The Spec Of Drilling & Milling Machine : 1. Available for milling, boring, drilling, tapping and etc.
2. Gear head can be tied 90" right &left each.
3. Clutch operated micro down feed.
4. The headstock is composed 11 pieces precision of gear (all 2.0mm pitch) and all immersed in oil bath.
5. Available CE standard as fig shows such as: electric....
The Spec Of Drilling & Milling Machine : 1. Travel:
(1) X-axis travel: 2000, 3000(opt)mm.
(2) Y-axis travel: 1500mm.
(3) Z-axis travel: 1500mm.
(4) W-axis travel: 550mm.
(5) Spindle center to table top: 0~1500mm.
(6) Spindle nose to table center: -130~1055mm.
2. Table:
(1) Table size: 1200 x 1500mm.
(2) T slot (wide x no .x pitch): 22H8 x 7 x ....
The Spec Of Drilling & Milling Machine : 1. Meehanite cast.
2. Imported precise leading screw.
3. Tempered, quenched and hardened slide way.
4. Japan NSK P4 grade spindle bearing.
5. Taiwan precise milling head.
6. Step speed milling head is optional.
7. Inverter speed milling head is optional.
The Spec Of Drilling & Milling Machine : 1. Heavy duty geared head spindle power feed (0.12-0.18-0.25mm per/rev).
2. Hardened MT4 spindle / coolnat base.
3. Drilling capacity in cast iron: 50mm.
4. Drilling capacity in mild steel: 32mm.
5. Tapping capacity: 22mm.
6. Face mill capacity: 100mm.
7. End mill capacity: 25mm.
The Spec Of Drilling & Milling Machine : 1. Meehanite cast.
2. Imported precise leading screw.
3. Tempered, quenched and hardened slide way.
4. Japan NSK P4 grade spindle bearing.
5. Taiwan precise milling head.
6. Spindle speed: inverter speed.
7. Step speed milling head is optional.
8. Variable speed milling head is optional.
The Spec Of Drilling & Milling Machine : 1. Mehanite cast.
2. Imported precise leading screw.
3. Tempered, quenched and hardened slide way.
4. Japan NSK Cp4 grade spindle bearing.
5. Variable speed milling head is optional.
6. Step speed milling head is optional.
The Spec Of Drilling & Milling Machine : 1. Mehanite cast.
2. Imported precise leading screw.
3. Tempered, quenched and hardened slide way.
4. Japan NSK Cp4 grade spindle bearing.
5. Taiwan precise variable speed milling head.
6. Step speed milling head is optional.
7. Inverter speed milling head is optional.
8. Strengthened saddle.
The Spec Of Drilling & Milling Machine : 1. Mehanite cast.
2. Imported precise leading screw.
3. Tempered, quenched and hardened slide way.
4. Japan NSK Cp4 grade spindle bearing.
5. Taiwan precise variable speed milling head.
6. Step speed milling head is optional.
7. Inverter speed milling head is optional.
8. Strengthened saddle.
9. Two support ped....
The Spec Of Drilling & Milling Machine : 1. Imported precise leading screw.
2. Tempered, quenched and hardened slide way.
3. Japan CP5 grade spindle bearing.
4. Variable speed milling head is optional.
5. Mainland made precise milling head.
6. Variable speed milling head is optional.
7. Elevating motor is optional.
The Spec Of Drilling & Milling Machine : 1. Imported precise leading screw.
2. Tempered, quenched and hardened slide way.
3. Japan CP5 grade spindle bearing.
4. Mainland made precise milling head.
5. Step speed milling head is optional.
The Spec Of Drilling & Milling Machine : 1. Imported precise leading screw.
2. Tempered, quenched and hardened slide way.
3. Japan CP5 grade spindle bearing.
4. Mainland made precise milling head.
5. Variable speed milling head is optional.
6. Elevating motor is optional.
The Spec Of Drilling & Milling Machine : 1. Imported precise leading screw.
2. Tempered, quenched and hardened slide way.
3. Japan CP5 grade spindle bearing.
4. Mainland made precise milling head.
5. Step speed milling head is optional.
6. Elevating motor is optional.
The Spec Of Drilling & Milling Machine : 1. Mehanite cast.
