The Spec Of Fire Fighting Equipment : 1. Fire department connection, 90 degree angle.
2. Wide applications, easy operation, safety, interchangeability.
The Spec Of Fire Fighting Equipment : 1. The best service and product quality.
2. Specialized fire equipment manufacturers, hydrant box, integrated fire hydrant box, the emergency power hydrant box, and outside the box to fire hydrants, fire hydrant indoor boxes, fire hose boxes, switch boxes, fire equipment, iron materials sale, the sale of electrical ma....
The Spec Of Fire Fighting Equipment : 1. Sensitive to the temperature of 68, 72, 93, and 141 C.
2. Dispersable range: 80l /min - 1kg/c¢T , 160l /min-4kg/c¢T.
The Spec Of Fire Fighting Equipment : 1. Manufactured to EN694: 1996 type A class 2.
2. Fluted/corrugated, non-kink braided hse.
3. Color: inner black, outer black / red.
The Spec Of Fire Fighting Equipment : Automatic sprinklers are available in spray pendent (SSP). Upright (SSU). conventional (CU/P) and side wall (horizontal installed). These sprinklers are incorporated with 5mm diameter glass bulb as a heat sensitivee element nominal tem-perature 68C(155F) or 79C(175F). The glass bulb capsule operating mechanism contain ....
The Spec Of Fire Fighting Equipment : 1. Fire hose valve.
2. Wide applications, easy operation, safety, interchangeability.
The Spec Of Fire Fighting Equipment : 1. The fire hose is used to connect the hydrant and nozzle in the hydrant box or fire truck, both ends of the fire hose is pressing jointed with quick connectors by a aluminium alloy tube, galvaized iron tube or stainless steel tube.
2. The fire hose is resistance to petroleum, ageing. cold water, hot water, acid and ....
The Spec Of Fire Fighting Equipment : Fire hose couplings
The Spec Of Fire Fighting Equipment : 1. AHD 201D1/2 foam head with washable screen by means of turn apart the screw thread collar.
2. AHD 201M1/2 foam head which is designed as a samller shape.
3. Matenrail frame brass ASTM B124 C37700, screen stainless steel wire ASTM A313 S30400.
4. Installation: 1/2 PT(NPT) thread male inlet.
The Spec Of Fire Fighting Equipment : 1. The reducing hydrant valve is served at a higher floor in the tall building. The water pressure of hose nozzle in a higher floor is usually over 7 kgf/cm2 The reducing design is to protect the nozzle pressure constant in 7 kgf/cm2 which is construct as a orifice and coilspring to adjust the water ressure.
2. The v....
The Spec Of Fire Fighting Equipment : The emergency lighting is made and test in accordance with the dysmfstf CNS 8802.
The Spec Of Fire Fighting Equipment : 1. The metallic emergencv ladder is made of stainless steel,which is
in accordance with the standard CNS 13230.
2. A man may escape from top to bottom or from bottom to top by using the ladder.
3. AFE209A.
The Spec Of Fire Fighting Equipment : 1. The slow descent machine is made and tested in accordance with the
standard CNS 13229.
2. ADS 50 IA (HSD)floor/steel wire length 2F/5m,3F/8m,4F/l lm,5F/14m,
6F/17m,7F/20m,8F/23m,9F/26m, IOF/29m, I I F/32m, 12F/35m, 13F/38m.
3. The other length reservation is available.
4. Average speed of descending....
The Spec Of Fire Fighting Equipment : ABC dry chemical powder fire extinguisher which chemicals is ammonium dihydrogen phosphate (NH4 H2 PO4) over 70%. It can be multiple served in fire fighting for fire class A(solid, wood, cotton and paper), class B (Liquid, oil, benzene) and class C (electric apparatus ) by mans of the good flowability. The discharge ra....
The Spec Of Fire Fighting Equipment : 1. Pressure: kgs/cm2.
