The Spec Of Power Chuck : 2-Jaw high speed hollow power chucks, it's suitable for CNC lathe and the forth axes:
1. High speed.
2. It's gripped through hydraulic power and strong clamping force.
3. It can be matched with bar feeder and bar stopper with its hollow design.
4. Hard jaws and Soft jaws are interchangeable with those of power chuc....
The Spec Of Power Chuck : Acting precisely and no vibration. Endurable and strong mechanism. SUS440C gripper provides a long life of product. Aluminum alloy body with hard anodizing for high wear-resistance and anti-corrosion. 1. Bore size: Ø16, Ø20.
2. Port size: M5 x 0.8P.
3. Gripper gap distance, wide type: open: 22mm, close: 14mm, o....
The Spec Of Power Chuck : 1. Suitable for vertical milling and dritting operations.
2. With large throagh-hole, Vertical / horizontal power chucks not only can glip the long workpiece bat also can do horizontal holding. 6" Vertical DOV
1. Piston dia (mm): Ø 115.
2. Piaron area: push side (cm²): 104.
3. Piaron area: pull side (cmÂ....
The Spec Of Power Chuck : 4-Jaw high speed hollow power chucks, it's suitable for CNC lathe and the forth axes:
1. High speed.
2. It's gripped through hydraulic power and strong clamping force.
3. It can be matched with bar feeder and bar stopper with its hollow design.
4. Hard jaws and Soft jaws are interchangeable with those of po....
The Spec Of Power Chuck : 3-Jaw high speed hollow power chucks, it's suitable for CNC lathe and the forth axes:
1. High speed.
2. It's gripped through hydraulic power and strong clamping force.
3. It can be matched with bar feeder and bar stopper with its hollow design.
4. Hard jaws and Soft jaws are interchangeable with those of power chuc....
The Spec Of Power Chuck : 1. It's suitable for CNC lathe.
2. It's gripped by hydraulic power and strong clamping force.
3. Large through hole.
4. High speed. 1. Model: OPB-206, OPB-208, OPB-210.
2. Please refer to an attachment. ....
The Spec Of Power Chuck : Pull back feature of radial gripping will lead to almost no work piece uplifting displacement; CHANDOX pull back power chucks are ideal for machining casting and forging parts.
1. By appressing the gripping work piece to the surface, CHANDOX pull back power chucks are suitable for heavy machining.
2. Chuck actuators ....
The Spec Of Power Chuck : 1.It's suitable for CNC lathe and special purpose machines.
2. It can be gripped through hydraulic power and strong clamping force.
3. High speed. 1. Model: CLT-06, CLT-08, CLT-10, CLT-12.
2. Please refer to an attachment. ....
The Spec Of Power Chuck : 1.It's suitable for CNC lathe and special purpose machines.
2. It can be gripped through hydraulic power and strong clamping force.
3. High speed. 1. Model: CL-05, CL-06, CL-08, CL-10, CL-12, CL-15, CL-18, CL-21, CL-24.
2. Please refer to an attachment. ....
The Spec Of Power Chuck : 1. With built-in type cylinder, it is ideal for machining application on working table.
2. Rust-proof for Pneumatic Cylinder: inside wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
3. Dusts-proof and waterproof: dust-proof and wate....
The Spec Of Power Chuck : 1. With built-in type cylinder, it is ideal for machining application on working table.
2. Rust-proof for pneumatic cylinder: inside wall of cylinder being rustproof treated; cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
3. Dusts-proof and waterproof: dust-proof and wate....
The Spec Of Power Chuck : It's suitable for PL series chucks. 1. Model: S-06, S-08, S-10, S-12.
2. Please refer to an attachment. ....
The Spec Of Power Chuck : 1. More large bore : having the largest bore in wede type power operated chucks.
2. 20% larger bore : approximately 20% higher speed, higher gripping force and larger bore compared with usual chucks.
3. Model N-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
4. Model N-200A chucks are manufactur....
The Spec Of Power Chuck : 1. More large bore: having the largest bore in wede type power operated chucks.
2. 20% large bore: approximately 20% higher speed, higher gripping force and larger bore compared with usual chucks.
3. Model N-200A chucks are assembled with adaptor for ASA B5.9 type A spindles.
4. Model N-200A chuck are manufactured ....
The Spec Of Power Chuck : 1. More large bore: It's a wedge type with the largest bore.
