The Spec Of Automatic Equipment Manufacturing : Firstly the tablets are guided into leading spring tubes via guide rails of a vibratory feeder.They are then fed into capsule bodies through a reciprocating pusher device in a safe and firm manner.
The tablet feeding station can be installed before or after the powder or pellet feeding station. 1. Capacity: up to ....
The Spec Of Automatic Equipment Manufacturing : Suitable for both straight type tube valve and bent type tube valve. 1. Tube extruding number: single line and twin line.
2. Tube valve type: stright type and bent valve. ....
The Spec Of Automatic Equipment Manufacturing : 1. Auto down feed grinding machine.
2. Working surface of table (mm): 600x2050 (24"x81").
3. Max. table travel (mm): 600 x 2150 (26"x85").
4. Max. surface ground (mm): 600 x 2050 (24"x81").
5. Max. distance center of spindle to table (mm): 760mm(30"). 1. Table speed: 5-25M/ mi....
The Spec Of Automatic Equipment Manufacturing : 1. 4-way free-floating self-adjusting chamber automatically adjusts to the special requirement of changing materials.
2. All operation and monitoring function are controlled through a programmable logic controller.
3. Exclusive auto-tier system increases speed of bale tying, The simpler structure is optimum for les....
The Spec Of Automatic Equipment Manufacturing : All moving slides made of meehanite cast iron. Main casting, or steel fabrication are stress relieved by a non-thermal "FORMULA" 62" process. Standard type TB42/60 TRAUB cams and tooling can be used and interchanged. The manufacturer reserves the right to modify the specifications and mechanisms without ....
The Spec Of Automatic Equipment Manufacturing : 1. Suitable sawing material (all kind of nonferrous material) such as：aluminum door / window frame, aluminum extrusion, heat dissipating piece, plastic steel material, acrylic, copper pipe, carbon board, and timber, etc.
2. Usage: it's convenient for cutting any size. Cutting angle 90° and 45°.
3. Advantages of S....
The Spec Of Automatic Equipment Manufacturing : 1. With strict quality control, best performance, durables and little breakdown rate.
2. Sound is slight during running, no vibration and to install underground screws not required.
3. Through special design which is studied and improved for years, the easy operation goes with automatic control in high efficiency.
4....
The Spec Of Automatic Equipment Manufacturing : 1. Easy for maintenance and adjustment.
2. Multi-safety design to insure machine and personnel safety.
3. Roller table use drive reducer suitable for one operator serves
multi feeders.
4. Tinplate (or aluminum) sheet is carry up by three suction pads, three vacuum generators are equipped.
5. Several magnet sep....
The Spec Of Automatic Equipment Manufacturing : 1. Brief introduction:
Model CAC-60 automatic cartoning machine (carton folding → filling → packing )
Can be used for different types of commodities and various sizes of square paper
boxes/cartons. It is specially design to accommodate highly flexible and easy usage
of capacities. Machine is made of aluminum....
The Spec Of Automatic Equipment Manufacturing : 1. The machine is adopted CNC-controller within CAD software, servo motor and precision rack etc. Device special suitable for cutting glass shape and straight profile. The surface of the machine is equipped with the belt conveyor system to facilitate glass delivery so as to prevent the glass surface form being scratche....
The Spec Of Automatic Equipment Manufacturing : 1. Adopt with fanuc welding robot, most suitable designed tooling, and automatic welding to save labor cost with enhanced quality and steady output.
2. Large operation range to increase applicable to various sizes of work pieces.
3. Teaching type for easy operation & high production efficiency, auto displays error me....
The Spec Of Automatic Equipment Manufacturing : 1. HC-bobbin winder series.
2. To develop & design new models according to the needs of customers.
The Spec Of Automatic Equipment Manufacturing : No mater what the kind of sanding application, Chin Chao Sheng can provide the machines that fully meet your requirements. We have the resources to design the machine to suit your rigorous requirements. 1. Total length: 3mm.
2. Working width: 420mm. ....
The Spec Of Automatic Equipment Manufacturing : Adopts Swiss Collamat labeling engine for easy operation. No maintenance needed. Accurate labeling, stainless steel structure, wheels & fixed stand available. 1. Speed: 20m/ min Max.
2. Label width: 95 mm Max.
3. Labeling accuracy: +-1 mm.
4. Drive: 2 phase step motor.
5. Control: 16 bit microprocessor.
6. Vo....
The Spec Of Automatic Equipment Manufacturing : 1. Automatic waste paper collection,continuous cold laminating (allowable to make a cold laminating of one single sheet).
2. Continuous automatic switch and pedal switch.
3. Stable long figure lamination, also with good feeding system.
4. Vacuum platform for level lamination. 1. CM-850(85")(0~2150mm), CM-75....
The Spec Of Automatic Equipment Manufacturing : 1. Product name: frame automatic dryers.
