The Spec Of Belt Sanders : 1. The sander can sand workpieces in either the horizontal or vertical position or any angle in between 0 to 90 degree.
2. Belt plate is made from precision ground steel.
3. Main sanding paper runs in precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism.
4. The worm and gear mechanism....
The Spec Of Belt Sanders : 3/8" (10mm) belt sander.
Free speed: 18000 RPM.
Air consumption: 2CFM (56.6L/min). Weight: 1.76lb (0.8kg).
Length: 12"(305 mm).
Sound: dB 81.
Belt / PAD size: 3/8"x13"(10x330mm).
Air inlet: 1/4".
Air pressure: 90psi (6.3bar).
Hose size: 3/8"(10mm). ....
The Spec Of Belt Sanders : 1. The accessories can be applied such as emery cloth, woolen felt, scratch pad, buff wheel. The main operation is for sanding, grinding and polish.
2. The item is suitable for following operation:
(1) For wooden products: table, chair, sideboard, bed, cheat of drawers etc.
(2) For plastic products: clear finish of ....
The Spec Of Belt Sanders : CONSTRUCTION-
1. BASE: IRON PLATE
2. TABLE: CAST IRON
3. FRAME: IRON PLATE
4. DISC: ALUMINUM
The Spec Of Belt Sanders : 1. Air belt sander (10 x 330mm)- air tool.
2. Sanding pad: 3-15/16" x 13".
3. Free speed: 16,000 rpm.
4. Avg. air consumption: 310 l/min. (11 cfm).
5. Overall length: 10-1/4" (260 mm).
6. Air inlet size: 1/4" pt.
7. Air hose (i.d): 3/8". 1. Net weight: 1.9 kgs (0.9 lbs).
2. 10pcs/....
The Spec Of Belt Sanders : Belt sander is disigned to used in sanding some area which only allow very narrow space for the extension sanding bar to reach and complete the sanding mission. 1. Sanding pad: 7/8" x 20"(20 x 520 mm). 2. Free speed: 16,000 rpm. 3. Overall length: 17 " ( 430 mm ). 4. Air cons.: 6 cfm ( 171 l/min). 5.....
The Spec Of Belt Sanders : 1. Free speed: 16000 RPM.
2. Air inlet 1/4".
3. Air pressure: 6.2 kg/cm3 (90psi).
4. Air consumption: 8 CFM.
5. Overall length: 290 mm.
6. Air consumption: 360 L/min. 1. Size of belt: 10 x 330 mm.
2. Weight: 0.8 kg. ....
The Spec Of Belt Sanders : 1. Abrasive belt speed (60hz): 560m/min.
2. Conveyor belt speed: 3.5 fpm.
3. Abrasive belt drive motor: 2hp, single phase. 1. Working width: 12".
2. Maximum working thickness: 5".
3. Abrasive belt width: 13".
4. Abrasive belt length: 32".
5. Net / gross weight / cuft: 165 /197 kgs/16.2 cuf....
The Spec Of Belt Sanders : 1. Main motor std/max (HP): 10.
2. Feed motor (HP): 1.
3. Hoist motor (HP): 1 / 2.
4. Feed speed (m/min/fpm): 4-16.
5. Net weight (kgs): 750.
6. Gross weight (kgs): 900. 1. Working width (inch/mm): 24 / 610.
2. Working thickness (inch/mm): 5 / 127.
3. Sanding belt size (inch): 25 x 60.
4. Packing siz....
The Spec Of Belt Sanders : 1. The machine is massive constructed throughout for continuous heavy sanding.
2. Rugged construction: The main frame is fabricated of heavy duty steel plate and ribbed to minimize vibration and deflection.
3. Convenient controls: All operating controllers are centralized in a convenient control panel. Large, clea....
The Spec Of Belt Sanders : CONSTRUCTION OF BELT SANDER-
1. BASE: IRON PLATE
2. TABLE: CAST IRON
3. DISC: ALUMINUM
The Spec Of Belt Sanders : CONSTRUCTION
1. BASE: CAST ALUMINUM
2. TABLE: CAST IRON
3. FRAME: CAST ALUMINUM
4. DISC: ALUMINUM
The Spec Of Belt Sanders : CONSTRUCTION-
1. BASE: CAST IRON
2. TABLE: CAST IRON
3. FRAME: CAST IRON
4. DISC: CAST IRON
The Spec Of Belt Sanders : 1. The accessories can be applied such as emery cloth. The main operation is for sanding.
2. The item is suitable for following operation:
(1) For wooden products: table, chair, sideboard, bed, cheat of drawers etc.
(2) For plastic products: clear finish of round and curved surface, deburring and removing scratch of....
The Spec Of Belt Sanders : 1. The accessories can be applied such as emery cloth. The main operation is for sanding.
2. The item is suitable for following operation:
(1) For wooden products: table, chair, sideboard, bed, cheat of drawers etc.
(2) For plastic products: clear finish of round and curved surface, deburring and removing scratch of....
The Spec Of Belt Sanders : Features:
1. Open end sander provides up to 36" sanding capacity.
2. Rugged rubber covered drum support frame.
3. Configuration of two sanding drums provides highly efficient sanding performance.
4. A depth scale in both inches and metric graduation is provided on the drum support frame for indicating the ....
The Spec Of Belt Sanders : 1. Main motor std/max (HP): 15/10.
