The Spec Of EDM Manufacturers : 1. 15-inch color monitor.
2. Ten-step depth eroding table menu.
3. 26 eroding parameter libraries with 100 group each.
The Spec Of EDM Manufacturers : 1. Compact construction, easy mobility and low cost.
2. Easy to operate.
3. Good for drilling start holes for wire cut EDM.
4. Good for deep hole drilling on super hard alloy and powder metallurgical steel materials.
5. Designed for small, large and irregularly shaped material fine hole drilling.
6. Suitable f....
The Spec Of EDM Manufacturers : 1. 60 groups of different moulds or customer numbers could be stored.
2. Manual edit.
3. Auto Z edit.
4. Intelligent edit.
5. All three edit modes can finish the process like thick middle slender in a time.
6. Coordination can be metric/ British tabbed.
7. Discharge condition will adjust itself if discharge unsta....
The Spec Of EDM Manufacturers : 1. CNC series.
2. The development of fully computerized control system - main products include CNC numerical control machine and NC programme machine, which are applicable to the various demands in industries, such as aerospace industry, optical fiber component, precision auto part, IC package, and the machining of sp....
The Spec Of EDM Manufacturers : 1. A.T.C. & C axis are available for fully automated & non-stop machining (option).
2. 3 axes 6 directions machining, multi cavities machining, circle orbiting, square orbiting, internal / external spherical machining, 45 degrees corner machining, any angle orbiting, XY, XZ, X.Y.Z plane machining.
3. 3 axes linear ma....
The Spec Of EDM Manufacturers : 1. The x- and y-axis routine utilizes the direction of the machine head so the work tank is not limited to the weight of the work piece for lasting performance stability.
2. The X.Y.Z axis Utilizes imported servo motor and high precision linear bearing V-guidway and ball screw to enable consecutive sparking and cuttin....
The Spec Of EDM Manufacturers : 1. By using pure water as working fluids to pursue high machining speed and low copper wear ratio.
2. Achieve high efficiency and satisfy environmental protection requirement.
3. If associate with Wire-Cut EDM, you can get various functions for mold machining.
The Spec Of EDM Manufacturers : 1. Automatic point to point assisting positioning & locating function.Auto search for machine center provides efficient mold proofreading ability.
2. Automatic zero setting for machine center point.When power supply is interrupted the computer will instantly search for center.
3. It has circular, rectangular, crisscr....
The Spec Of EDM Manufacturers : 1. CNC series.
2. The development of fully computerized control system - main products include CNC numerical control machine and NC programme machine, which are applicable to the various demands in industries, such as aerospace industry, optical fiber component, precision auto part, IC package, and the machining of sp....
The Spec Of EDM Manufacturers : 1. ZNC series.
2. The development of fully computerized control system - main products include CNC numerical control machine and NC programme machine, which are applicable to the various demands in industries, such as aerospace industry, optical fiber component, precision auto part, IC package, and the machining of sp....
The Spec Of EDM Manufacturers : 1. Employs 32 bits industrial grade computer for mximum stabillity, fast execution, and great memory capacity.
2. Employs advanced windows display for convenient operation.
3. Automatic traverse and positioning function for three axes.
4. Maximum 1000 positioning holes for each life.
5. Over 8 modes orbiting mode....
The Spec Of EDM Manufacturers : 1. Employs 32 bits industrial grade computer for mximum stabillity, fast execution, and great memory capacity.
2. Automatic traverse and positioning function for three axes.
3. Maximum memory capatity is up to 100 working files & Maximum 1000 postitioning holes for each files.
4. Side machining directions: X+,X-,Y+....
The Spec Of EDM Manufacturers : 1. Table is hardended.
2. Constructed of high quality cast iron, quench treated.
3. X, Y-axis high precision ballscrews.
4. Fast response MOSFET machining circuits.
5. Auto fire extinguisher, fire sensor, arcing sensor, dielectric level & temperature sensor are standard functions.
6. Interchangeable insert-boeard....
The Spec Of EDM Manufacturers : 1. Table is hardended.
2. Constructed of high quality cast iron, quench treated.
3. X, Y-axis high precision ballscrews.
4. Fast response MOSFET machining circuits.
5. Auto fire extinguisher, fire sensor, arcing sensor, dielectric level & temperature sensor are standard functions.
6. Interchangeable insert-boeard.....
The Spec Of EDM Manufacturers : 1. The machining circuit is designed with MOSFET driver for fast machining. Three-setup voltage for fine machining effect.
2. The machine is micro-controlled.
3. Intlligent deep hole machining control. Simply enters yhe machining current, and the other machining parameters will set automatically.
4. Changing param....
The Spec Of EDM Manufacturers : 1. CAD design and high precision structure.
2. FC-30 casting made from Furan No-Bake Molding system.
3. Base, Saddle, Column and Spindle are with synchronous boring to keep the highest precision.
The Spec Of EDM Manufacturers : 1. CAD design and high precision structure.
2. FC-30 casting made from Furan No-Bake Molding system.
3. Base, Saddle, Column and Spindle are with synchronous boring to keep the highest precision.
The Spec Of EDM Manufacturers : 1. CAD design and high precision structure.
2. FC-30 casting made from furan no-bake molding system.
3. Base, saddle, column and spindle are with synchronous boring to keep the highest precision.
The Spec Of EDM Manufacturers : 1. CAD design and high precision structure.
2. FC-30 casting made from furan no-bake molding system.
3. Base, saddle, column and spindle are with synchronous boring to keep the highest precision.
The Spec Of EDM Manufacturers : 1. Product name: electric discharge machine.
2. Product No.: S755 SE.
The Spec Of EDM Manufacturers : 1. Producnt name: electric discharge machine.
2. Produc No.: S550 SE.
The Spec Of EDM Manufacturers : Electric discharge machine.
The Spec Of EDM Manufacturers : 1. Product name: electric discharge machine.
2. Produc No.: S325 CMAX.
The Spec Of EDM Manufacturers : 1. 5 Banks parameter data. Each set can save various machining parameters. Available to expand to 10 sets (optional).
2. Parameter data can be finely adjusted and is suited for a range of machining operations. The unit can also use preset parameter data for easy operation.
3. EDP function: point sparking (surface spa....
The Spec Of EDM Manufacturers : 1. 10 sets working coordinate for setting (including machine coordinate).
2. 10 banks parameter setting data, Each set can save various machining parameters.
3. Parameter data condition can be fine adjusted. Suited for a range of machining operations. The unit can also use preset parameter data for easy operation.
4....
The Spec Of EDM Manufacturers : 1. Compact hardware and high quality human-machine interfact.
2. User friendly and compatible.
3. Automatic tool change, auto guide change and intelligent tool compensation.
4. Flexible and maintainable.
The Spec Of EDM Manufacturers : 1. Uses special discharge circuits for different materials eroding
and adopt AFC circuit to be a discharge pulse regulator to stabilizes the current flow.
2. All series can make stable sparking and with high precision.
The Spec Of EDM Manufacturers : 1. X,Y,Z,U,V axes simultaneously controllable high performance high precise CNC Wire Cut.
2. Custom design the controller hardware & software. Easy to operate
3. Wide range of application for skill or beginner engineer in experienced.
The Spec Of EDM Manufacturers : SE series features:
1. mpoloys micro-processor control and single chip treated.
2. Touch sensing control panel features oil and mist resistance.
3. High memory capacity.
4. Easy operation.
The Spec Of EDM Manufacturers : SE series features:
1. mpoloys micro-processor control and single chip treated.
2. Touch sensing control panel features oil and mist resistance.
3. High memory capacity.
4. Easy operation.
