The Spec Of Extruder Manufacturers : *Model : EKA series
*Final products : Depending on users’ requirements and screw configuration.
*Capacity(kg/hr) : 30~1600, the mini capacity for laboratory model from 2-10kg per hour.
The Spec Of Extruder Manufacturers : PC Hollow profile sheet exhibits extremely high light transmittance. This product is resistant to weather, fire, impact, and is light weight, insulates heat, and is resistant to UV rays. Some of the many applications include light covers, greenhouses, interior decor, sound proofing panels and advertising billboards.
The Spec Of Extruder Manufacturers : Product Name: Extruder For the product specifications, please refer to our official website. ....
The Spec Of Extruder Manufacturers : Based on expertise technique, KOWIn designs and manufactures the extrusion-pelletizing line in aspect of customer and operator. A production line of low power consumption, high capacity and easy-operation, it allows customers to produce high quality recycled pellets. KOWIn continues researching and developing updated m....
The Spec Of Extruder Manufacturers : 1. Product name: PP corrugated extrusion line.
2. Product No.: 268.
3. Electricity control cabinet: adopt SSR and PLC control system. 1. Extruder: (1) Screw diameter: Ø100mm. (2) Screw L/D ratio: 33:1. (3) Barrel temperature control: 5 zones. (4) Motor: 125HP SIEMENS. (5) Screen changer: Oil pressure scree....
The Spec Of Extruder Manufacturers : PP PS Film Extrusion Line
Product Applications: Stationary film,Food package,Electronic material package……
The Spec Of Extruder Manufacturers : PE Extruder and Printing Machine
used for blowing variours plastic film of low density polyethylene(LDPE), high density polyene(HDPE) and linear low density polyethylene(LLDPE)etc., which are widely used for packing liquid, printng lamination, garments, textile, food stuff , daily-use articles and industrial products....
The Spec Of Extruder Manufacturers : The Twin Taper Screws Roller Head Extruder consists of two tapered screws and two rollers,The machine is normally applied for processing to a dispersion kneader or an intensive mixer. The rubber material,mixed by a dispersion kneader or an intensive mixer,is then fed to the rollers through the two tapered screws.It cal....
The Spec Of Extruder Manufacturers : *Products catalogues are available upon request.
*Various packaging options are available. *Please Contact Us.We shall proceed your request and you will receive our reply very soon. ....
The Spec Of Extruder Manufacturers : 35mm EXTRUDER NY-35
Founded in 1985 has morn than 27 years of experience, PIN YING is a leading provider in developping and manufacturing of plastic extruder included downstream machinery for profiles and pipes. And today, we are striving harder that for service of customers’demands. During long time experience, PIN....
The Spec Of Extruder Manufacturers : 1. Designed for T-shirt bag and flat bag production.
2. Small occupancy of space.
3. Simple, flexible and economic operation.
4. High output and saving energy.
5. Also can work with LDPE resin if changing inner ring.
6. Film thickness HDPE 0.008~0.06 mm.
The Spec Of Extruder Manufacturers : 1. Resin to be used: HD / LD / LLDPE.
2. Main product: HDPE / LDPE / LLDPE tubular film.
3. Width of film (mm): 900.
4. Thickness OD film: HDPE:0.008~0.12mm; HDPE / LLDPE:0.01~0.20mm.
5. MAX. extrusion output: 65. Extruder:
1. Type of extruder: low base type.
2. Main drive motor: AC30HP inverter. ....
The Spec Of Extruder Manufacturers : 1.Driving motor be controlled by inverter increasing 15% capacity.
2.In line designed, occupies little space, easy to operate, easy to manage.
3.Low electricity consumption, high-efficiency. 1.HDPE / LLDPE Excellent mixing capacity.2.Can integrate with printing device if necessary.3.Blown Film Extrusion Machine....
The Spec Of Extruder Manufacturers : 1. Model: Midi-40, Midi-45, Midi-45h, Midi-45l.