2. Feed motor (HP): 1.
3. Hoist motor (HP): 1 / 2.
4. Feed speed (m/min/fpm): 4-16.
5. Net weight (kgs): 1000.
6. Gross weight (kgs): 1200. 1. Working width (inch/mm): 24 / 610.
2. Working thickness (inch/mm): 5 / 127.
3. Sanding belt size (inch): 25 x 60.
4. Packin....
The Spec Of Belt Sanders : 1. Main motor std/max (HP): 15/20.
2. Feed motor (HP): 1.
3. Hoist motor (HP): 1 / 2.
4. Feed speed (m/min/fpm): 4-16.
5. Net weight (kgs): 1100.
6. Gross weight (kgs): 1300. 1. Working width (inch/mm): 36 / 915.
2. Working thickness (inch/mm): 5 / 127.
3. Sanding belt size (inch): 37 x 60.
4. Packin....
The Spec Of Belt Sanders : 1. Main motor std/max (HP): 15, 10/20, 15.
2. Feed motor (HP): 2.
3. Hoist motor (HP): 1 / 2.
4. Feed speed (m/min/fpm): 4-16.
5. Net weight (kgs): 1600.
6. Gross weight (kgs): 1800. 1. Working width (inch/mm): 36 / 915.
2. Working thickness (inch/mm): 5 / 127.
3. Sanding belt size (inch): 37 x 60.
4....
The Spec Of Belt Sanders : 1. Main motor std/max (HP): 15, 10/20, 15.
2. Feed motor (HP): 2.
3. Hoist motor (HP): 1 / 2.
4. Feed speed (m/min/fpm): 4-16.
5. Net weight (kgs): 1300.
6. Gross weight (kgs): 1500. 1. Working width (inch/mm): 24 / 610.
2. Working thickness (inch/mm): 5 / 127.
3. Sanding belt size (inch): 25 x 60.
4....
The Spec Of Belt Sanders : 1. Main motor std/max (HP): 15, 10/20, 15.
2. Feed motor (HP): 3.
3. Hoist motor (HP): 1 / 2.
4. Feed speed (m/min/fpm): 4-16.
5. Net weight (kgs): 1800.
6. Gross weight (kgs): 2000. 1. Working width (inch/mm): 36 / 915.
2. Working thickness (inch/mm): 5 / 127.
3. Sanding belt size (inch): 37 x 60.
4....
The Spec Of Belt Sanders : 1. Main motor std/max (HP): 20, 15.
2. Feed motor (HP): 3.
3. Hoist motor (HP): 1 / 2.
4. Feed speed (m/min/fpm): 4-16.
5. Net weight (kgs): 3000.
6. Gross weight (kgs): 3500. 1. Working width (inch/mm): 43 / 1100.
2. Working thickness (inch/mm): 5 / 127.
3. Sanding belt size (inch): 43 x 75.
4. Pack....
The Spec Of Belt Sanders : 1. Main motor std/max (HP): 25, 20.
2. Feed motor (HP): 3.
3. Hoist motor (HP): 1 / 2.
4. Feed speed (m/min/fpm): 4-16.
5. Net weight (kgs): 3500.
6. Gross weight (kgs): 4000. 1. Working width (inch/mm): 52 / 1320.
2. Working thickness (inch/mm): 5 / 127.
3. Sanding belt size (inch): 52 x 75.
4. Packi....
The Spec Of Belt Sanders : 1. Automatic Wide Belt Sander - available for each kind of board polishing.
2. Automatic Wide Belt Planer Sander - available for heavy cutting of composer, jointed panels and solid wood.
3. Automatic Wide Belt Sealer Sander - available for lacquered panels sanding (generally used for board polishing after painting)....
The Spec Of Belt Sanders : 1. Automatic Wide Belt Sander - available for each kind of board polishing.
2. Automatic Wide Belt Planer Sander - available for heavy cutting of composer, jointed panels and solid wood.
3. Automatic Wide Belt Sealer Sander - available for lacquered panels sanding (generally used for board polishing after painting)....
The Spec Of Belt Sanders : 1. Automatic Wide Belt Sander - available for each kind of board polishing.
2. Automatic Wide Belt Planer Sander - available for heavy cutting of composer, jointed panels and solid wood.
3. Automatic Wide Belt Sealer Sander - available for lacquered panels sanding (generally used for board polishing after painting)....
The Spec Of Belt Sanders : 1. Automatic Wide Belt Sander - available for each kind of board polishing.
2. Automatic Wide Belt Planer Sander - available for heavy cutting of composer, jointed panels and solid wood.
3. Automatic Wide Belt Sealer Sander - available for lacquered panels sanding (generally used for board polishing after painting)....
The Spec Of Belt Sanders : 1. Automatic Wide Belt Sander - available for each kind of board polishing.
2. Automatic Wide Belt Planer Sander - available for heavy cutting of composer, jointed panels and solid wood.
3. Automatic Wide Belt Sealer Sander - available for lacquered panels sanding (generally used for board polishing after painting)....
The Spec Of Belt Sanders : 1. Automatic Wide Belt Sander - available for each kind of board polishing.
2. Automatic Wide Belt Planer Sander - available for heavy cutting of composer, jointed panels and solid wood.
3. Automatic Wide Belt Sealer Sander - available for lacquered panels sanding (generally used for board polishing after painting)....
The Spec Of Belt Sanders : 1. Automatic Wide Belt Sander - available for each kind of board polishing.
2. Automatic Wide Belt Planer Sander - available for heavy cutting of composer, jointed panels and solid wood.
3. Automatic Wide Belt Sealer Sander - available for lacquered panels sanding (generally used for board polishing after painting)....
