Select
The Spec Of Automatic Band Saws : Blade size:
1. S - 4633SA: 4115L x 27W x 0.9T mm.
2. S - 6235HA: 4900L x 34W x 1.1Tmm.
3. S - 6237SA: 4900L x 34W x1.1T mm.
4. S - 8246SA: 5980L x 41W x 1.3Tmm. 1. S - 4633SA. 2. S - 6235HA. 3. S - 6237SA. 4. S - 8246SA. ....
Select
The Spec Of Automatic Band Saws : 1. PLC controlled automatic fence device by servomotor active as:
(1) Stop: just key in the size, it will automatic moved to the position, ready for the job size.
2. Push fence: just key in all the sizes and quantities, it will move to thelength then push to the first size. When the job finished, it will keep going f....
Select
The Spec Of Automatic Band Saws : 1. Easy and precise length setting.
2. Enlarged tungsten carbide blade guide.
3. An efficient PLC and high quality components are adopted for electrical control system.
4. Control panel and touch screen collocated with human machine interface allow easy operation and high efficiency. The information of problems and ....
Select
The Spec Of Automatic Band Saws : 1. Capacity:
a. 350mm.
b. 820x350mm.
2. Motor:
(1) Blade drive: 3.7KW, 5HP.
(2) Hydraulic pump: 1.5KW, 2HP.
(3) Coolant pump: 0.18KW, 1/4HP.
3. Blade size: 41x1.3x5450mm.
4. Blade speed:
(1) 50HZ: 20~80M/min.
(2) 60HZ: 24~100M/min.
5. Hydraulic oil capacity: 55L.
6. Cutting oil capacity: 56L. 1. N.W. ....
Select
The Spec Of Automatic Band Saws : 1. MW0601-001 human-machine interface panel:control panel designed with touch control system and indicator. Very easy to read and operate, automatic error display, multiple settings and memory functions.
2. Motor inverter: motor with inverter controls the blade speed that is very convenience, precise and stable.
3. L....
Select
The Spec Of Automatic Band Saws : Vertical band saw. 1. Motor: 3HP(or5HP) single phase.
2. Blade speed: 3700 feet per minute.
3. Blade length: 177".
4. Blade capacity: from 3/8" to 1".
5. Table tilts: 10 degree right and 45 left.
6. Precision ground cast iron table: 26"x20-1/2".
7. Maximum cutting height: 12-1....
Select
The Spec Of Automatic Band Saws : Application for woodworking. 1. Wheel diameter: 15"2. Saw blade width: 3/8"-1"3. Saw blade length: 98"4. Table size: 14"x14"5. Table tilting: 0°- 45°6. Table height: 42 (with stand)7. Wheel speed: FPM2000 26008. Motor: 3/4 H.P.9. Max. width of cut: 14 1/4"10. Max. highest ....
Select
The Spec Of Automatic Band Saws : 1. Easy and precise length setting.
2. Tungsten carbide blade guide.
3. Blade breakage sensor.
4. Manual blade tension adjustment device.
5. Speed control b frequency inverter. 1. Automatic chip auger. 2. High quality frequency inverter. 3. Cable protection cover. 4. Crank arm protection device. 5. Frequency in....
Select
The Spec Of Automatic Band Saws : 1. Everising Machine Company of Taiwan R.O.C. was founded in June 1982 by four Chinese partners who foresaw the growing need for locally manufactured band saw machine tools from the local industry working to modernize and build a strong nation.
2. The original 650m2 , 10-employee facility, in the Northeastern section ....
Select
The Spec Of Automatic Band Saws : Blade size (LxWxT):
1. H260HB: 3920 x 34 x 1.1 mm.
2. H-360HA: 4420 x 34 x 1.1 mm.
3. H-460HA: 5450 x 41 x 1.3 mm.
4. H-560HA: 6600 x 54 x 1.6 mm.
5. H-700HANC: 8000 x 54 x 1.6 mm. 1. H260HB. 2. H-360HA. 3. H-460HA. 4. H-560HA. 5. H-700HANC. ....
Select
The Spec Of Automatic Band Saws : 1. Blade speed (50Hz): 20 to 80 m/min (65 to 260fpm), option 20 to 120 m/min (65 to 390fpm).
2. Blade speed (60Hz): 24 to 96 m/min (80 to 315fpm).
3. Blade tension: hydraulic. 1. S-400HA. 2. S-460HB. ....
Select
The Spec Of Automatic Band Saws : 1. Blade speed: 15 - 70m/min.