2. Imported precise leading screw.
3. Tempered, quenched and hardened slide way.
4. Japan NSK Cp4 grade spindle bearing.
5. Taiwan precise variable speed milling head.
6. Step speed milling head is optional.
7. Inverter speed milling head is optional.
8. Strengthened saddle.
9. Two support ped....
The Spec Of Drilling & Milling Machine : 1. Available for milling, drilling, & tapping etc.
2. Seel plate machine stand & chip tray.
3. Z-axis manual memory feed.
4. Geared head can be tilted 90° R & L each.
The Spec Of Drilling & Milling Machine : 1. Available for milling, boring, drilling, tapping and etc.
2. Gear head can be tilted 90° right 4 left each.
3. Clutch operated micro down feed.
4. The headstock is composed 11 pieces precision of gear (all 20.mm pitch) and all immersed in oil bath.
5. Available CE standard as fig shows such as: control system, ....
The Spec Of Drilling & Milling Machine : 1. Travel:
(1) X axis travel: 2000mm.
(2) Y axis travel: 1200mm.
(3) Z axis travel: 1200mm.
(4) Spindle center to table top: 0-1200mm.
(5) Spindle nose to table center: 275-1475mm.
2. Table:
(1) Table size: 800 x 800mm.
(2) T slot: 22H7mm.
(3) Max. load capacity: 3000kg.
(4) Clamping force: 5000kg.
....
The Spec Of Drilling & Milling Machine : 1. Capacity:
(1) X axis (Table longitudinal): 1600mm.
(2) Y axis (Spindle vertical): 1000mm.
(3) Z axis (Table cross): 1250mm.
(4) W axis (spindle axial): 400mm.
(5) Spindle center to table top: 0-1000mm.
(6) Spindle end to table center: 362-1612mm.
2. Table:
(1) Work space: 1000 x 800mm.
(2) T-slot (wi....
The Spec Of Drilling & Milling Machine : 1. Capacity:
(1) Table travel (X axis): 1200mm.
(2) Head travel (Y axis): 1200mm.
(3) Table travel (Z axis): 800mm.
(4) Spindle center to table top: 0-1200mm.
(5) Spindle end to table center: 255-1055mm.
2. Table:
(1) Table size overall: 1100 x 800mm.
(2) T slot (width x no.x pitch): 20 x 7 x 100mm.
(3....
The Spec Of Drilling & Milling Machine : 1. Capacity:
(1) Table travel (X axis): 1400mm.
(2) Head travel (Y axis): 1200mm.
(3) Table travel (Z axis): 1100mm.
(4) Spindle center to table top: 0-1200mm.
(5) Spindle end to table center: 255-1355mm.
2. Table:
(1) Table size overall: 1100 x 800mm.
(2) T slot (width x no.x pitch): 20 x 7 x 100mm.
(....
The Spec Of Drilling & Milling Machine : 1. Capacity:
(1) Table travel (X axis): 1800mm.
(2) Head travel (Y axis): 1400mm.
(3) Table travel (Z axis): 1250mm.
(4) Spindle center to table top: 0-1400mm.
(5) Spindle end to table center: 255-1505mm.
2. Table:
(1) Table size overall: 1500 x 800mm.
(2) T slot (width x no.x pitch): 20 x 7 x 100mm.
(....
The Spec Of Drilling & Milling Machine : 1. Motor: 3phase 1.5HP.
2. Spindle speed (RPM): O~2500.
3. Working capacity in mild steel:
(1) Drilling: 40mm (1-1/2").
(2) Face mill: 100mm (4").
(3) End mill: 20mm (3/4").
(4) Tapping: 20mm (3/4").
(5) In light alloy: 32mm (1-1/14").
The Spec Of Drilling & Milling Machine : 1. Motor: 3phase 1.5HP.
2. Spindle speed (RPM): O~2500.
3. Working capacity in mild steel:
(1) Drilling: 40mm (1-1/2").
(2) Face mill: 100mm (4").
(3) End mill: 20mm (3/4").
(4) Tapping: 20mm (3/4").
(5) In light alloy: 32mm (1-1/14").
