Select
The Spec Of Metal Cutting Machines : 1. The radial drill arm adopts IC timer with advantage of one bottom press, it can automatically release up and vertical down, stop, and automatically clamping easy to operate. The spindle can still maintain in original set after the tools change.
2. Exclusively for gears type cycling oil pump is furnished to cool of....
Select
The Spec Of Metal Cutting Machines : 1. 2 stacks mould with rolling device.
2. Dies can be made by request to match present specification.
3. Offering special spec of bending die, wiper die, multi-direction mandrel.
4. Available for 1000 programs and can stored 28 bending data per program.
5. Both functions of bending and rolling.
6. Capacity of roll....
Select
The Spec Of Metal Cutting Machines : It processes all kinds of sheets to be box/ panshape. The maximum advantage is that it abopts foot power impacting top beam equipment. So you can shift sheets directly by hand, theprocessing veracity is high. The equalizer is set under the machine to reduce accidents. 1. Working length: 1260mm.
2. Folding capacity....
Select
The Spec Of Metal Cutting Machines : 1. Into force: 240W.
2. Current: 2.5A.
3. No-load speed: 23000rpm.
4. Diameter of main spindle ring: 35mm.
5. Diameter of grinding wheel: 25mm. 1. Max diameter of sleeves: 6mm.
2. Cable length: 2.5M.
3. Insulation level: class E. ....
Select
The Spec Of Metal Cutting Machines : CNC high-speed twin stations hot-stamping & die-cut machine:
300 rpm (imp/min) super high speed off-line or 250 rpm (imp/min) on-line with SPM-340LR: shaftless letterpress full / intermittent rotary printing machine. 1. Max. web width: 340 mm.
2. Max. die-cut (hot stamping) area: 330(L) x 310(W).
3. Max. spee....
Select
The Spec Of Metal Cutting Machines : 1. We offer waterjet cutting service.
2. Our workshop has OMAX waterjet cutting machine model 55100, which provide professional, precise and fast waterjet cutting service.
3. OMAX 55100 jetmachining center.
4. Precision machining workhorse: from prototypes to production runs, create parts in a variety of materials i....
Select
The Spec Of Metal Cutting Machines : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
Select
The Spec Of Metal Cutting Machines : 1. The new SOCO SA-76NC cutting machine brings you the latest technology in tube cutting systems. Equipped with a 6.5/8.5/12.5 meters BTM (bundle loading magazine) and a 2 / 3 / 4.5 meters output gate, the SA-76NC offers unparalleled sawing output for tubes and pipes.
2. Together with SOCO control system, Touch Scree....
Select
The Spec Of Metal Cutting Machines : The A-series has the highest cutting tool capacity and is built for extremely intricate processing. The high speed spindle is ideal for cavity machining and precision engraving. Fully automatic full rotation, high speed, high precision. 1. Spindle speed 60~10000 rpm (STD).
2. Spindle speed 60~15000 rpm (OPT).
3....
Select
The Spec Of Metal Cutting Machines : 1. Soft jaw for hydraulic chuck.
2. Soft jaw for CNC lathe. 1.Model\dim: HC 05
C-1: 62.
C-2: 25.
C-3: 30.
C-4: 10.
C-5: 4.
C-6: 9.
C-7: 14.
C-8: 39.
2.Model\dim: HC 06
C-1: 73.
C-2: 32.
C-3: 36.
C-4: 12.
C-5: 6.
C-6: 15.
C-7: 20.
C-8: 38.
3.Model\dim: HC 08
C-1: 95.
C-2: 35. ....
Select
The Spec Of Metal Cutting Machines : 1. High precision and high rigidity.
2. High efficiency.
3. Single piece base casting.
4. Longitudinal mechanism.
5. CNC control. 1. Max. grinding length: 500 mm (20").
2. Max. grinding width: 250 mm (10").
3. Table working surface: 250x500 mm (10"x20").
4. Max. distance from table surfac....
Select
The Spec Of Metal Cutting Machines : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
1. Adjustable clamping height.
2. Adjustable cutting speed. The operator may adjust clamping height and speed and cutting heigh....
Select
The Spec Of Metal Cutting Machines : It fits in working big workpieces of molding drilling field and fits in column NC drilling. The working table can take heavy weight and big size of mold and it is suitable for making the cooling holes and pin holes in the mold. The spindle is stepless when the gundrilling is working and it is the most efficiency machin....
Select
The Spec Of Metal Cutting Machines : 1. Travel: 850 x 550 x 600 mm.
2. Spindle: BT-40.
3. Belt spindle: 8000-10000 rpm.
4. Direct spindle: 12000-15000 rpm.
5. Build-in spindle: 20000 rpm.
6. Gear spindle: 4500-6000 rpm. 1.Table:
(1) Table size (mm): 1050x550.
(2) Max. load on table (kg): 850.
2. Travel:
(1) XYZ travel (mm): 850x550x600.
(2)....
Select
The Spec Of Metal Cutting Machines : 1. Grinding capacity: 660 x 127 x 15.8 mm.
2. Grinding power: 2 hp.
3. Grinding wheel size: 150 x 100 x 25.4 mm. 1. Machine size: 1120 x 860 x 960 mm.
2. Machine weight: 280 kgs. ....
Select
The Spec Of Metal Cutting Machines : 1. Fully digital package control to provide high accuracy & high reliability.