2. Blade size(V-0615): 7890 x 41 x 1.3 mm.
3. Blade size(V-0625): 9900 x 41 x 1.3 mm. Specification: 1. V-0615. 2. V-0625. ....
Select
The Spec Of Automatic Band Saws : 1. Blade speed: 24,36,45,75m/min (80,120,150,180,250fpm) belt change.
2. Blade size: 3820 x 25 x 0.9 mm (150" x 1" x 0.035").
3. Blade tension: spring loaded-manual.
4. Floor space: 2000 x 1000 mm ( 80" x 40" ). 1. S-12T. 2. S-12A. 3. S-12AA. ....
Select
The Spec Of Automatic Band Saws : Blade size:
1. H-5550: 4880x38x1.3mm (192"x1 1/2"x.05").
2. H-7050: 5450x38x1.3mm (214 1/2"x1 1/2"x0.05").
3. H-8070: 7600x54x1.6mm (299"x2"x.063").
4. H-1010: 8800x67x1.6mm (346 1/2"x21 5/8"x.063").
5. H-1300: 12300x80x1.6mm (484"x3"x .063"....
Select
The Spec Of Automatic Band Saws : 1. Blade size:
(1) VB - 040515 / 25: 4670 x 41 x 1.3 mm.
(2) VB - 070715 / 25: 6800 x 54 x 1.6 mm.
2. Blade speed (variable):
(1) VB - 040515 / 25: 20-100 M/min.
(2) VB - 070715 / 25: 15-75 M/min. Specification: 1. VB - 040515 / 25. 2. VB - 070715 / 25. ....
Select
The Spec Of Automatic Band Saws : Blade size:
1. VBS-0407: 6000 x 41 x 1.3 mm.
2. VBS-0707: 6800 x 54 x 1.6 mm.
3. VBS-0710: 7140 x 54 x 1.6 mm.
4. VBS1013: 8800 x 67 x 1.6 mm.
5. VBS-1316: 10000 x 80 x 1.6 mm. Specification: 1. VBS-0407. 2. VBS-0707. 3. VBS-0710. 4. VBS1013. 5. VBS-1316. ....
Select
The Spec Of Automatic Band Saws : 【STANDARD FEATURES】
1.United Contruction-(Bar feed and saw are on one base).
2.Shuttle type automatic feed.
3.P.L.C. control for all electric and hydraulic function.
4.Hydraulically controlled dual vise clamping system.
5.Floating shuttle vise system.(Except S-250HA)
6.Split front vise.
7.Infinitel....
Select
The Spec Of Automatic Band Saws : 【STANDARD FEATURES】
1.United Contruction-(Bar feed and saw are on one base).
2.Shuttle type automatic feed.
3.P.L.C. control for all electric and hydraulic function.
4.Hydraulically controlled dual vise clamping system.
5.Floating shuttle vise system.
6.Split front vise.
7.Infinitely variable speed control b....
Select
The Spec Of Automatic Band Saws : 【STANDARD FEATURES】
1.United Contruction-(Bar feed and saw are on one base).
2.Shuttle type automatic feed.
3.P.L.C. control for all electric and hydraulic function.
4.Hydraulically controlled dual vise clamping system.
5.Floating shuttle vise system.
6.Split front vise.
7.Infinitely variable speed control b....
Select
The Spec Of Automatic Band Saws : 【STANDARD FEATURES】
1.Shuttle type automatic feed.
2.P.L.C. control for all electric and hydraulic function.
3.Hydraulically controlled dual vise full stroke clamping system. (only for H-260HB)
4.Floating shuttle vise system.
5.Split front vise.
6.Infinitely variable speed control by inverter.
7.Blade speed ....
Select
The Spec Of Automatic Band Saws : 【STANDARD FEATURES】
1.Bi-direction angle swivel -60° ~ 0° ~ +45° with scale indicator.
2.Blade breakage detector device.
3.Blade cleaning brush.
4.Hydraulic flow down feed control.
5.Hydraulic vise clamping.
6.Working light.
7.One piece of bi-metal saw blade.
8.One set of tools with tool box.
【OPTIO....
Select
The Spec Of Automatic Band Saws : 【STANDARD FEATURES】
1.Feed pressure compensation unit.
2.Column type down feed system.
3.Guide arm locked by manual.
4.Vertical clamping device.
5.Full stroke vice hydraulic clamp.
6.Hydraulic work lift roller with manual feeding - infeed side.
7.Auxiliary vise (For HW500/900)
8.One piece of bi-metal saw bl....
