The Spec Of Lubricating Equipments : 1. It is tested and verified by TUV Rheinland in Taiwan and had \ passed CE of Machinery Safety Directive (MSD 89/392/EEC) and Low voltage directive (LVD 73/23/EEC).
2. It conforms to UN's requirement of necessary safety, hygienic regulation.
3. It is without timer (also could be controlled by programmable Logic Con....
The Spec Of Lubricating Equipments : 1. The operation and interval time is without timer.
2. The discharge volume is stable and can be adjusted by the pressure-regulating valve. Turning the valve clockwise, the oil volume will increase, and turning anticlockwise, the oil volume will reduce.
3. It used a high quality alloy steel gear pump ....
The Spec Of Lubricating Equipments : 1. The standard of CESH type, operation time is 10 sec fixed, and interval time is 1-60 min or 1-180 min optional.
2. The electronic box has operation indicator and interval indicator. Two types of this CESH series, CESH Turn On-Feeding Type and CESH Turn On-Interval Type, both could automatically save the original o....
The Spec Of Lubricating Equipments : 1. It is tested and verified by TUV Rheinland in Taiwan and had passed CE of Machinery Safety Directive (MSD 89/392/EEC) and Low Voltage Directive (LVD 73/23/EEC). It conforms to UN's requirement of "Necessary Safety, Hygienic Regulation."
2. CESA/B and CESMB series of products have been proved ISO9001 by th....
The Spec Of Lubricating Equipments : 1. It is tested and verified by TUV Rheinland in Taiwan and had passed CE of Machinery Safety Directive (MSD 9/392/EEC) and Low Voltage Directive (LVD 73/23/EEC). It conforms to UN's requirement of
"Necessary Safety, Hygienic Regulation."
2. It is without timer (also could be controlled by Programmable Logi....
The Spec Of Lubricating Equipments : 1. The discharge volume of is fixed.
2. CLAB is the only one manual type of pressure-relief type lubricators. It has to work with volume distributors.
3. CLAB is low coat, high prcticality.
4. Easy to operate by using the handle to feed oil.
5. Small size and easy to install.
6. It is divided by the volume of con....
The Spec Of Lubricating Equipments : 1. The discharge volume of is fixed.
2. CLAB is the only one manual type of pressure-relief type lubricators. It has to work with volume distributors.
3. CLAB is low coat, high prcticality.
4. Easy to operate by using the handle to feed oil.
5. Small size and easy to install.
6. It is divided by the volume of con....
The Spec Of Lubricating Equipments : 1. It has Taiwanese Patent No. 157504, Chinese Patent No.
ZL02200902.7 and Japanese Patent No. 3016033.
2. It is tested and verified by TUV Rheinland in Taiwan and had passed
ce of machinery safety directive (MSD 89/392/EEC) and low voltage directive (LVD 73/23/EEC). It conforms to UN's requireme....
The Spec Of Lubricating Equipments : 1. The time adjuster of CESW is outside the wire box. The electronic box has operation indicator and interval time indicator.
2. Two types of this CESW series, Turn On-Feeding Type will feed oil after turning on the power. Turn On-Interval Type will be interval after turning on the power and this type can memorize th....
The Spec Of Lubricating Equipments : 1. It is tested and verified by TUV Rheinland in Taiwan and had passed CE of Machinery Safety Directive (MSD 89/392/EEC) and Low Voltage Directive (LVD 73/23/EEC). It conforms to UN's requirement of "Necessary Safety, Hygienic Regulation."
2. The timer controls the operation and interval time. The electronic....
The Spec Of Lubricating Equipments : 1. CESG-01 type is without timer (also could be controlled by Programmable Logic Controller) and can work with many kinds of open distributors and proportion adapters.
2. It has a float switch that can detect the volume of oil. It will have continuous signal automatically when the oil level is lower than the standard....
The Spec Of Lubricating Equipments : 1. This is circulating lubricator, which means the oil flows out, then comes back into the oil tank through the cyclic inlet, thus could save the usage volume of oil. The cyclic inlet has magnetic filter, which can block the impurities and assure the oil clean.
2. CEH type could be controlled by PLC (Programmable Logi....
The Spec Of Lubricating Equipments : 1. This is circulating lubricator, which means the oil flows out, then comes back into the oil tank through the cyclic inlet, thus could save the usage volume of oil. The cyclic inlet has magnetic filter, which can block the impurities and assure the oil clean.
2. It used a high quality pump that not only has steady o....
The Spec Of Lubricating Equipments : 1. COA type is a kind of pressure-relief type electric lubricator, has to work with CO or OA type oil-air volume distributors.
2. The feature of CO and OA type oil-air volume distributors is "The discharge volume is fixed". And CO type has fixed amount of air, OA type can adjust the amount of air.
The Spec Of Lubricating Equipments : PNA type is resistance type, doesn't pressure-relief device, and the discharge volume is 0~8cc/stroke adjustable. Turn the knob clockwise, and the volume is larger; turn it anti-clockwise, and the volume is smaller.
The Spec Of Lubricating Equipments : CLHA-25 is a new product and has to work with grease tube(400cc), which is easier to operate and keep clean. It conforms to UN's requirement of "necessary safety, hygienic regulation."
The Spec Of Lubricating Equipments : 1. KSBP-40 type has hard springs, and t he suitable viscosity of grease is NLGI grades 000 to 2.
2. KSBP-40 type has a timer to control the operation and interval time, there is also KSCP-40 type, which could be controlled by PLC.
3. It has a pressure gauge for checking if the pressure is normal.
The Spec Of Lubricating Equipments : PNB type has pressure-relief device, and the discharge volume is fixed. PNB type needs to work with volume distributors, with CAB or CBB type distributor, oil will feed during operation time. With CDB or T type distributor, oil will feed during interval time.
The Spec Of Lubricating Equipments : 1. Fixed amount of oil feeding. The lubrication points of volume distributor supply a fixed flow of lubricant.
2. The standards are assembled detective piston, which can observe if operation is normal.
The Spec Of Lubricating Equipments : 1. CLHP-40 has a hard spring inside that is suitable for NLGI grades 000 to 2.
2. Recommend to work with CV type progressive feeders to control the discharge volume.
3. Easy to operate by handling the grip for feeding oil repeatedly.
4. It is suitable for the machinery that does not need to feed oil at certain time.....
