The Spec Of Industrial Commercial Machinery Equipment : 1. 2 stacks mould with rolling device.
2. Dies can be made by request to match present specification.
3. Offering special spec of bending die, wiper die, multi-direction mandrel.
4. Available for 1000 programs and can stored 28 bending data per program.
5. Both functions of bending and rolling.
6. Capacity of roll....
The Spec Of Industrial Commercial Machinery Equipment : 5 Feet slitting line could manufacture products for thickness: 0.3 - 3.0mm and width: 300-1600mm.
The Spec Of Industrial Commercial Machinery Equipment : It processes all kinds of sheets to be box/ panshape. The maximum advantage is that it abopts foot power impacting top beam equipment. So you can shift sheets directly by hand, theprocessing veracity is high. The equalizer is set under the machine to reduce accidents.
The Spec Of Industrial Commercial Machinery Equipment : 1. Full automatic Forming for Motorcycle Rim from material feeding until rim cutting.
2. Application for A-type (big wheel-spoke/nipple type) motorcycle rim (OD) 16" - 18" x 45w~70w x (t.)1.2mm~1.83mm.
3. 2 models : Separated 18 forming roller sets Quick-change-mold 19 forming roller sets.
The Spec Of Industrial Commercial Machinery Equipment : Every wire harness is produced by Gamma 333PC fully automatic crimping machine according to IPC-A-620 workmanship standard and assembled together according to customers' specifications. 100% electrical test is provided on function, short and open circuit, hi-pot and insulation resistance.
The Spec Of Industrial Commercial Machinery Equipment : The Auto chain link fencing machine is to produce chain link mesh fabric for fencing purpose. It's is widely used today in places like home fences, basketball courts, tennis courts, school zones, parks, industrial area, companies, swimming pool, and more.
The Spec Of Industrial Commercial Machinery Equipment : 1. Introduction:
A capacitor after winding, heat stabilizing and end spraying often be a short circuit. Clearing is achieved by applying a voltage across the capacitor so that sufficient current can flow to clear the short without allowing too much to flow and so damage the end connection.
2. Feature:
(1) Automatic ....
The Spec Of Industrial Commercial Machinery Equipment : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
The Spec Of Industrial Commercial Machinery Equipment : 1. 12KG grinding capacity.
2. Max. processing capacity (reference value):
(1) 12kg: copper, stainless steel, aluminum, zinc(non-magnetic material).
(2) 5kg: iron, steel, stainless steel (magnetic material).
3. Weight:
(1) Stainless pins/12KG(standard dimension).
(2) Plastic container/2 set.
(3) Separating conta....
The Spec Of Industrial Commercial Machinery Equipment : 1.CE certified.
2.High production rate of 500-700 pcs/min.
3.Automatic product counting.
Product quantity pre-set. Once the pre-set value is reached.
The alarm will sound, allowing added convenience for quantity packing into bags.
4.Movable emergency stop.
5.Automatic machine stop in the event of straw ja....
The Spec Of Industrial Commercial Machinery Equipment : 1. Besides nose type headstock, the quill system ensures a good accessibility to the work.
VAC motor driver for spindle continuously adjust the spindle rotational speed even during the cutting operation, so that best cutting conditions can be readily obtained.
The multi-drive system of one motor/axis for each feed ....
The Spec Of Industrial Commercial Machinery Equipment : 1. For tap: M3~M22.
2. Speed: 120/300RPM.
3. Work range RMAX: 950mm, RMIN 100mm.
The Spec Of Industrial Commercial Machinery Equipment : 1. Applications: mainly used for conveying of oxygen gases for welding and cutting equipment.
2. Tube: NR & SBR synthetic rubber, black color.
3. Reinforcement: high tensile synthetic yarn braided or spiraled.
4. Cover: NR & SBR synthetic rubber, red and blue in colors, etc.
5. Characteristics: abrasion resistant, ....
The Spec Of Industrial Commercial Machinery Equipment : 1. Grinding capacity: 660 x 127 x 15.8 mm.
2. Grinding power: 2 hp.
3. Grinding wheel size: 150 x 100 x 25.4 mm.
The Spec Of Industrial Commercial Machinery Equipment : 1. User-friendly PC based control combined with touch screen monitor for maximum operation convenience.
