The Spec Of Water Dispenser Manufacturers : 1. Model: u-106 dual temperature.
2. Cold and hot dual temperature (compressor type).
3. Water source connects from filter water-cleaner or RO purifier (not include).
4. Burning prevent design of hot water handle for safety. 1. Capacity: hot water - 2L; cold water -3.5L.
2. Size: W31xD35xH42 cm. ....
The Spec Of Water Dispenser Manufacturers : 1. Under sink hot water.
2. Made of ss304, compact and space-saving.
3. Steam heating, high temperature and pressure resistance; two-channel temperature controller.
4. Pressure relief valve, hot water check valve and circuit breaker. The machine can either put on countertop or placed within sink. Instant 100oC hot w....
The Spec Of Water Dispenser Manufacturers : 1. Double secure prevents from overheat or dry-heat (by sensor and thermostat).
2. Double secure against water overflow (by sensor and floating valve).
3. Automatic control for purified water refill.
4. Each hot, ambient and chilled water has its own individual tank.
5. Hot water tap with safety device. 1. Chil....
The Spec Of Water Dispenser Manufacturers : 1. Magic water system.
2. Both hot and cold water. 1. Capacity: hot 25L/ cold 8L.
2. Dimension: (D)36 X (W)57 X (H)70 cm. ....
The Spec Of Water Dispenser Manufacturers : 1. 2 in 1:water dispenser & ice maker.
2. Easy to use top water dispenser separately.
3. Easy to use underside ice maker separately.
4. Easy to combine the two machine in one and still can operate separately. 1. A new type combination!
2. 2 in 1:water dispenser & ice maker.
3. Easy to use top water dispense....
The Spec Of Water Dispenser Manufacturers : Detailed Product Description
1) Reverse Osmosis System
2) Equiped Softener
3) Capacity 300L/H ( Equa 2900GPD)
4) Two Stage RO with 2pcs DOW membrane
RO Water Treatment Equipment / Water Purification system 300L/H Capacity of the purified water
300Liter per hour ( 25°C)
Total Power
2.75kw
....
The Spec Of Water Dispenser Manufacturers : 1. Material: ABS, Acetal, PPS, acrylic, nylon, POM, PS, PVC, PP, PA66, TPE, TPU, LCP and so on.
2. Surface finish: chrome plating, oil-printing etc and according to customers' special requirements.
3. Various colors.
4. Injection capability: 80toms~1000toms. 1. Follow customers' sample or drawing to proceed mass....
The Spec Of Water Dispenser Manufacturers : R134A compressor cooling:
1. Cook and cold type is available.
2. Adopt the material met food safety requirement, hygienic and safe.
3. Both hot and cold tanks are made of high quality SS304 stainless steel.
4. Regular hot tank size 1.2 liter, cold tank size 3.8 liter.
(hot and cold tank size can be made as per cus....
The Spec Of Water Dispenser Manufacturers : 1. The MRD drinking water coolers are manufactured with all-stainless steel cabinets.
2. The MRD chilled drinking water fountain is a compact unit using direct chill technology and an internal filtration system.
3. The MRD constructed of high quality materials with stainless steel top with easy fixing to walls for us....
The Spec Of Water Dispenser Manufacturers : Hot and cold water dispenser / water cooler:
1. Streamline design.
2. Micro-chip controlling, VDF display.
3. Popular silver color via oil spraying.
4. Compressor cooling.
5. It can be converted to POU with our conversion kit.
6. With refrigerator. 1. Heating watt: 500w.
2. Cooling watt: 130w.
3. Hea....
The Spec Of Water Dispenser Manufacturers : Cold/hot, cold/warm.
4-stage RO system,
For office or home use.
Provide clean and pure drinking water all day long.
Slender size takes up less space. 33(W) x 35(D) x 95(H) cm.
Cold/hot, cold/warm.
Safety lock for hot water tap.
4-stage RO system included.
(with twist filters and booster pump).
Cold tank vo....
The Spec Of Water Dispenser Manufacturers : Counter top water ionizer:
1. 5 plates solid titanium coated with highest grade nano platinum clan component.
2. 7 sections water quality function: 4 alkaline water & 1 neutral water & 2 acidic water.
3. Multi function LCD screen: pH value, clock, self-clean alarm, abnormal electrolytic cell alert, volume adjustmen....
The Spec Of Water Dispenser Manufacturers : 1. The sample pictures of the products just only for product process reference only.
2. Material: neoprene 3.0mm. 1. Size: 10.5 x 13cm & 10 x 21cm.
2. Package: 25pcs/ PP, 500pcs/ CTN.
3. OEM & ODM are welcome. ....
The Spec Of Water Dispenser Manufacturers : Description:
1. The adoption imports high-efficiency mute compressor.
2. Ice water and hot water power supply all control independently and separately.
3. Pass a domestic and international security test, absolutely match a security standard.
4. The whole series of our company product all reboil function.
5. Use ou....
The Spec Of Water Dispenser Manufacturers : 1. 5 stage RO system 70GPD–with pump; hot, warm and cold.
2. Chilling and heating capacity up to 5.5 liter per hour.
3. Water leak detection. 1. 1st stage: P.P 5u. 2. 2nd stage: CTO active carbon cartridge. 3. 3rd stage: P.P 1u. 4. 4th stage: CSM 70GPD membrane. ....
The Spec Of Water Dispenser Manufacturers : 1. 50 GPD hot, warm and cold water dispensers.
2. 5 stage RO system 50GPD– with pump.