2. Product No.: CL-0108. 1. No.: CL-0108.
2. Power: 380v, 3Ø.
3. Electric current: 100A.
4. Size: 4770 x 1780 x 2300m/m.
5. Accessories: lens for PC and acrylic. ....
The Spec Of Automatic Equipment Manufacturing : 1. Designed specifically for thin carrier plates.
2. Equipped with a vacuum pump to suck up thin carrier plate.
3. Thin carrier plate are put on loading cassette manually. A robot hand pulls the plate into preparing position.
4. Loader: move the plate from load cassette to on vacuum plate.
5. Added heaters wher....
The Spec Of Automatic Equipment Manufacturing : CHV-16AH-500 CNC Full Automatic Continuous Rolling Screen Printing Machine
1. This machine is fit for printing whole roll of fabric labels, ID lanyards, tags, etc.
2. It adopts twin-axle servomotor and colored monitor, featuring being easy and efficient to operate and precise printing. 1. The base adopts servomot....
The Spec Of Automatic Equipment Manufacturing : 1. Edge protector forming and assembling machine.
2. Application: employs tin sheet coil for automatic corner guarding. Fast operation and elegant outlook. It saves 60% cost than the conventional models. 1. Model: HC-45TRA7.
2. Height from floor to table: 910 mm.
3. Air consumption: 15 L c/s.
4. Motor: 1/2 HP.
....
The Spec Of Automatic Equipment Manufacturing : 1. Whole machine frame is made out of stainless steel SUS304. The frame is siple, beauty, waterproof and don't rust. It is easily for cleansing.
2. The especial cutting system: adopting the shisht and convolute technology. The label cutting is flat, not burr.
3. The label location set assures the sleeving veracity.
....
The Spec Of Automatic Equipment Manufacturing : 1. Introduction:
A capacitor after winding, heat stabilizing and end spraying often be a short circuit. Clearing is achieved by applying a voltage across the capacitor so that sufficient current can flow to clear the short without allowing too much to flow and so damage the end connection.
2. Feature:
(1) Automatic ....
The Spec Of Automatic Equipment Manufacturing : 1. Paint recycling device can saving the paint using cost.
2. Close type transport increases the coating film thickness of side edge of painting object.
3. Suitable for solvent paint and water base paint using.
4. Feeding air unit reduces inside of spray booth's dust and increase the quality of product.
5. High spe....
The Spec Of Automatic Equipment Manufacturing : This line is used in decoiling, straightening and shearing different specification coils into flat steel plate with different width and length, and then stacking the flat steel plate. This production line which is high automatization and simple operation can process all kinds of cold or hot rolling carbon steel, galvan....
The Spec Of Automatic Equipment Manufacturing : Suitably used for various kinds of 4-binding buttons. Master buttons, hollow rivet, prong snap buttons and solid buttons, etc. 1. Capacity: 180 PCS/min.
2. Motor: 1/2 HP.
3. Machine size: 32" x 32" x 63".
4. Packing size: 34" x 34" x67".
5. N.W.: 250 KG.
6. G.W.: 300 KG. ....
The Spec Of Automatic Equipment Manufacturing : 1. L-300 can coherent with LLR-300 after printing the product follow up right through to process die-cutting, lamination and to collate the waste material.
2. L-300 can finish process the product independently.
3. L-300 can process the electron product and doing duplication lamination.
4. Has computer hold puncher c....
The Spec Of Automatic Equipment Manufacturing : In order to resolve the unavoidable listurbance of ropiness to be formed after the washing and rope dyeing of fabrics and the fabrics great loss resulting from the tilting over and inaccruacy of the slitting, a labor-saving time-saving, consecutive pre-cise high efficiency automatic trace slitting machine has been deve....
The Spec Of Automatic Equipment Manufacturing : 1. Including tension control which can keep the cloth smooth and look beautiful.
2. Suitable for all kinds of PVC and PU leather cows leather and pig's leather could be pleating with optional parts.
3. The automatic cloth rolling can save manpower with high productivity.
4. The temperature control system is adopted....
The Spec Of Automatic Equipment Manufacturing : Features:
1. Auto dual-layer workbench interchanging, feeding and welding work simultaneously.
2. Welding point controlled by micro-computer, easy for adjustment.
3. Perfect for heavy production.
4. Average speed: 2 workpiece only take 1 minute to finish. Application:
Animal cage, display rack, gridiron, wir....
The Spec Of Automatic Equipment Manufacturing : 1. SY-RA104 auto rotary type trimming machine (4-Station Type).
2. Application: Suitable for the trimming of the huge quantity and less type oil seals, cups, packing, and soft rubber parts, etc.
3. Features:
(1) Auto feeding, one opeator can operate many sets of machine simultaneously to increase the working effic....
The Spec Of Automatic Equipment Manufacturing : 1. With hydraulic V type mill roll stand, suit for all type of machines; particularly apply to the machines at the speed of 100M or above.
2. Greater splicing and high speed. The main machine no needs to reduce its speed. Operate easily.
3. This machine is used a very high sensitive tension electronic controller an....