2. Size available from 1”(25mm) to 4”(100mm).
3. Hose available in all length up to 100ft.
4. 100%polyester jacket is immune to mildew, shows.
5. outstanding resistance to acid, abrasion, aging.
6. xtremely flexible and lightweight for easy handing and racing.
The Spec Of Fire Fighting Equipment : 1. The valve is used in wet pipe sprinkler which is made in accordance with UL260.
2. Dry pipe and deluge valve for fire-protection service.
The Spec Of Fire Fighting Equipment : 1. The foam liquid tank is used to store the foam liquid, which is served in a garage, parking area incorporated with foam head, foam proportionerrr and the other equipments to construct a foam system.
2. The inside of the tank is a rubber bladder which separates foam liquid and water, the bladder of acid-resistant c....
The Spec Of Fire Fighting Equipment : The foam proportioner is used to mix foam and water into a solution by means of the orifice, which is served in aqueous film-forming foam (3%,6%) protein foam liquid (3%,6%).
The Spec Of Fire Fighting Equipment : The orifice fitting set on the foam proportioner to control the solution Ratio by means of the orifice and nozzle port.
The Spec Of Fire Fighting Equipment : 1. The hydrant valve is made and test in accordance with CNS13579 Hydrant valve for fire fighting use, which is also comply with japanese specification.
2. Material body cast bronze JIS H 5111 BC6/ASTM B584 C83600. hand wheel aluminium alloy die casting ASTM B85 A 413.0 i,e, JIS H5302 ADC 1.
The Spec Of Fire Fighting Equipment : 1. The obique (45) hydrant valve is made and test in accordance with CHS13579 Hydrant valve for fire fighting use.
2. Material body cast bronze JIS H5111 BC6/ASTM B584 C83600. hand wheel aluminium alloy die casting ASTM B85 A 413.0 i,e, JIS H5302 ADC 1.
3. The oblique type is used to properly fit a outlet to minimi....
The Spec Of Fire Fighting Equipment : 1. The swivel handle belted hose nozzle with spray head, is a easy portable, to serve straight stream, any fog for fire fighting.
2. The quick connector of the hose nozzle is made and tested in accordance with CNS 10206.
3. Material play pipe copper alloy C2700T or alum alloy A6061, quick conector copper alloy C857....
The Spec Of Fire Fighting Equipment : 1. The fire department connection is designed, made tested in compliance with the standard of a Japen association of firefighting inspection, which is a global qulity.
2. The fire department connection provided 4 type to meet a magnificentoutlook on the building.
3. Two way pillar type fire departmnet connection, ma....
The Spec Of Fire Fighting Equipment : The common type ground fire hydrant have 2 way suctions which connect fire hose to serve a fire fighting.
The Spec Of Fire Fighting Equipment : 1. The detector is made and test in accordance with the standard CNS 8874.
2. The photoelectric smoke detector is made by means of the photoelectric sensing element. When a fire break out, the smoke enter into the detector box to actuate the fire alarm system.
3. The wiring is adopted the new developed SMT (submina....
The Spec Of Fire Fighting Equipment : The T Shape proportioner is applied the principle of Venturi fube, to mix foam and water into a foam watersolution. which is served in aqueous film-forming foam (3%, 6%), protein foam liquid (3%, 6%).
The Spec Of Fire Fighting Equipment : 1. Bronze (bc6) hydrant valve for fire fighting use, 16K. (w.p. 16kgf/cm2).
2. Test in accordance with CNS13579.
3. Also comply with Japanese specifications.
The Spec Of Fire Fighting Equipment : Brass expansion-ring hose couplings for single jacket fire hose. Pin-lug type.
The Spec Of Fire Fighting Equipment : Brass low pressure (lp) hydrant valve, jis 10k. (w.p. 10kgf/cm2).
The Spec Of Fire Fighting Equipment : Brass double inlet swivel adapters (polish finish).