2. The printing head is raised vertically for convenient access to screen and squeegee.
3. Vacuum suction table for efficient workpiece fixing, with blow back function.
4. The squeegee mechanism has a pressure sta....
The Spec Of Industrial Commercial Machinery Equipment : The machine is used mainly for drawing different sizes of stainless steel round pipe, square pipe, and rectangular pipe.
Application: industry, construction, furniture, medical use, etc.
1. Our machines are manufactured from finest materials. Steady, durable and long life.
2. Automatic control, easy to operate, ....
The Spec Of Industrial Commercial Machinery Equipment : Stainless Steel Pipe warehouses.
The Spec Of Industrial Commercial Machinery Equipment : In this extremely competitive and recommend the environmental protection concept era. The only sure way to improve the profit margin is to maximize efficiency and minimize production waste, and simultaneously to improve the product quality.
However, all the automatic starch kitchens on the market can only make Stein-H....
The Spec Of Industrial Commercial Machinery Equipment : 1. Table:
(1) Working surface:
a. 1300 x 300mm.
b. (Optional) 1500 x 300mm.
(2) Travel longitudinal x cross x vertical:
a. 950 x 320 x 470mm.
b. (Optional) 1050 x 320 x 470mm.
(3) T-slot (wide x no.x pitch): 16mm x 3 x 70mm.
(4) Feeds 12 steps:
a. Longitudinal x cross (60Hz): 13~621mm/min.
b. Longitud....
The Spec Of Industrial Commercial Machinery Equipment : 1. Pass the highest quailty restriction.
2. Provide all kinds of services after the automatic CNC lathe machine has been sold.
The Spec Of Industrial Commercial Machinery Equipment : 1. Easy operation & maintenance.
2. Excellent spray fan & finest atomization.
3. High performance.
The Spec Of Industrial Commercial Machinery Equipment : Features: hydraulic average force, diaphragm style gluing provides a better glue applying control and adjustment. Easy to operate.
The Spec Of Industrial Commercial Machinery Equipment : 1. Instance: apply the label on the top or one side of plane productworking alone or with production line.
2. Features:
(1) Labeling applicator designed compact and versatile.
(2) User-friendly and minimal change parts..
(3) High precision ± 1 mm.
(4) Labeling speed up to 120 pieces per minute.
(5) Automatic rec....
The Spec Of Industrial Commercial Machinery Equipment : 1. The sub-spindle is suitable for back side machining which saves time in secondary machining.
2. The sub-spindle accommodates a 6" 3-jaw chuck or a collet chuck.
3. The two-spindle series feature high spindle speed,fine precision and excellent efficiency.
4. 12-position turret.
The Spec Of Industrial Commercial Machinery Equipment : Power crushing machine A-series is foundation equipment in recycling industry, it has senior excellent quality component of machinery. The best design for the cutting angel, easy to replace the blade, easy to clean material, fast to change the sieve, humanity operation design, pretty shape and so on. The structure of m....
The Spec Of Industrial Commercial Machinery Equipment : 1. Usages:
DJ-VHA100, DJ-VHA160, DJ-VHA260, DJ-VHA510, DJ-VHA910 and DJ-VHA1500 are suitable for wrenches, auto parts, electrical anchor, valves and screws, machine parts, hand tools, big size bolts & nuts, and various hot forging parts.
2. Features:
It can save material and energy up to 50%. It is easy to operat....
The Spec Of Industrial Commercial Machinery Equipment : 1. With strict quality control, best performance, durable and little breakdown rate.
2. Sound is slight during running, no vibration and to install underground screws not required.
3. Through special design which is studied and improved for years, the easy operation goes with automatic control in high efficiency.
4....
The Spec Of Industrial Commercial Machinery Equipment : 1. X 1300mm (51.2")/Y 650mm (25.6")/Z 650mm (25.6").
2. 24 tool magazine (BT-50, CAT-40).
3. 6,000 RPM spindle speed.
The Spec Of Industrial Commercial Machinery Equipment : 1. 280mm (11") swing over bed.
2. 457mm (18") distance between centers.
3. Dual range inch/metric quick change gearbox.
4. Infinitely variable spindle speeds from 0-4000 RPM
5. Full bearing carriage with turcite-b slideway bearing material between carriage and bed.
6. The spindle is mounted in high ....
The Spec Of Industrial Commercial Machinery Equipment : The width of mesh is adjustable. After coiling, the mesh is flat and don't need to be corrected by manual. However, if the cross wires are not straight, it will make mesh uneven.
