The Spec Of Pipe Fittings : Serving you in the following categories:
1. Teflon industrial coating: our two factories are all Dupont LIA ( Licensee Industrial Application ) and ISO 9001 certificated.
2. Halar coating for stainless steel ducts for semiconductor industry: FM 4922 approved.
3. Conveyorized oven coating: using various paints co....
The Spec Of Pipe Fittings : Material:
1. Stainless steel.
(1) All in SS#400 or #300.
(2) Housing & band: SS #400 or SS#300, screw: steel.
(3) Band: #410 SS, housing and screw: steel.
2. All in galvanized steel. Band width: 8.0m / M-HF-2101, 9.0m / M: HF-2907, 12.7mm / HF-2202(T:0.6mm) / HF-2203 (T:0.6mm). ....
The Spec Of Pipe Fittings : Union No. Size
C-050 1/4"
C-051 5/16"
C-052 3/8"
C-053 1/2"
C-054-1 5/8"
C-054 3/4" ....
The Spec Of Pipe Fittings : Product name: PU ( polyurethane) pneumatic tubes:
1. No.: Pu-0425
(1) O.D (mm): Ø4.
(2) I.D (mm): Ø2.5.
(3) Burst-pressure: 24kg/cm².
(4) Length (m/roll): 200.
2. No.: Pu-0530
(1) O.D (mm): Ø5.
(2) I.D (mm): Ø3.
(3) Burst-pressure: 24kg/cm².
(4) Length (m/roll): 200.
3. No.: Pu-0640
(1) O.D (mm): Ø6.....
The Spec Of Pipe Fittings : 1. Y-type strainer.
2. Investment casting.
3. SS 316 screen.
4. Screwed-in cap.
5. Working pressure: 800 PSI.
6. End connection: female threaded ends. 1. Available size: 1/4"--- 3" (DN8---DN80). 2. Available material: ASTM A351 CF8M. ....
The Spec Of Pipe Fittings : Stainless steel forged flange-slip-on. JIS STD 5K~20K. 1/2"~24" ....
The Spec Of Pipe Fittings : Honing seamless steel pipes produced by undergo cold forcing and annealing for a cured tensile strength reaching over 52kg/cm2, before the pipes are milled by precision machinery, regulation the tolerance in inner diameter at an H8-H9 level, with surface roughness at between Ra 0.2 μm~0.8μm, which helps to extend the....
The Spec Of Pipe Fittings : 1. Thread end: BS21, ANSI B2.1 or DIN 259.
2. Special order: for size 3/8” and socket weld end acc. to ANSI B16.1. Specifications:
1. Working pressure: ANSI 4.5~600LBS, DIN PN 3~40, JIS 40KG/CM2.
2. Test pressure: body: 1160 PSI., PN80., 80 kg/cm2 (cold hydrostatic).
3. Working temperature: max allowable 250....
The Spec Of Pipe Fittings : Our firm Gillson is a professional fitting manufacturer in Taiwan. We are not only offer you fitting but also with various valve assembling service from our factory. Sample is available upon your request. Swing check valve threaded end.
1. Investment casting body.
2. Pressure rating: 200 PSI.
3. Material: CF8M (....
The Spec Of Pipe Fittings : Tubes: material: 6061 or 7005.
Diverse types of tubes, innovative and smart, developed for market or subject to customer's design. OEM orders are welcome. ....
The Spec Of Pipe Fittings : Since our establishment, we have built technological cooperation with Japan, with products ranging from dual plate & single door wafer type check valve, butterfly valve, globe valve, gate valve, ball valve, swing check valve, swing check, Y-Strainer, as well as specialiized design and manufacturing of all kinds of valv....
The Spec Of Pipe Fittings : 1. WYE is applied to typical applications including industrial construction system, pure water system, sewerage and waste piping system, and drainage system of general use.
2. KDJ products are suitable for acid-resistant and alkali-resistant industry construction system, pure water system, and drainage system of gener....
The Spec Of Pipe Fittings : 1. Quick fitting, auto shut off valve.
2. Z-SV-Q0404W: 1/4" tube O.D. We accept OEM or ODM job. ....
The Spec Of Pipe Fittings : 1. Product name: welding pipe fittings .
2. These pipe fittings are extensively used for countless purpose in varied industries.
3. Our welded pipe fittings are also available in various shapes and sizes in accordance with customer specifications. 1. Type: elbow 90 degree L/R & S/R, elbow 45 degree L/R, equal tee,....
The Spec Of Pipe Fittings : We are able to deliver much tighter tolerance with cionstants deviation range per tube,per lot and between different shipmnnts. 1. Alloy and application:
(1) Material: copper.
(2) Standard JIS, ASTM, EN.: C1220, C122200, Cu-DHP.
(3) Nominal chemical( C8>99.85): P: 0.013-0.05.
(4) Typical application: solder fil....
