Select
The Spec Of Hydraulic Presses : HPS2500 (40 stations):
1. FANUC 18-PC CNC controller.
2. Hydraulic servo unit / power unit.
3. Auto index (2 d type 3-1/2").
4. Tool box with tool adjustment & maintenance tools.
5. 4 sets vibration prevented foot mountings.
6. Two pneumatic clamps.
7. 40 stations turret.
8. Punch assembling jig.
9. Scrap....
Select
The Spec Of Hydraulic Presses : 1. Electricity: 11.25 kw.
2. M/C cycle time: 10-15 sec / pc. 1. Dimension (L x W x H): 1000 x 1800 x 3120.
2. Weight (kgs): 2950. ....
Select
The Spec Of Hydraulic Presses : 1. WF67Y economical torsion synchronization press brake.
2. T Screw drives back gauge moving forward and backward.
3. Integrated hydraulic system of domestic famous brand.
4. Clip-and-sleeve oil pipe and joint.
5. SCHNEIDER key electrics.
6. ACL special-purpose digital display system.
7. Imported two-layer seals ....
Select
The Spec Of Hydraulic Presses : 1. Hollow piston rods.
2. Manufacture course the same as hard chromium piston rod, it lighter than piston rod weight and higher strength, making it less prone to bending, and can be used as the reflow pipe. 1. External diameter accuracy: f8.
2. Surface roughness: Ra 0.2μm ~ Ra 0.4μm.
3. Surface hardness: HV 80....
Select
The Spec Of Hydraulic Presses : 1. Side oil tank cover.
2. Rubber coupling.
3. Coupling. 1. Strainers & filtration: AMF-0.105 mm, AFW-0.105 mm, AFN-0.12 mm.
2. Oil breathers: AHS-1162, AHS-1163, AS-1163S.
3. Oil level indicators with thermometer.
4. Gauge cocks.
5. Glycerine pressure gauge model: AW-2 1/2", 4" AI-2 1/2", 4&qu....
Select
The Spec Of Hydraulic Presses : 1. Hydraulic cylinder coolant collectors.
2. Compact and lightweight, they feature bore sizes up to 20% large then conventional cylinders. Precision finished piston bores and cool running rotary unions are included for trouble-free preformance. 1. Model\dim: CM10B
A: 118.
B: 75.
C: 42.
D: 84.
E: 131.
F:....
Select
The Spec Of Hydraulic Presses : 1. Power: 7.5 hp.
2. Max. ctting ht: 800 mm.
3. Max. ctting width: 1000 mm. 1. Max. otput: 1500 kgs.
2. Machine weight: 1400 kgs.
3. Macine size: 400 x 800 x 3200 mm. ....
Select
The Spec Of Hydraulic Presses : 1. This machine is designed of double column structure which can be resisted big pressure, Especially, the molding plate & pressure can be changed as necessary, long servicing life and high tension resistance.
2. Adopted hi-pressure hydraulic Action system & electronic circuiting, shorting of pressing time, good of f....
Select
The Spec Of Hydraulic Presses : 1. Adoption of high efficiency pilot valve.
2. Easy arrangement for pilot and drain method.
3. Based on ISO standards, interchangeable with other makers. 1. Nominal dia: 3/4''.
2. Maxi. pressure: 210 kgf/cm².
3. Maxi. flow (l/min): 300 (3C:150).
4. Pilot pressure: 4.5-210 kgf/cm².
5. Allowable back pressure....
Select
The Spec Of Hydraulic Presses : 1. The highest temperature can reach to 150℃ x 70hr and still maintain good performance.
2. The lowest temperature can reach to -55℃ x 22hr and still maintain good performance.
3. Customer dimension and design mold inquiry is acceptable. 1. ASTMD2000 M2DA714 A26 EA14.
2. Our specially compounded elastomer p....
Select
The Spec Of Hydraulic Presses : Lathe Special Machine / KT-25B Hydraulic Lathe:
1. Improving the performance of screwdriver machines to fit the customers’ needs.
2. Quality is a hallmark of our products.
3. Every screwdriver machine has to be inspected strictly before delivery to ensure its high quality and perfection. 1. Workpiece diameter....
Select
The Spec Of Hydraulic Presses : H-frame hydraulic press ych series. 1. Capacity: 10T~300 tons.
2. Table: 550x425~1000x800 mm.
3. Stroke: 300-600 mm. ....
Select
The Spec Of Hydraulic Presses : No mater what the kind of sanding application, Chin Chao Sheng can provide the machines that fully meet your requirements. We have the resources to design the machine to suit your rigorous requirements. 1. Platform size: 1220 x 2440, 1220 x 2700, 1525 x 2400, 1525 x 2700.
2. Thickness of materials: 18 x 30, 18 x ....
Select
The Spec Of Hydraulic Presses : 2/2 way brass direct acting solenoid valves: ow starting pressure 0.5kgf/c㎡. Suitable for large flow rate and higher pressure. Stainless steel armature provides exceptional durability. Flange and ex-proof coil T4 are optional. Please install horizontally 1. Model: PU225A-03, PU225A-04, PU225A-06, PU225A-08, PU225....
Select
The Spec Of Hydraulic Presses : 1. Normally closed. Screwed end.