2. Raw material: Ldpe / lldpe / hdpe, Ldpe / lldpe / hdpe, Hdpe, Ldpe.
3. Screw design: mixing type screw with nitrided steel. 1. Screw dia: 40mm φ / 26d, 45mm φ / 26d, 45mm φ / 26d, 45mm φ / 26d.2. Extrusion output: 40 kgs/hr, 45 kgs/hr, 45 kgs/hr, ....
The Spec Of Extruder Manufacturers : For recycling pre-consumer (factory waste-remnants) clean soft/fluffy/light plastic, such as : HDPE,LDPE,LLDPE plastic bag, packaging film, PP film, PP rafia etc.
The Spec Of Extruder Manufacturers : 1. PVC formed profile extrusion line.
2. Electrical control panel:
(1) Type: independence type switch board.
(2) Temperature control: 4 points.
(3) Controller type: standard.
3. Vacuum forming calibrator:
(1) Water through ( mm ): water cooling system 1 set.
(2) Vacuum pump: 2 hp.
(3) Back / fore: 2 hp.
(4) U....
The Spec Of Extruder Manufacturers : Plastic extruding flat film stretching line (high speed):
Based on absorbing ab road advanced technology, this series of plastics flatfilm draw set is designed by ourselevs in accirdance with the domestic practical conditions of plastics weaving industry.
The specially designed screw cylinder of extruder is made ....
The Spec Of Extruder Manufacturers : The every kind of extrusion head was actuated by fully hydraulic power system for conveniently changing the dies and cleaning. 1. Model diameter: CE60-P, CE90-P, CE120-P, CE150-P, CE200-P, CE250-P.
2. Screw diameter (mm): 60, 90, 120, 150, 200, 250.
3. Screw (L/D): 10, 12, 14, 16, 18, 20.
4. Screw speed (r.p.m.)....
The Spec Of Extruder Manufacturers : 1. Suitable for PVC/PE extrusion line.
2. Electric wire & cable insulation, sheathing, stripping & skinning.
3. For single & two or three layers extrusion are available by using different extrusion head. Main composition:
1. Pay off stand.
2. Extrusion equipment (Including wheel stand of stretching line, extru....
The Spec Of Extruder Manufacturers : 3-layer co-extrusion line, can equip with:
1. Servo motor with inverter control.
2. IBC computer control system.
3. PIB pump system (for stretch film food wrapping).
4. Auto hopper loader.
5. Masterbatch dosing unit.
6. Pressure gauge (U.S.A made).
7. Gravimetric dosing unit (Germany made).
8. Line speed ....
The Spec Of Extruder Manufacturers : Product Name: Vertical Up-Down Winding Unit For the product specifications, please refer to our official website. ....
The Spec Of Extruder Manufacturers : Product Name: Back To Back Winding Unit For the product specifications, please refer to our official website. ....
The Spec Of Extruder Manufacturers : Product Name: Single Winding Unit For the product specifications, please refer to our official website. ....
The Spec Of Extruder Manufacturers : Product Name: Blowing Film Machinery
The Spec Of Extruder Manufacturers : Product Name: Blown Film Machine
The Spec Of Extruder Manufacturers : TPU film is environmentally friendly as it releases no toxins during decomposition. It is an excellent replacement for PVC. Finished products are wind proof and insulate internal warmth, feature high tensile strength, and resist ageing. TPU has a wide range of applications including water sport related products like wa....
The Spec Of Extruder Manufacturers : Multi-layer PET film is composed of two or more layers of co-extruded PET film. The multi-layer co-extruded compound die head design allows even distribution of all levels of melt in the die head after expansion, and prevents channeling between layers. Other functions include automatic monitor and control of material m....
The Spec Of Extruder Manufacturers : Presently PP sheet is the most widely used industrial material in the world. PP sheet is heat, wear, impact and corrosion resistant. PP sheet is generally used for acid proof anti-corrosion sheds, cold storage partitions, dust free plant engineering, and special storage facilities.
1.New design 2008, the Leader 800k....
