitable for soft plastics dewatering and drying, such as films and woven bags. It can be equipped with plastic film washing lines or alone. Compared with the traditional way of centrifugal dryer and pipeline dryer, the new ADS plastic squeezer with advantages of small fo....
Select
The Spec Of Industrial Supplies Manufacturing : Rubber part:
Compression, transfer, and injection molding, extruding, and other fabricating services. Fully automatic machinery equipped for making high volume parts. Various materials and hardness for all kinds of application, NR, SBR, ACM, EPDM, NBR and so on, depending on customer’s requirement. ....
Select
The Spec Of Industrial Supplies Manufacturing : 1. Free neck.
2. 120 ribbed grills with decorated rim.
3. 3 new design transparent blades (AS material) or 3 narrow blades (ABS material).
4. Oscillation (swing) is operated by.
5. Remote control.
6. Micro-switch & remote control.
(1) Variety wind mode selected.
(2) General wind, natural wind, slumberous.
(....
Select
The Spec Of Industrial Supplies Manufacturing : 1. Thermal grease
Properties:
Low thermal resistance, high reliability and stability, easy operation, non-dry out, nonelectric, pump out resistant, RoHS certificated……
Product Applications:
CPU, MOS, LED, microprocessor, heat sink, graphic card, power, relay……
Select
The Spec Of Industrial Supplies Manufacturing : Plastic injection molding, overmolding, two shot injection molding, in mold decoration. With strong engineering and R&D capabilities, we have successfully developed unique twin and double injection molding processes utilizing rotating tooling. Since 1989, we have produced many varieties of 2-color key caps for HP,....
Select
The Spec Of Industrial Supplies Manufacturing : 1. Hardware components.
2. Material: steel. 1. Finish: nickel, zinc.2. Please refer to an attachment. ....
Select
The Spec Of Industrial Supplies Manufacturing : Applications:
1. Commercial food industry, clamp-on heating, static and forced air applications, pre-weld heat treating, salt baths, and molten metal applications.
2. Used to convert from gas or oil fired burners.
3. Used for drying products or parts.
4. For industrial water boilers, hot water storage tanks, an....
Select
The Spec Of Industrial Supplies Manufacturing : 1. Plain flexible magnet sheeting for mounting and lamination of any media.
2. Available in rolls or customized sheet sizes, with thickness regularly from 0.012" to 0.060".
Select
The Spec Of Industrial Supplies Manufacturing : *Horizontal Use (Square plate)
*High Speed, 90-degree division time less than 1 second.
*No backlash.
*Can be used with any controller and specialized for processing indexing manufacture.
*High repeatability.
*Can match the Circular faceplate, to be a ROTARY INDEXING SPM.
*Can match the Square faceplate, to be a ....
Select
The Spec Of Industrial Supplies Manufacturing : Main extruder:
*Motor: 100 HP Siemens motor.
*Gear box: 1 set.
*Screw diameter: Ø80/ Ø156mm.
*Barrel temperature control: 5 zones.
*Gear pump: 1 set. T-Die width: 1050 mm.Finished product width: 860 mm.Finished product thickness: 1~1.25mm.Corrugated forming unit: 1 set.Temperature controller: 3 sets.Edge-tr....
Select
The Spec Of Industrial Supplies Manufacturing : 1. Nominal output torque: 10 Nm~1180Nm.
2. Speed ratio:
(1) Single stage ratio: 3, 4, 5, 6, 7, 8, 9, 10.
(2) Double stage ratio: 12, 15, 16, 20, 25, 28, 30, 35, 40, 50, 60, 70, 80, 90, 100.
(3) Triple stage ratio: 120, 150, 200, 250, 300, 400, 500, 600, 700, 900, 1000.
3. Low backlash:
(1) Single stage ratio: pre....
Select
The Spec Of Industrial Supplies Manufacturing : The PU-MF900 heat staking machine is specially designed for plastic shells or plastic staking tips, or processed products that require beautiful appearance and very high requirements after processing. It is widely used in hardware shrapnel, microelectronic products, plastic hardware of electric vehicles, automobile doo....
Select
The Spec Of Industrial Supplies Manufacturing : Plug type:
North America, Europe, Japan, UK, Australia, South Africa
Select
The Spec Of Industrial Supplies Manufacturing : 1. Digital type with large LCD, easy to read.
2. With zero setting installation, can be makes comparing mensuration.
3. Metric/inch interchange switch, convenient to use both of metric & inch size.
4. A PC box included. 1. Measuring range: 150/200/300mm. 2. Minimum reading: 0.01mm. 3. Tolerance: +-0.03mm. 4.....
Select
The Spec Of Industrial Supplies Manufacturing : 5/2 way mini mechanical valves: aluminum body provides high quality and durability. Various operating methods are suitable for different working environments. 1. Model: MSV30132-01, MSV40152-01. 2. Body material: aluminum alloy. 3. Port size: 1/8" PS or NPT. 4. Panel bore size: 12mm. 5. Fluid: compressed air (....
Select
The Spec Of Industrial Supplies Manufacturing : High quality and precision valve stem seals for DAIHATSU.
1. 90048-12005: engine model-AB, AD, CB, CL.
2. 90048-12009: engine model-EB, EF, EF-CS/ CL/ KL/ NS/ TS/ VS.
3. 90048-12011: engine model-HB, HC, HC-C/ E/ F, HD. We accept order of OEM and ODM, welcome customers’ drawing and samples for cooperation ....
Select
The Spec Of Industrial Supplies Manufacturing : 1. Rubber parts, o ring, gasket, auto parts, motorcycle parts.
2. Innovative and excellent qualities.
3. Professional vehicle and mechanical oil seals.
4. Meet clients' needs, bringing them great advantages in market competition.
Select
The Spec Of Industrial Supplies Manufacturing : Silicon mat for surgical usage provides a convenient, effective, and economic way to protect your expensive surgical instruments during the sterilization process. These trays are made of FDA-grade silicone making them suitable for autoclaving or gas sterilization of surgical instruments. We have experience in developin....
Select
The Spec Of Industrial Supplies Manufacturing : This Chuck should be use with fixture plate. The chuck size has 3", 4", 5", and 6" For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e ....
Select
The Spec Of Industrial Supplies Manufacturing : Mountop Precision provides customers with heat-treatment finishing work, specializing in heat-treatment of high-speed steel and steel molds. In response to customer demand, Mountop Precision began the research and development of our own products, establishing a tool manufacturing plant producing cold-and hot-pressing p....
Select
The Spec Of Industrial Supplies Manufacturing : ●Internal surfaces in contact with the material are made of stainless steel.
●The cover is equipped with safety device; motor will stop immediately when cover is opened.