3. Water leak detection.
4. Children safety protection. 1. 1st stage: P.P 5u. 2. 2nd stage: CTO active carbon cartridge. 3. 3rd stage: P.P. 1u. 4. 4th stage: 50 GPD membrane. 5. 5th stage: post inline carbon filter. ....
The Spec Of Water Dispenser Manufacturers : 5 stage RO system 50GPD– with pump; hot, warm and cold. 1. 1st stage: P.P 5u. 2. 2nd stage: CTO active carbon cartridge. 3. 3rd stage: P.P. 1u. 4. 4th stage: CSM 70GPD membrane. 5. 5th stage: post inline carbon filter. ....
The Spec Of Water Dispenser Manufacturers : This elegant design and enduring stainless steel water cooler fits marvellous into a multitude of enviroments. Whether in a modern kitchen, a comfortable living room or executive office, serving refresh chilled water or piping hot water for your convenience. 1. Power: 220v / 50Hz, 110v / 60Hz. 2. Heating watt: 500w....
The Spec Of Water Dispenser Manufacturers : Features
*enclosed base keeps dust, sands away.
*hot water tank and power cut off while water suspension.
*separate cold and hot spigots
*cold water adjustment ranging from 2~7 degrees(C)
*high efficient , enviroment-friendly and noiseless compressor specification:
*Dimension: L 32 * W 40 * H 104cm
*Capaci....
The Spec Of Water Dispenser Manufacturers : Features
*enclosed base keeps dust, sands away.
*hot water tank and power cut off while water suspension.
*separate cold and hot spigots
*cold water adjustment ranging from 2~7 degrees(C) specification:
*Dimension: L 39 * W 40 * H 51.5cm
*Capacity: cold water 2.5 liters, room water 8 liters, hot water 2 lit....
The Spec Of Water Dispenser Manufacturers : Countertop Room, cold hot water auto refilling water dispenser.
Features:
*Connected with RO system, auto refilling, never pouring water out dispenser.
*convenient for doing tea and milk. specification:
*Applicable water: pure water
*Voltage: 110 V AC or 220 V
*Dimension: L 39 * W 40 * H 52cm
*Capacity: ....
The Spec Of Water Dispenser Manufacturers : Features
*enclosed base keeps dust, sands away.
*hot water tank and power cut off while water suspension. specification:
*Dimension: L 32 * W 34 * H 48cm
*Capacity: room water 1 liter, hot water 2 liters ....
The Spec Of Water Dispenser Manufacturers : 1. The sample pictures of the products just only for product process reference only.
2. Material: neoprene 3.0mm. 1. Size: 10.5 x 13cm & 10 x 21cm.
2. Package: 25pcs/ PP, 500pcs/ CTN.
3. OEM & ODM are welcome. ....
The Spec Of Water Dispenser Manufacturers : 1. The sample pictures of the products just only for product process reference only.
2. Material: neoprene 3.0mm. 1. Size: 10.5 x 13cm & 10 x 21cm.
2. Package: 25pcs/ PP, 500pcs/ CTN.
3. OEM & ODM are welcome. ....
The Spec Of Water Dispenser Manufacturers : 1. Hot and cold, floor standing.
2. In simple design (no cabinet).
3. Compressor cooling. 1. Power: 100 ~ 240v / 50 ~ 60Hz.
2. Heating watt: 500w.
3. Cooling watt: 112w.
4. Heating capacity: >=90Deg. C >=5L/H.
5. Cooling capacity: =2L/H.
6. G.W. / N.W. (kg): 18.5 / 17.0.
7. Dimentions: 37 x 38 x 100cm.
8. ....
The Spec Of Water Dispenser Manufacturers : 16L/D floor standing POU hot & cold water dispenser:
1. Hot and cold, floor standing.
2. Convenient push button tap, simple but endurable ( no cabinet).
3. Spray paint.
4. Point of use ( pipeline).
5. Compressor cooling.
6. Adopt the material met National food safety requirement, hygienic and safe.
7. Front-pla....
The Spec Of Water Dispenser Manufacturers : 1. Desk top type.
2. Thermoelectric cooling.
3. Safe water guard for non-spill closure.
4. Option available: hot and warm / cold and warm / hot and cold / hot,cold and warm.
5. Safe thermostat for anti over heating.
6. Tap and full color of body can be changeable. 1. Power：100 ~ 240v / 50 ~ 60Hz.
2. Hea....
The Spec Of Water Dispenser Manufacturers : 1. Desk top type.
2. Thermoelectric cooling.
3. Option available: hot and warm / cold and warm / hot and cold / hot, cold and warm.
4. Safe thermostat for anti over heating.
5. Tap and full color of body can be changeable. 1. Power: 100 ~ 240v / 50 ~ 60Hz.
2. Heating watt: 500w.
3. Cooling watt:68w.
4.....
The Spec Of Water Dispenser Manufacturers : 1. Power supply: ac / dc 12v.
2. Measurement (mm)(L x W x H): 325 x 170 x 310.
3. Useful volume: 6L. 1. N.W.: 3.1Kg.
2. Cold mode: 38 - 68w.
3. Hot mode: 30 - 55w.
4. Cool to: 15 - 25 below ambient temperature.
5. Heat to: 65. ....
The Spec Of Water Dispenser Manufacturers : 1. Hot and cold, floor standing.
2. In simple design (no cabinet).
3. Spray paint.
4. Point of use (pipeline).
5. Compressor cooling & electronic cooling. 1. Power: 100 ~ 240v / 50 ~ 60Hz.
2. Heating watt: 500w.
3. Cooling watt: 112w.
4. Heating capacity: >=90Deg. C >=5L/H.
5. Cooling capacity: =2L/H.
6. ....
