The Spec Of High Pressure Ball Valves : 1. Bottom-loaded blow-out proof stem.
2. Belleville washer assures leak-free seal on cool-down and as packing wears.
3. Basic design complied with ANSI B16.34&EN 12516-1.
4. NPT threaded ends complied with ANSI B 1.20.1…
5. Rc, Rp & G threaded ends complied with BS 21/2779, JIS B-0203/0202, Din 259/2999, ISO 228-....
The Spec Of High Pressure Ball Valves : 1. Investment casting body and cap.
2. Working pressure 1/4"~1/2" 1000 PSI.
3. Pure teflon seals and seats.
4. Blow-out proof stem.
5. 100% leakage tested at 100 PSI air under water. 1. Material: SS316, CF8M (1.4408), SS304, CF8 (1.4401), WCB.
2. Size: 1/4" reduce bore (ANSI 3000 PSI). ....
The Spec Of High Pressure Ball Valves : Two way Threaded end High Pressure Ball Valves -
Sizes range: 1/8”~ 1" (DN 6 ~ DN 25)
Port availability: Reduce bore
Temperature range: -20°C to 160°C
Max. Working pressure: 6000psi
End types: Threaded
F316 or F304 Stainless Steel Body
Blow-out-proof stem design MATERIAL LIST-
1. BODY: ASTM A18....
The Spec Of High Pressure Ball Valves : Bueno ball valves are durable, requires minimal maintenance, and have been tried and tested in harsh operating environments in different industries for many years. They are ideal for industrial users who are seeking cost effective solution, but do not wish to compromise in quality. 1. Dimensions: 1/4"~2-1/2&qu....
The Spec Of High Pressure Ball Valves : 2-PC DIRECT MOUNT BALL VALVE-
1. Each integrated ISO-5211 Mounting Pad
2. Square Stem can be with direct Mount without Bracket/Adaptor.
3. Stem is with Blow-out Proof design as well as Anti-Static device.
4. Viton O-Ring on Stem gives extra support and assurance of tightness.
5. Stem seal is with 45 angle against ....
The Spec Of High Pressure Ball Valves : 1. Strengthened barstock construction secures 2000 psi working pressure rating. Reinforced TFE seats increase durability.
2. NACE trim complied with NACE MR-01-75.
3. Separating packing nut and handle nut secure NO STEM LEAKGE even when handle is removed.
4. Bottom-loaded blow-out proof stem.
5. Basic design compli....
The Spec Of High Pressure Ball Valves : 1. Strengthened barstock construction secures 2000 psi working pressure rating. Reinforced TFE seats increase durability.
2. NACE trim complied with NACE MR-01-75.
3. Separating packing nut and handle nut secure NO STEM LEAKGE even when handle is removed.
4. Bottom-loaded blow-out proof stem.
5. Basic design compli....
The Spec Of High Pressure Ball Valves : 1. Adjustable packing gland.
2. Bottom-loaded blow-out proof stem.
3. Basic design complied with ANSI B16.34 & EN 12516-1.
4. NPT threaded ends complied with ANSI B 1.20.1..
5. Rc, Rp & G threaded ends complied with BS 21/2779, JIS B-0203/0202, DIN 259/2999, ISO 228-1, AS1722.1/1722.2 are upon request.
6. Tested a....
The Spec Of High Pressure Ball Valves : 1. Strengthended construction secures 2000 psi working pressure rating. Reinforced TFE seats
increase durability.
2. Adjustable packing gland.
3. Bottom-loaded blow-out proof stem.
4. Basic design complied with ANSI B16.34 & EN 12516-1.
5. NPT threaded ends complied with ANSI B 1.20.1..
6. Rc, Rp & G threaded en....
The Spec Of High Pressure Ball Valves : 1. Strengthened construction secures 6000 psi working pressure rating. Enlarged bottom-loaded blow-out proof stem.
2. Gasket is placed ahead of the body cap threads, providing a tight seal and protection of threads from flow media.
3. Vented ball equalizes pressure between the body cavity and the flow steam to preven....
The Spec Of High Pressure Ball Valves : 1. Three-piece design for fast, economical in-line maintenance.
2. Adjustable packing gland. Bottom-loaded blow-out proof stem.
3. Basic design complied with ANSI B16.34 & EN 12516-1.
4. NPT threaded ends complied with ANSI B 1.20.1..
5. Rc, Rp & G threaded ends complied with BS 21/2779, JIS B-0203/0202, DIN 259/29....
The Spec Of High Pressure Ball Valves : 1. Three-piece design for fast, economical in-line maintenance.
