Select
Taiwan plant:
(1) Thermoplastic Polyurethane, PU casting Prepolymer & Moca.
(2) TPU adhesive for shoes.
China plant:
(1) PU pneumatic tubing & pressure hose.
(2) PU transmission belt, round, V-belts.
(3) PU wheels, rod, sheet, film, seals& O-ring & parts. 1. Shore hardness: A/D 93A.
2. 100% Modulus, ps....
Select
1. PP sheets is excellent in light gravity, stability, heat-resistance, oil-resistance, shock-resistance and cold-resistance.
2. Use: applied in general vacuum forming, hollow molding forming and lamination processing. 1. Thickness: 0.25m/m~1.20m/m.
2. Width: 50cm~70cm.
3. Grain: matte / glossy.
4. Color: natu....
Select
1. You can choose the appropriate style or pattern you need, or cooperate with the company to develop products of novel styles.
2. Offering stable quality, complete patterns.
3. Manufacturing the excellent plastic products that conform to the clients’demands. 1. Size: 6".
2. Material: PVC. ....
Select
Characteristics polypropylene corrugated sheet is produced by melted PP and hot pressed. There are upper wall and lower wall, and partition in between. It resists compression, and is impact-proof, water/grease-proof, and heat resistant. It applies multi-color, weighs light but born heavy. PP is hydrocarbon, there’s n....
Select
1. GPPS sheet material: polystyrene.
2. Transparent, light, acid-proof and water-tolerant.
3. Application for photo frames, indoor use and so on. 1. Thickness: 1.2mm~5.0mm
2. Color clear. ....
Select
1. PC sheets with good rigidity, abrading-resistance, high shock-resistance and high temperature resistance and machinability in high transparent.
2. Function: applied in general vacuum forming, hollow molding forming and engineering plastic. 1. Thickness: 0.80m/m ~ 5.00m/m.
2. Width: 50cm~70cm.
3. Grain: glossy....
Select
1. PET sheets is a non-crystal thermoplastic, burned completely without any peculiar odour, belonging to recycling environmental protection material.
2. Thin sheets characteristic: applicable for general vacuum forming, hallow molding forming, printing, lamination, plating, adhesive by handwork.
3. Thick sheets cha....
Select
1. PLA is a lactic acid fermented from cornstarch polymerizing to be polylactic acid.
2. PLA is approved by America FDA, and that is recycled, decomposing, stock-manuring and incinerating.
3. Not add plastic, that can decompose to be carbon dioxide. and water in stock manure situation after using and disuse, and bec....
Select
1. HIPS pressed out from polystyrene, product is translucency, with high shock-resistance strength, and excellent chromaticity and machinability.
2. HIPS is presently used in board materials and sheet materials in large quantity, mainly utilizing its excellent ductibility, vacuum molding, low moisture absorption and e....
Select
There are three parts of polypropylene corrugated sheet: upper wall, partition and lower wall. The traditional production cannot use different material for the three parts. After improvement, the new technology can divide the sheet into three parts, using different material or additives, thus, produce A-B-A or A-B-C sh....
Select
1. Character: transparent, bright color, coriaceous and chemical-resistant, with good capability in molding, machinability,
printing, plating, lamination and stability.
2 Application: applied in stationery adornment, and commodities' packaging material, building material for decoration, cooling water tower, filling....