2. For steam, air, heavy oil, water. Mit-UNid-cns brand or UNi-d brand. Mit-UNid-cns brand or UNi-d brand:
1. BSPT, NPT, BSP. AC 110v/220v, dc 24v.
2. Size: 1/2”~2”.
3. Press: 0.5-15 kgf/cm2.
4. US series is multiplex-drive, piston guide, and conductive normal close.
5. Va....
Select
The Spec Of Hydraulic Presses : 1. Put bags to the balcony and press bags into a fixed volume.
2. The smaller volume bags easy to packet.
3. High tons can press to smaller volume. 1. Press capacity: 20 tons.
2. Size of table: 1300 x 1000 mm.
3. Open height: 1200 mm.
4. Stroke: 1200 mm.
5. Operation speed down: 1300 mm/minute.
6. Oper....
Select
The Spec Of Hydraulic Presses : 1. Strong power- this punching machine is operated by hydraulic pressure.
2. Easy time setting- with timer which is different from conventional method.
3. Low noise hydraulic press punching-Do not need to bear the noise from cam press punching.
4. With foot switch for operation convenience. Save time and increase....
Select
The Spec Of Hydraulic Presses : 1. Hydraulic cone crusher is new generation cone of CMC, with advantages of simple construction , easy operation / maintenance and high capacity.
2. It is very suitable for the labor shortage modern industry.
3. Compared with traditional spring cone crusher.
4. It is fully hydraulic so the discharge set can be ad....
Select
The Spec Of Hydraulic Presses : 1. Cutting capacity (H x D):
(1) 600 x 1500mm (23.6" x 59").
(2) min.clamp width 500mm(19.6").
2. Blade speed: 15-70 m/min (50-250fpm).
3. Motors:
(1) Blade: 5.5kw (7.5 HP ).
(2) Hydraulic: 2.2kw (3HP).
(3) Coolant: 0.6kw (3/4HP).
(4) Auto chip conveyor (optional): 0.4kw (1/2HP) (optiona....
Select
The Spec Of Hydraulic Presses : Fulong company is experienced in the manufacture of special purpose or large oil hydraulic cylinder blocks. We can produce any sizes and styles as your requests, welcome OEM & ODM. ....
Select
The Spec Of Hydraulic Presses : 1. With solenoid valve.
2. Precision needle valve. Chrome plating. ....
Select
The Spec Of Hydraulic Presses : 1. Hydraulic system with logical circuit control which stabilizes pressure and product's quality.
2. Adopt microcomputer control which enables to operate easily.
3. Two in & two out heating plate make hot and cooling faster and make temperature average.
4. High capacity production and faster.
5. Automatic feeder....
Select
The Spec Of Hydraulic Presses : Compaact hydraulic block.
Overload protection valves.
Push botton operation.
Preset blaing height table auto stop.
Pressure regulator & gauge.
Emergency stop. Capacity :60 Tons
Driving Motor :10 Hp x 6P
Hydraulic Cylinder diameter: 180 mm
Hydraulic Cylinder Stroke:1100 mm
Open Height :1300 mm
Operation S....
Select
The Spec Of Hydraulic Presses : 1. Filter, regulator.
2. Specializing and manufacturing in both producing pneumatic tools & accessories.
3. Offering the most suitable tools to make easy and efficient your work.
4. Offers comprehensive tool selections to meet the demand of today's professional users. 1. Port size: 1/8".
2. Filtering grade....
Select
The Spec Of Hydraulic Presses : 1. Large through hole super thin hollow rotary hydraulic cylinder.
2. Super thin & lightweight: super thin outer structure makes the weight lighter than the traditional rotary cylinders; meanwhile, the compactness and miniaturization lower the burden of machines.
3. Large thru-hole diameter: with large open center, ....
Select
The Spec Of Hydraulic Presses : 1. Design features:
(1) Metal-to-metal diaphragm seals.
(2) Inlet and outlet ports: 1/4" NPT (F).
(3) Easy panel and base mounting.
2. Typical applications:
(1) Manifold systems.
(2) Petroleum industry. ....
Select
The Spec Of Hydraulic Presses : SY-RF103B hydraulic type iron case of oil seals side roll forming & combining machine.
1. Application: suitable for iron case of oil seals side roll forming and combining.
2. Feature: high speed location, low speed side roll forming and combining. 1. Power: clutch motor(air power)2HP+ oil press unit 2HP.
2. Volt....
Select
The Spec Of Hydraulic Presses : 1. Offering comprehensive range of machinery.
2. Any special request will be welcome, either by e-mail or fax message.
3. It is our ultimate goal to supply quality products with timely delivery and efficiency services to satisfactory our customers. Capacity: 100 ton-1500 ton. ....
Select
The Spec Of Hydraulic Presses : 1. Application: for creasing folding line on PP stationery file.
2. Feature: adjustable melting temperature as varied with working requirement, maximum temperature up to 600ºC. 1. Model: HC-5TRHA.
2. Maximum workpiece size: 800(L) x 420(W) mm.
3. Height from floor to table: 850 mm.
4. Hydraulic oil: 11 lit....
Select
The Spec Of Hydraulic Presses : Production description: Ø6~Ø30mm x free length. Custom are accepted. ....