The Spec Of Roll Forming Machine : 1. Material rack: flexible inner diameter of steel coil design. Easy to fix the material and not scrape the surface.
2. Roll-forming machine: roller material is unique steel and has been heat treatment. Meanwhile, main shaft has been heat treatment and polish.
3. Cutting device: hydraulic power cutting system. Cuttin....
The Spec Of Roll Forming Machine : This rolling & forming machine is designed to produce external frames for pocket filters. The external frames are the main parts to form a pocket filter. 1. Line source: 220V/3Phase.
2. Power: 1.5KW servo motor + 3HP hydraulic system.
3. Control system: HMI & PLC control panel.
4. Measuring accuracy: +/- 0.5mm/M....
The Spec Of Roll Forming Machine : 1. This cylinder hydraulic circle forming machine is capable of roller forming the sheet metal into cylinder work-piece. The hydraulic roller cylinder causes the forming quality of the work-piece even and stable. Pneumatic fastening makes the operation easy.
2. Dual axle metal plate circle forming machines ( automatio....
The Spec Of Roll Forming Machine : 45 mm ball bearing drawer slides are becoming best selling items. All most every ball bearing drawer slider manufacturer will make this drawer slide. Chin Minn has made more than 400 machines for this ball bearing drawer slides. There are some secondary operations, such as flat holes, notch, extruded holes punch and cu....
The Spec Of Roll Forming Machine : 1. 120KVA, synchronous type with IC controller.
2. This machine is used for the welding of the central body.
3. The pulsating current can be finely adjusted.
4. Driven by the DC motor, this machine has an SCR system and its water cooling system can work for 12 hours.
5. It is operational up to 1.6+1.6 m/m, with....
The Spec Of Roll Forming Machine : 1. The machine is used mainly for producing different sizes of carbon steel round pipe, square pipe and rectangular pipe.
2. High fequency welding.
3. Application: industry, construction, furniture, medical use, etc. 1. Production range (m/m O.D): 114.3-216.3.
2. Shaft (m/m): 100.
3. Motor (HP): DC120 x 2 VS20....
The Spec Of Roll Forming Machine : 1. Manual decoiler: non-motorize, manual expansion.
2. oil pump of hydraulic station£¨gear pump): CB-E310.
3. the material of blade: Cr12.
4. heating process of cutting blade: HRC600-620.
5. The single surface of roller is coated with chrome with 0.05 mm
6. Frequency converter.
7. The computer adopts PLC c....
The Spec Of Roll Forming Machine : Producing forming machines which are suitable to process sheet, it can widely used in producing storage racking, crossbeam, building material, hardware, electric appliances, etc. Producing forming machines which are suitable to process sheet up to 2mm. ....
The Spec Of Roll Forming Machine : 1. Description: ERW mill 1/2" - 18".
2. Saw mill 18" - 120".
3. Spiral mill 24" - 80".
4. Features application for plant facility and / or project designing. 1. Specification product specification: API, ASTM A53, JIS, CNS, BS.
2. Design / manufacturing: uncoiler, leveler, slitter,....
The Spec Of Roll Forming Machine : SY-RF103B hydraulic type iron case of oil seals side roll forming & combining machine.
1. Application: suitable for iron case of oil seals side roll forming and combining.
2. Feature: high speed location, low speed side roll forming and combining. 1. Power: clutch motor(air power)2HP+ oil press unit 2HP.
2. Volt....
The Spec Of Roll Forming Machine : Two section steel ball slides are being used for light duty and short extension application. Chin Minn has made several hundred roll forming machines for 27 mm steel ball slides. Heavy duty roll forming machines will provide most economic and low cost machine to produce 27 mm ball bearing drawer slides. This heavy duty....
The Spec Of Roll Forming Machine : 35 mm ball bearing drawer slides are becoming popular. In some application, not required heavy load, limit space, and need more extension distance, 36 mm 3 section ball bearing slides is enough. Chin Minn has made several hundred machines for this ball bearing drawer slides. Heavy duty roll forming machines will provid....
The Spec Of Roll Forming Machine : 45 mm ball bearing drawer slides are becoming best selling items. All most every ball bearing drawer slider manufacturer will make this drawer slide. Chin Minn has made several hundred machines for this ball bearing drawer slides. Heavy duty roll forming machines will provide most economic and low cost machine to produ....
The Spec Of Roll Forming Machine : 1. 7.5KVA, stepless type, pneumatic control
2. The central body will be 100% round after single-step forming at a high speed. The arm length is 5.5 meters, with a fixed stand in its front for balance. Length/ width:
1. 2550mm, 1000mm.
2. 2200mm, 1300mm. ....
The Spec Of Roll Forming Machine : 1. 7.5KVA, stepless type, hand control.
2. After forming of the central body, the ridge on the lower cover supported by the stand will be reinforced.
.. The min. diameter is 400 m/m. It is operational up to a thickness of 2.0 mm. Length/ width:
1. 1000mm, 650mm.
2. 1700mm, 400mm. ....
The Spec Of Roll Forming Machine : Trimming machine for top & bottom cover.
The Spec Of Roll Forming Machine : 1. Roll forming machine is a kind of locking machine which has single, double, triplex rolls, both side wheels and middle wheel. It's versatile, can roll hardware with different shapes. 7-20 axes can roll some workpieces with complicated shapes.
2. LS-100 roll forming machine has punching and notching system to cut sh....
The Spec Of Roll Forming Machine : This rolling & forming machine is designed to produce internal frames for pocket filters. The external frames are the main parts to form a pocket filter. 1. Line source: 220V/3Phase
2. Power: 1.5KW servo motor + 3HP hydraulic system.
3. Control system: HMI & PLC control panel.
4. Measuring accuracy: +/- 0.5mm/M....
The Spec Of Roll Forming Machine : "C" channel steel - roll forming machine with hydraulic cutting device. 1. Specification: 75 x 45 x 15.
2. Thickness of forming sheet: 1.6~2.3 mm.
3. Forming speed: 12~20 m/min.
4. Roll shaft dia: 60 mm Φ.
5. Number of stands:13.
6. Generation motor: 10 HP.
7. Please refer to the attached file for ....
The Spec Of Roll Forming Machine : Roofing and wall cladding forming machine. 1. Max. coil width: 914mm, 1220 mm.
2. Thickness of coil: 0.3-0.6 mm.
3. Line speed: 18-24 m/min.
4. Number of roll steps: 20-24 steps.
5. Roll quality: S45C hard chromiun coated surface finish.
6. Shaft diameter: 75 mm.
7. Drive moter: 10HP hydranl motor and combina....
The Spec Of Roll Forming Machine : Floor decking-roll forming machine . 1. Thickness of forming sheet: 0.8~1.6 mm.
2. Forming speed: 12~16 m/min.
3. Roll shaft dia: 85 ~95 mm Ø.
4. Number of stands: 20~30.
5. Hydraulic motor: 30~40HP. ....
The Spec Of Roll Forming Machine : The machine is used mainly for producing different sizes of stainless steel round pipe, square pipe, and rectangular pipe.
Application: industry, construction, furniture, medical use, etc.
Feature:
1. Our machines are manufactured from finest materials. Steady, durable and long life.
2. Automatic control, easy ....
The Spec Of Roll Forming Machine : 1. Manual decoiler: passive decoil, manual expansion.
2. Shaft of roller: 80mm ( heating process).
3. Oil pump of hydraulic station£¨gear pump): CB-E310.
4. The material of blade: Cr12 9. heating process of cutting blade: HRC600-620.
5. Frequency converter.
6. The operating broad adopts TD200 Siemens. 1. ....