The Spec Of Pipe Fittings : (1).Double containment pipe and visible pipe systems used by electronic industries;
(2).Industrial acid-resistant systems and water processing systems;
(3).Water, air conditioning, agricultural irrigation, and drainage systems used by general industries. We can produce any sizes and styles as your requests, wel....
The Spec Of Pipe Fittings : Any products are wrapped in our company’s standard packing or wrapped according to client’s order before shipping to prevent from any damage. Please refer to the attached file for the specification details. ....
The Spec Of Pipe Fittings : Compact (wafer) type flanged ball valve:
1. 150 LBS, PN 16, PN 40, full bore.
2. Flange dimensions: DIN 2633-PN16. DIN 2635-PN40. ANSI 150 LBS.
3. Material:
(1) Astm a351-cf8m (din 1.4408) stainless steel.
(2) Astm a216-wcb(din 1.0619) carbon steel. 1. High quality investment casting body and caps.
2. Pr....
The Spec Of Pipe Fittings : 1. Product name: adapters.
2. Brass fitting. 1. No. 65160 1/2" F x 5/8" F. 2. No. 65109 5/8" F x 5/8" O. 3. No. 65158 5/8" F x 1/2" F. 4. No. 65108 1/2" F x 1/2" O. 5. No. 65156 3/8" F x 1/2" F. 6. No. 65107 3/8" F x 3/8" O. 7. No. 65154 5/16" O x 3/....
The Spec Of Pipe Fittings : 1. Material is copper.
2. Formed with 3 simultaneous planes to resist distortion. Inside radius will be maintained even when bent into a small arc, keeping the flow rate at maximum. Custom-made. ....
The Spec Of Pipe Fittings : We are specialized in marine equipments and steel-related products. 1. Material: any material.
2. Standards: JIS, ASTM, GB.
3. All specifications are available by your demands. Please contact us for quick inquiry. ....
The Spec Of Pipe Fittings : HEAVY DUTY REINFORCED HOSE
HARDNESS: SHORE 80A~90A
WORKING TEMPERATURE -20。C~70。C
FLUID:AIR
COLORS: CLEAR, YELLOW, BLUE, RED,ORANGE Please refer to the attached file. ....
The Spec Of Pipe Fittings : Cast Steel Y Strainer, Flanged/BW End 1. materials: WCB/CF8/CF8M/CF3M
2. Size: 2”~12”
3. Rating: JIS10K,20K
ANSI Class 150,300
DIN PN10,PN16 ....
The Spec Of Pipe Fittings : Stainless steel butt weld pipe fittings , seamed & seamless. 1. 90 elbow: 1/2" to 48".
2. 45 elbow: 1/2" to 48".
3. Tee: 1/2" to 48".
4. Reducers: 1/2" to 48".
5. Stub-ends: 1/2" to 36". ....
The Spec Of Pipe Fittings : Application of Stainless Steel Pipe-
Use in chemical & petrochemical, construction for building, ornamental tubing etc. Grade: 304/304L/316/316L
Standard: ASTM A312 A358 A778 ASME B36.19M ....
The Spec Of Pipe Fittings : 1. Working pressure: 0-150 PSI.
2. Working temperature: 0-160℃.
3. Testing pressure: body: 25 BAR, seat: 20 BAR. 1. Size : 1/2" to 3".
2. Material : PVC.
3. Socket end : CNS, JIS, BS, ANSI, DIN.
4. Thread end : NPT, BSPT. ....
The Spec Of Pipe Fittings : Taiwan plant：
(1) Thermoplastic Polyurethane, PU casting Prepolymer & Moca.
(2) TPU adhesive for shoes.
China plant：
(1) PU pneumatic tubing & pressure hose.
(2) PU transmission belt, round, V-belts.
(3) PU wheels, rod, sheet, film, seals& O-ring & parts. 1. Shore hardness: A/D 93A.
2. 100% Modulus, ps....
The Spec Of Pipe Fittings : Design description:
(1) Y-pattern.
(2) Bolted cover with drain plug.
(3) Perforated stainless steel screen.
(4) Available with 40 - 200 mesh screen. 1. Materials:
(1) A216-WCB.
(2) A217-WC6.
(3) A352-LCB.
2. Ends:
(1) Flanged ends.
(2) Buttwelding ends.
3. Ratings:
(1) ANSI 150 and 300 LBS.
(2) JIS....
The Spec Of Pipe Fittings : Quick release with double check valve. 1. O.E.M. REF.: BEN 289714.
2. DEL. A.NPT.: 1/4". ....
The Spec Of Pipe Fittings : Fittings, Pipe Fittings , connectors.
All kinds of Pneumatic fittings, tubing joints, communication connectors and optoelectronic products connectors. All kinds of Pneumatic fittings, tubing joints, communication connectors and optoelectronic products connectors.*Processing capacity:the Ø 2mm- Ø 200mm....
