The Spec Of Tapping Machines : 1. Available for milling, boring, drilling, tapping and etc.
2. Gear head can be tied 90" right &left each.
3. Clutch operated micro down feed.
4. The headstock is composed 11 pieces precision of gear (all 2.0mm pitch) and all immersed in oil bath.
5. Available CE standard as fig shows such as: electric....
The Spec Of Tapping Machines : 1. 1.0 meter x 1.5 meter, the most popular worktable.
2. Function for drilling, tapping and milling long-holes.
3. High rigidness frame, competitive drilling speed.
4. High efficiency motors-> high torques for bigger diameters and high rev. for smaller diameters, Ø 14 -- Ø 50 mm.
5. Features:
(1) Two hydrauli....
The Spec Of Tapping Machines : 1. Tapping & drilling device:
Tapping is done by taps,taking advantage of the relative speed difference between tapping shaft & main spindle. In addtion,high precision & deeper hole processing can be done by drlling shaft instead of tapping shaft.
2. Main spindle & toll rack:
The main spindle is made by special st....
The Spec Of Tapping Machines : Max. turning diameter 20mm.
Both guide bush / Non guide bush holder are available for making complicated components.
Four axes simultaneously movement (X/Y/Z/B/C) work with main / sub tooling system.
With cross drilling, it works well in milling, drilling and tapping.
Main and sub spindle can drill simultaneously. ....
The Spec Of Tapping Machines : The A-series has the highest cutting tool capacity and is built for extremely intricate processing. The high speed spindle is ideal for cavity machining and precision engraving. Fully automatic full rotation, high speed, high precision. 1. Spindle speed 60~10000 rpm (STD).
2. Spindle speed 60~15000 rpm (OPT).
3....
The Spec Of Tapping Machines : T-140Max.Tapping Capacity M30
The Spec Of Tapping Machines : 1. For tap: M3~M22.
2. Speed: 120/300RPM.
3. Work range RMAX: 950mm, RMIN 100mm. 1. Weight: 25kgs.
2. Standard accessories:
(1) Air tapping spindle.
(2) Parallel arm.
(3) Table mounting column.
(4) Air unit.
(5) Choose any six safety clutch tapping adapters.
(6) Radial Jib. ....
The Spec Of Tapping Machines : Machinery for nuts. 1. Capacity: #8-5/16, M5-M8.
2. Production rate: 400-200 pcs/min.
3. Motor: 1HP x 4.
4. Lubricant: 300L.
5. TAP (mm): M180 x 25R.
6. Net weight: 680kgs.
7. Machine dimensions LxWxH(cm): 120 x 150 x 150. ....
The Spec Of Tapping Machines : Standard Feature-
1. Armless type 16T ATC.
2. Coolant system.
3. Floating tool clamp system.
4. Grease lubrication system.
5. Work lamp.
6. Spindle air blast.
7. Work air blast.
8. Auto. power off. (M30)
9. RS-232 interface.
10. Heat exchanger for elect. cabinet
11. Leveling bolts & pads.
12. Adjust tools &....
The Spec Of Tapping Machines : 1. Air tapping spindle.
2. Parallel arm.
3. Choose any six safety clutch tapping adapters.
4. Radial jib, increases arm reach by 500mm.
5. Table mounting column.
6. Air unit. 1. For tap: M2-M8.
2. Speed: 700RPM.
3. Work range: Rma1900mm, Rmin200mm. ....
The Spec Of Tapping Machines : Bicycle frame assembling and bicycle processing equipments. 1. Dimension (L x W x H): 1870 x 2000 x 1950.
2. Weight (kgs): 1450.
3. Electricity: 7.594 kw.
4. Air: 0.7 L / Min.
5. M/C cycle time: 45-60 sec / pc. ....
The Spec Of Tapping Machines : Rotary type drilling and tapping machine is designed for drilling and tapping oil cup and oil outlet hole on master cylinder, wheel cylinder, clutch cylinder. This machine has 5 working stations on its 6 station index table. 5 station can work at the same time. Station 1:loading and unloading parts
Station 2:Drill....
The Spec Of Tapping Machines : Product description: available for tapping round nut and other type of nut. Specification: M5~M24. ....
The Spec Of Tapping Machines : 1. Automatic loading bicycle axis two end drill tapping machine.
2. Strict quality control, best performance, superior quality, complete range of models, simple and easy maintenance, long service life, high reliability. According to cutomer's designs and specifications. Please Contact Us.We shall proceed your requ....