2. Adjustable packing gland. Bottom-loaded blow-out proof stem.
3. Mounting pad complied with ISO 5211 for ease and interchangeability of actuation. Low operating torque to reduce automation costs.
4. Basic design complied with ANSI B16.34 & EN 12516-1.....
The Spec Of High Pressure Ball Valves : 1. Three-piece design for fast, economical in-line maintenance.
2. Strengthened construction secures 2000 psi working pressure rating.
3. Reinforced TFe seats increase durability.
4. Adjustable packing gland.
5. Bottom-loaded blow-out proof stem.
6. Low operating torque to reduce automation costs.
7. Mounting pad....
The Spec Of High Pressure Ball Valves : 1. Full port design to avoid pressure drop.
2. Adjustable packing gland. Bottom-loaded blow-out proof stem.
3. Low operating torque to reduce automation costs.
4. Mounting pad complied with ISO 5211 for ease and interchangeability of actuation.
5. Basic design complied with ANSI B16.34 & EN 12516-1.
6. NPT threade....
The Spec Of High Pressure Ball Valves : 1. Standard port design to gain cost-savings.
2. Adjustable packing gland. Bottom-loaded blow-out proof stem.
3. Low operating torque to reduce automation costs.
4. Mounting pad complied with ISO 5211 for ease and interchangeability of actuation.
5. Basic design complied with ANSI B16.34 & EN12516-1.
6. NPT thread....
The Spec Of High Pressure Ball Valves : 1. Uni-body design with wafer type flanged ends for fast installation, in-line maintenance and rebuilding. Soild ball construction provides structural integrity and mainimizes flow turbulence.
2. Body joint is designed to prevent excessive compression of valve internals, resulting in a consistent and low operating tor....
The Spec Of High Pressure Ball Valves : 1. Split body design with flanged ends for fast installation, in-line maintenace and rebuilding. Soild ball construction provides structrual integrity and mainimizes flow turbulence.
2. Body joint is designed to prevent excessive compression of valve internals, resulting in a consistent and low operating torque.
3. M....
The Spec Of High Pressure Ball Valves : 1. Split body design with flanged ends for fast installation, in-line maintenace and rebuilding. Soild ball construction provides structrual integrity and mainimizes flow turbulence.
2. Body joint is designed to prevent excessive compression of valve internals, resulting in a consistent and low operating torque.
3. M....
The Spec Of High Pressure Ball Valves : 1. Split body design with flanged ends for fast installation, in-line maintenace and rebuilding. Soild ball construction provides structrual integrity and mainimizes flow turbulence.
2. Body joint is designed to prevent excessive compression of valve internals, resulting in a consistent and low operating torque.
3. M....
The Spec Of High Pressure Ball Valves : 1. Split body design with flanged ends for fast installation, in-line maintenace and rebuilding. Soild ball construction provides structrual integrity and mainimizes flow turbulence.
2. Body joint is designed to prevent excessive compression of valve internals, resulting in a consistent and low operating torque.
3. B....
The Spec Of High Pressure Ball Valves : 1. Split body design with flanged ends for fast installation, in-line maintenace and rebuilding. Soild ball construction provides structrual integrity and mainimizes flow turbulence.
2. Body joint is designed to prevent excessive compression of valve internals, resulting in a consistent and low operating torque.
3. B....
The Spec Of High Pressure Ball Valves : 1. Three-piece design with flanged ends for fast installaion, in-line maintenance and rebuilding.
2. Adjustable packing glands. Bottom-loaded blow-out proof stem.
3. Investment cast body & cap.
4. Basic design complied with ANSI B 16.34, DIN 3339, DIN 3357, DIN 3357-2, & EN 12516-1.
5. Flanged ends complied with DI....
The Spec Of High Pressure Ball Valves : 1. Three-piece design with flanged ends for fast installaion, in-line maintenance and rebuilding.
2. Adjustable packing glands. Bottom-loaded blow-out proof stem.
3. Investment cast body & cap.
4. Basic design complied with ANSI B 16.34, DIN 3339, DIN 3357, DIN 3357-2, & EN 12516-1.
5. Flanged ends complied with DI....
The Spec Of High Pressure Ball Valves : 1. Full port design to avoid pressure drop.
2. Adjustable packing gland. Bottom-loaded blow-out proof stem.
3. Low operating torque to reduce automation costs.
4. Mounting pad complied with ISO 5211 for ease and interchangeability of actuation.
5. Basic design complied with ANSI B16.34 & EN 12516-1.
6. NPT threade....