2. Massive meehanite cast iron for rigidity.
3. Turcite surfaces + Hardened/ground slide way.
4. Auto power off. 1. X-Y-Z-Travel: 1650 x 750 x 650mm.
2. Table size: 600 mm x 1800 mm.
3. Siemens 802D control easy-to-operate and progr....
Select
The Spec Of Metal Cutting Machines : 1. Apply linear slide rails to the X-axis, Y-axis, Z-axis, in combination with servo motor drive, the accurate locating and the slow feeding grinding could be achieved.
2. Servo motor control, it could discretionary sets out the teeth number and the feeding load.
3. Single-mere program, a one-shot single-mere simul....
Select
The Spec Of Metal Cutting Machines : Features:
This machine is suitable for cowhide, pighide, EVA & rubber sole etc., making grind roughen and convenient for cementing. 1. Model: YU-226
2. Power: 3HP
3. Machine size m/m: 1210x730x1400mm
4. Measurement m/m: 1310x830x1500mm
5. N.W./G.W. : 280kgs/370kgs ....
Select
The Spec Of Metal Cutting Machines : 1. Travel:
(1) X-axis travel: 2000, 3000(opt)mm.
(2) Y-axis travel: 1500mm.
(3) Z-axis travel: 1500mm.
(4) W-axis travel: 550mm.
(5) Spindle center to table top: 0~1500mm.
(6) Spindle nose to table center: -130~1055mm.
2. Table:
(1) Table size: 1200 x 1500mm.
(2) T slot (wide x no .x pitch): 22H8 x 7 x ....
Select
The Spec Of Metal Cutting Machines : 1. Precision, rigid spindle: the grinding wheel spindle is supported by two special hydrodynamic bearings on the ends with five-point support, providing maximum rigidity and stability of spindle running. In case insufficient lubrication oil occurs, the spindle stops automatically to avoid wearing on the spindle and bea....
Select
The Spec Of Metal Cutting Machines : 1. Pass the highest quailty restriction.
2. Provide all kinds of services after the automatic CNC lathe machine has been sold. 1. Swing over bed: 960.
2. Swing over cross slide: 560.
3. Distance between centers: 2000(80"), 3000(120"), 4000(160"), 5000(200"),6000(240").
4. Bed width: 560....
Select
The Spec Of Metal Cutting Machines : 1. Description:
(1) Unsurprssed high speed.
(2) High performance and high precision.
2. Features:
(1) Swing over bed ø 450mm.
(2) Max. turning diameter ø 250mm.
(3) Max. turning length ø 600mm.
(4) Choice of 8, 12, 23 station turret or power turret.
(5) Modular design provides variety of options for cost e....
Select
The Spec Of Metal Cutting Machines : Sequence of operation machine:
Capacitor feeding, lead pressing, lead straightening, forming, capacitence, tan-df and lead forming check, spare station, cutter, counting. 1. M/C dimensions: L1550 x W850 x H1730(mm).
2. Weight: 400kgs.
3. Power: AC220V 1Ø50/60Hz 3KW.
4. Air: 4~5kg/c㎡.
5. Productivity: 40~90p....
Select
The Spec Of Metal Cutting Machines : The main service items are spring equipments for vehicles, such as spring machines, spring end grinding machines and peripherals.
Fully support various requirements of our customers. 1. Wire capacity (mm): ø2-ø5.
2. Length detector: no.
3. Max.spring OD.: ø80mm.
4. Spring length: 20-200mm.
5. Power cons....
Select
The Spec Of Metal Cutting Machines : Production expands the metal network, for instance: fhombus network, hexagon network, special design network, etc. 1. Applicable material thickness: 0.5~8.0T mm max.
2. Mesh: 2~40mm (SW) x 4~136mm (LW) max.
3. Applicable material width: 2460mm max.
4. Operation area space: approximately 6 M x 10 M.
5. Applicabl....
Select
The Spec Of Metal Cutting Machines : Power crushing machine A-series is foundation equipment in recycling industry, it has senior excellent quality component of machinery. The best design for the cutting angel, easy to replace the blade, easy to clean material, fast to change the sieve, humanity operation design, pretty shape and so on. The structure of m....
Select
The Spec Of Metal Cutting Machines : 1. The sub-spindle is suitable for back side machining which saves time in secondary machining.
2. The sub-spindle accommodates a 6" 3-jaw chuck or a collet chuck.
3. The two-spindle series feature high spindle speed,fine precision and excellent efficiency.
4. 12-position turret. 1. Max. swing over bed: 320....
Select
The Spec Of Metal Cutting Machines : 1. Air tapping spindle.
2. Parallel arm.
3. Choose any six safety clutch tapping adapters.
4. Radial jib, increases arm reach by 500mm.
5. Table mounting column.
6. Air unit. 1. For tap: M2-M8.
2. Speed: 700RPM.
3. Work range: Rma1900mm, Rmin200mm. ....
Select
The Spec Of Metal Cutting Machines : 1. Single central positioned spindle (fixed), with two turrets and twin CNC control system. Twin turret can operate simultaneously and carry out different cutting on each ends.
2. Shaft, rod or tubes both ends cutting (O.D. or I.D.) are carried out simultaneously to obtain very high concentricity and efficiency.
Sp....
Select
The Spec Of Metal Cutting Machines : 1. Compact construction, easy mobility and low cost.
2. Easy to operate.
3. Good for drilling start holes for wire cut EDM.
4. Good for deep hole drilling on super hard alloy and powder metallurgical steel materials.
5. Designed for small, large and irregularly shaped material fine hole drilling.
6. Suitable f....