The Spec Of Tapping Machines : All the drill-sleeves, tapper set, and the clamp set of Hole cutter are designed with rapid adapter to streamline production.
This machine is designed with three functions for Tapping and Drilling by using twist-drill and center-free-drill. The most convenient for outgoing work.
The most suitable for cutting thos....
The Spec Of Tapping Machines : 1. Available for milling, boring, drilling, tapping and etc.
2. Gear head can be tilted 90° right 4 left each.
3. Clutch operated micro down feed.
4. The headstock is composed 11 pieces precision of gear (all 20.mm pitch) and all immersed in oil bath.
5. Available CE standard as fig shows such as: control system, ....
The Spec Of Tapping Machines : Features:
·Large working area
·Quick position
·No tap breakage even for blind hole
·High accuracy thread
·Easy operation
Optional Accessories:
·Vertical / Horizontal / Angular tapping head
·Drill chuck adaptor (JT2 or JT6)
·Magnetic stand
·Depth control Please refer to the attached file ....
The Spec Of Tapping Machines : 1. Installed an isolated cooling fan in the interior of motor to dissipate dissipate heat. Could be operated continuously, steady and durable.
2. Vertical column is solid and treated by tempering to get rid of stress, surface is chrome plated, wear resisting and no rust.
3. High speed rotation continuously, 42 time....
The Spec Of Tapping Machines : Features:
(1) Two hydraulic pumps: stable to clamp on 2 different areas
(2) Operation protection buttons: spindle not move to working area when loading / unloading workpieces.
(3) Auto measurement on drill length: auto measuring device → fast, precise and convenient save time and no inaccuracy measuring tolerance....
The Spec Of Tapping Machines : Features:
Large working area
Quick position
No tap breakage even for blind hole
High accuracy thread
Easy operation
Optional Accessories:
Drill chuck adaptor (JT2 or JT6)
Magnetic stand
Depth control
The Spec Of Tapping Machines : Features:
Large working area
Quick position
No tap breakage even for blind hole
High accuracy thread
Easy operation
Optional Accessories:
Vertical / Horizontal / Angular tapping head
Drill chuck adaptor (JT2 or JT6)
Magnetic stand
Depth control
The Spec Of Tapping Machines : Multifuntional tapping machines with magnetic base. 1. Power: 3ph, 1 (1/4) hp. 2. 6 steps speed variation: 69; 162; 201; 324; 473; 759rpm 3. Dill capacity: 5 - 25mm (3/16" - 1" ). 4. Tapping capacity: 6 - 26mm (1/4"-1"). 5. Main elevation shaft movable to adjust distance: 139 mm. 6. Feeding dept....
The Spec Of Tapping Machines : Automatic tapping and drilling machines. 1. Motor: 230V/ 50HZ or 110V/ 60HZ. 2. Power: 1100W. 3. Annular cutter arbor:set screw type, 19mm weldon shank. 4. Annular cutters: dia. 35mm by 50mm depth (1-3/8 x 2 in). 5. Taps: 12mm-19mm x 40mm depth (1/2- 3/4 in. x 1-9/16 in). 6. Twist drills: 15mm x 80mm depth (9/16 x ....
The Spec Of Tapping Machines : Tapping machines for steel processing. 1. Max.tapping capacity: M8. 2. Spindle taper: JT2. 3. Spindle travel: 45mm. 4. Spindle speed: 420. 760. 1340 rpm@ 50Hz; 500. 900.1600 rpm@ 60Hz. 5. Swing: Ø360mm. 6. Column diameter: Ø52mm. 7. Table size: 650 x 800 x 760mm. 8. Up-Down travel of the head: 280mm. ....
The Spec Of Tapping Machines : Manual drilling and tapping machines for steel processing. 1. Max. tapping capacity: M10. 2. Max. drilling capacity: Ø13mm. 3. Spindle taper: JT6. 4. Spindle travel: 80mm. 5. Spindle speed: 360-1560 rpm@ 50Hz; 440-1890 rpm@ 60Hz. 6. Number of speed: 4. 7. Swing: Ø360mm. 8. Column diameter: Ø80m....
The Spec Of Tapping Machines : T-120 Max.Tapping Capacity M20
The Spec Of Tapping Machines : T-650 Max.Tapping Capacity M20
The Spec Of Tapping Machines : T-360 Max.Tapping Capacity M12
The Spec Of Tapping Machines : T-80A Max.Tapping Capacity M16
The Spec Of Tapping Machines : T-80B Max.Tapping Capacity M16