2. Highest revolution: with the strongest graping power and the small sized light weight it is able to be more stable while at a highest revolution.That's more favorable foe taking up the machine's capacity.
3. Strongest gripping force: the special wedge me....
The Spec Of Power Chuck : 1. Gripping of round or irregular workpiece does not need to change the chuck.
2. The chucks are designed according to ASA B5.9 type A spindle.
3. The chucks are made from hight alloy steel. All siding surfaces are hardened and ground for increased running accuracy and longer service life. 1. Through hole (mm): 5....
The Spec Of Power Chuck : 1. All sliding surfaces are hardoned and ground for accurate running andlong service repeatability. Lubrication nipple in each master jaw.
2. Base jaw: 1.5mm X 60° serrtion.
3. Mounting: adaptor mounting to fit DIN, ISO, BS, ASA B5.9 type A spindles. NIT-208
1. Through hole (mm): Ø 52.
2. Plunger stroke (mm)....
The Spec Of Power Chuck : 1. 4 jaw wedge type through hole power chucks with adaptor.
2. Mounting: adator mounting to fit DIN, ISO, BS, ASA B5.9 type A spindles. 1. Model\dim: NT205
A: 135.
B: 60.
C(H6): 110.
D: 20.
E: 82.55.
2.Model\dim: NT206
A: 169.
B: 81.
C(H6): 140.
D: 19.
E: 104.78.
3. Model\dim: NT208
A: 210.
B: 91.
....
The Spec Of Power Chuck : 1. All sliding surfaces are hardoned and ground for accurate actual running andlong service repeatability. Lubrication nipple in each base jaw.
2. Base jaw: 1.5mm X 60°serrtion.
3. Mounting: adaptor mounting to fit DIN, ISO, BS, ASA B5.9 type a spindles. NT215
1. Through hole (mm): Ø 117.5.
2. Plunger stroke ....
The Spec Of Power Chuck : 1. Direct mounting: direct mount gor VA series chucks onto short taper spindles of ASA and JIS standards.
2. High preformance: similar high preformance to N series.
3. Chuck mounting screws: metric UNC socket head cap screws are supplied for bolting the chuck to the spindle.
4. Alternative spindle adaptors: ASA or ....
The Spec Of Power Chuck : 1. Direct mounting: direct mount gor VA series chucks onto short taper spindles of ASA and JIS standards.
2. High preformance: similar high preformance to N series.
3. Chuck mounting screws: metric or UNC socket head cap screws are supplied for bolting the chuck to the spindle.
4. Alternative spindle adaptors: ASA ....
The Spec Of Power Chuck : 1. Suitable for special applications: used for hold special shape work pieces such as square bar or flanges which is not possible with 3 jaw chucks.
2. Interchangeable with V or VA series.
3. Basic dimensions are the same as V type.
4. High preformance as V type. VT-210
1. Jaw stroke (mm): 8.8.
2. Plunger str....
The Spec Of Power Chuck : 1. More large bore: it's a wedge type with the largest bore.
2. Highest revolution: with the strongest graping power and the small sized light weight it is able to be more stable while at a highest revolution. That's more favorable foe taking up the machine's capacity.
3. Strongest gripping force: the special wedge m....
The Spec Of Power Chuck : 1. Gripping of round or irregular workpiece does not need to change the chuck.
2. The chucks are designed according to ASA B5.9 type a spindle.
3. The chucks are made from hight alloy steel. All siding surfaces are hardened and ground for increased running accuracy and longer service life. Model\dim: NHT208
1. ....
The Spec Of Power Chuck : 1. All sliding surfaces are hardened and ground and ground for accurate actual running and long service repeatability.
2. Mounting : adaptor mounting to fit with DIN, ISO, BS, ASA, B5-9 type a spindles. 1. Model/dim : F52.
2. Applicaoable wheel size : 12" ~ 18".
3. Out dai of chuck : 521.
4. Availabl....
The Spec Of Power Chuck : 1. Gripping accuracy of 0.03mm (0.0012inch)T.I.R.
2. Standard accessories chuck wrench and hex. key. One set of mounting bolts. (unc-bolts)
3. The body is made of meehanite MEEHANITE. It is suitably used for high speed revolution and 3 times more durable than regular chucks. 1. KD4-6".
2. KD5-8".
3.....
The Spec Of Power Chuck : Large-size lathe vertical lathe die set with jig and clamping of work piece. One set of 4-piece bolts with t-type handles (t-s; OT-bolts). ....
