The Spec Of Gate Valves : 200 W.O.G
1. The thread ends conform to ASME B1.20.1(NPT)
(1) DIN 2999 & BS 21
(2) ISO 228/1 & ISO 7/1
2. 200 W.O.G.
3. Max working temperature 445℉.
4. Non-rising stem.
The Spec Of Gate Valves : Design description:
(1) Outside screw and yoke.
(2) Bolted bonnet (pressure seal bonnet for 1500 lbs).
(3) Flexible wedge, fully guided.
(4) Renewable seat rings.
(5) Rising stem and non-rising handwheel.
(6) Available with gear operator.
(7) Available with actuator.
(8) Available with by-pass valve.
The Spec Of Gate Valves : A. Origin: Taiwan.
B. Brand: catamaron.
C. Product description:
1. Threaded end, reduced bore, 1-pc, ball valve 1000wog, SS316/DIN
1.4408.
2. Threaded end, full bore, 2-pcs, ball valve, 1000wog, SS316/DIN 1.4408.
3. Threaded end, full bore, 3-pcs, ball valve, 1000wog, SS316/DIN 1.4408.
4. Socket-weld end, ful....
The Spec Of Gate Valves : Brass hydrant gate valve with teflon seat for fire fighting equipments.
The Spec Of Gate Valves : Our firm Gillson is a professional fitting manufacturer in Taiwan. We are not only offer you fitting but also with various valve assembling service from our factory. Our sample is available upon your request.
The Spec Of Gate Valves : 1. Investment casting.
2. Screwed-in bonnet.
3. Non-rising stem.
4. Solid wedge disc.
5. Hand wheel operation.
The Spec Of Gate Valves : Ansi flanged gate valve class 150 & 300:
1. Flange: ansi b16.5 class 150 & 300, face to face: ansi b 16.10.
2. Material CF8M (SS 316), CF8(SS 304), WCB(cast steel).
The Spec Of Gate Valves : 1. St.st.316 gate valve class 600.
2. Screwed end to BS21, ANSI B2.1, DIN-259.
The Spec Of Gate Valves : 1. High quality investment casting body / bonnet.
2. Pressure temperature rating: 200 PSI(PN 16) / 350 deg. F.
3. Inside screw and screwed bonnet, Wedge Disc, integral seat.
4. Non-Rising stem and hand wheel.
5. 100% tested air-under water at 100 PSI (6 Bars).
The Spec Of Gate Valves : Since our establishment, we have built technological cooperation with Japan, with products ranging from dual plate & single door wafer type check valve, butterfly valve, globe valve, gate valve, ball valve, swing check valve, swing check, Y-Strainer, as well as specialiized design and manufacturing of all kinds of valv....
The Spec Of Gate Valves : Bueno ball valves are durable,requires minimal maintenance, and have been tried and tested in harsh operating environments in different industries for many years. They are ideal for industrial users who are seeking cost effective solution, but do not wish to compromise in quality.
The Spec Of Gate Valves : 1. End connections: threaded.
2. Seat materials: PTFE.
The Spec Of Gate Valves : 1. American type female stop valve (WCB, CF8, CF8M).
2. Gate valve body: stainless steel, and be used with cryo-pumps, turbo molecular pumps or in any applications requiring clean, high life cycle, low maintenance.
The Spec Of Gate Valves : 1. Use b61 casting copper alloy suitable for steam engine boiler.
2. Union type assembly effects an easier repair and parts replacement.
The Spec Of Gate Valves : 1. Pressure temperature rating: 200PSI (PN16)/350deg. F.
2. Non rising stem and hand wheel.
3. 100% tested air-under water at 100 PSI (6 Bars).
4. Stainless steel gate valves (AISI 316 ).
The Spec Of Gate Valves : Gate valve 200PSI, screwed end, steel material.
The Spec Of Gate Valves : Investment casting flanged ends gate valve, globe valve, swing check valve, y-strainer, piston check valve, disc check valve.
The Spec Of Gate Valves : 1. Gate valves .
2. Material: stainless steel.
3. Hand wheel: cast iron.
4. Size: 1/2" ~ 2".
5. Rating: 150LB.
The Spec Of Gate Valves : Since our establishment, we have built technological cooperation with Japan, with products ranging from dual plate & single door wafer type check valve, butterfly valve, globe valve, gate valve, ball valve, swing check valve, swing check, Y-Strainer, as well as specialiized design and manufacturing of all kinds of valv....
The Spec Of Gate Valves : Since our establishment, we have built technological cooperation with Japan, with products ranging from dual plate & single door wafer type check valve, butterfly valve, globe valve, gate valve, ball valve, swing check valve, swing check, Y-Strainer, as well as specialiized design and manufacturing of all kinds of valv....
The Spec Of Gate Valves : 1. End connections: threaded.
2. Seat materials: PTFE.
The Spec Of Gate Valves : Design description:
1. API 603 design for 150 LBS & 300 LBS.
2. API 600 design for 600 – 1500 LBS.
3. Outside screw and yoke.
4. Bolted bonnet (pressure seal bonnet for 1500lbs).
5. Flexible wedge, fully guided.
6. Integral seat and back seat for 150 LBS & 300 LBS.
7. Rising stem and non-rising handwheel.
....
The Spec Of Gate Valves : Design description:
1. API 602 design.
2. Outside screw and yoke.
3. Bolted bonnet (pressure seal bonnet for 1500LBS & over).
4. Renewable seat rings.
5. Rising stem and non-rising handwheel.
The Spec Of Gate Valves : ANSI 150 / 300 / 600
1. The flange ends conform to ASME B 16.5.
(1) Face to Face: ANSI B 16.10.
(2) Wall thickness: ANSI B 16.34.
2. Investment casting 2".
3. Sand cast 3" & larger.
4. Graphoil packing for long valve life and high temperature applications.
5. Raised stem.
The Spec Of Gate Valves : 1. The thread ends conform to ASME B1.20.1(NPT) DIN 2999 & BS 21 ISO 228/1 & ISO 7/1.
2. 200 W.O.G.
3. Max working temperature 445 F.
4. Non-rising stem.
The Spec Of Gate Valves : 1. The flange ends conform to ASME B16.5.
2. Face to Face: ANSI B 16.10.
3. Wall thickness: ANSI B 16.34.
4. Investment casting 2".
5. Sand cast 3" & larger.
6. Graphoil packing for long valve life and high temperature applications.
7. Raised stem.
The Spec Of Gate Valves : 1. St.st.304/316 gate valve JIS 10K.
2. Outside screwed and yoke.
The Spec Of Gate Valves : 1. Cast iron gate valve class 125.
2. Non-rising stem.(N.R.S.)
The Spec Of Gate Valves : Cast iron knife gate valve.