Select
The Spec Of Automatic Band Saws : 1. Blade speeds:
(1) 50Hz: 20-80 m/min. (60-264 fpm).
(2) 60Hz: 24-100 m/min. (60-330 fpm).
2. Blade tension: hydraulic
3. Blade size: 5450 x 41 x 1.3mm(214.6 x 1.6" x 0.05")
4. Motors:
(1) Blade drive: 3.7kw (5hp).
(2) Hyd. pump: 1.5kw (2hp).
(3) Coolant pump: 0.2kw (1/4hp). 1. Machine weight: ....
Select
The Spec Of Automatic Band Saws : 1. Capacity:
a. 350mm.
b. 400x350mm.
2. Bundle cutting: 160x50~280x150mm (WXH).
3. Motor:
(1) Blade drive: 3.7KW, 5HP.
(2) Hydraulic pump: 1.5KW, 2HP.
(3) Coolant pump: 0.09KW, 1/8HP.
4. Blade size: 41x1.3x4420mm.
5. Blade speed: 20~100M/min.
6. Hydraulic oil capacity: 75L.
7. Cutting oil capacity: 75L.
8. ....
Select
The Spec Of Automatic Band Saws : 1. Capacity:
(1) 0℃:
a. 250mm.
b. 460x250mm.
(2) 45℃:
a. 250mm.
b. 300x250mm.
(3) 60℃:
a. 200mm.
b. 200x100mm.
2. Motor:
(1) Blade drive: 1.5KW, 2HP.
(2) Hydraulic pump: 0.4KW, 1/2HP.
(3) Coolant pump: 0.09KW, 1/8HP.
3. Blade size: 27x0.9x3505mm.
4. Blade speed: 20~85M/min.
5. Hydraulic oil ....
Select
The Spec Of Automatic Band Saws : 1. Capacity:
a. 20~330mm.
b. 400x330mm.
2. Bundle cutting: 160x50~280x150mm (WXH).
3. Motor:
(1) Blade drive: 3.7KW, 5HP.
(2) Hydraulic pump: 1.5KW, 2HP.
(3) Coolant pump: 0.09KW, 1/8HP.
4. Blade size: 34x1.1x4570mm.
5. Blade speed: 15~100M/min.
6. Hydraulic oil capacity: 80L.
7. Cutting oil capacity: 80L.
....
Select
The Spec Of Automatic Band Saws : 1. Capacity:
a. 20~330mm.
b. 400x330mm.
2. Bundle cutting: 160x50~280x150mm (WXH).
3. Motor:
(1) Blade drive: 5.7KW, 7.5HP.
(2) Hydraulic pump: 1.5KW, 2HP.
(3) Coolant pump: 0.09KW, 1/8HP.
(4) Steel brush: 90W.
4. Blade size: 34x1.1x4570mm.
5. Blade speed: 15~100M/min.
6. Hydraulic oil capacity: 90L.
7. Cut....
Select
The Spec Of Automatic Band Saws : 1. Capacity:
a. 460mm.
b. 480x460mm.
2. Bundle cutting: 210x130~360x230mm (WXH).
3. Motor:
(1) Blade drive: 5.7KW, 7.5HP.
(2) Hydraulic pump: 1.5KW, 2HP.
(3) Coolant pump: 0.18KW, 1/4HP.
4. Blade size: SW5450x41wx1.3T.
5. Hydraulic oil capacity: 88L.
6. Cutting oil capacity: 117L.
7. Material length of singl....
Select
The Spec Of Automatic Band Saws : 1. Capacity:
a. 530mm.
b. 530x530mm.
2. Bundle cutting: 230x400~120x270mm (WXH).
3. Motor:
(1) Blade drive: 5.5KW, 7.5HP.
(2) Hydraulic pump: 1.5KW, 2HP.
(3) Coolant pump: 0.2KW, 1/4HP.
4. Blade size: L5980xW41xT1.3mm.
5. Blade speed: 20~100M/min.
6. Hydraulic oil capacity: 100L.
7. Cutting oil capacity: 110....
Select
The Spec Of Automatic Band Saws : 1. Capacity:
a. 400mm.
b. 420x400mm.
2. Bundle cutting: 200x350~100x200mm (WXH).
3. Motor:
(1) Blade drive: 5.5KW, 7.5HP.
(2) Hydraulic pump: 1.5KW, 2HP.
(3) Coolant pump: 0.2KW, 1/4HP.
4. Blade size: L4880xW41xT1.3mm.
5. Blade speed: 20~100M/min.
6. Hydraulic oil capacity: 90L.
7. Cutting oil capacity: 110L....