The Spec Of Tool Cutter Grinders : 1. Grinding capacity: 660 x 127 x 15.8 mm.
2. Grinding power: 2 hp.
3. Grinding wheel size: 150 x 100 x 25.4 mm.
The Spec Of Tool Cutter Grinders : 1. Max tool length: 200mm.
2. Max chuck dia: 32mm.
3. Max swing over table: 200mm.
4. Grinding spindle speed: 1000~6000rpm.
5. Main motor: 3Hp (2.25kw) / 5Hp (3.75kw).
6. X axis travel: 200mm.
The Spec Of Tool Cutter Grinders : 1. Apply linear slide rails to the X-axis, Y-axis, Z-axis, in combination with servo motor drive, the accurate locating and the slow feeding grinding could be achieved.
2. Servo motor control, it could discretionary sets out the teeth number and the feeding load.
3. Single-mere program, a one-shot single-mere simul....
The Spec Of Tool Cutter Grinders : 1. Longitudinal travel of table: 230mm.
2. Cross travel of saddle: 180mm.
3. Working table area: 620 x 190mm.
4. Tilting wheel head. It could be tilted easily and swiveled 360° on the horizontal plane. Both of these features make it easy to set the rake and relief angles and make for a wide angle or grinding.
The Spec Of Tool Cutter Grinders : 1. PA-7680: 3" air wheel grinder, no gear.
2. PA-8430: 4-1/2" air angle grinder, 1.0HP.
The Spec Of Tool Cutter Grinders : For grinding HSS and CARBIDE engraving cutter as well as single. lip or multiple-lip cutters of various shapes such as radiused cutters or negative taper angle of cutter. The universal index head is provide at 24 positions so that any particular angle or shape can be obtained, free 386oor 180o rotation is allowed. For ....
The Spec Of Tool Cutter Grinders : 1. Distance table between: 150mm.
2. CenersMax. grinding diameter: 150mm .
3. Wheel diameter (Dia. x Width x Bore): 150 x 40 x 40mm (5.9 x 1.5 x 1.5).
4. Grinding spindle speed: 3000rpm (60Hz) 2850rpm (50Hz).
5. Main motor: 3Hp (2.25kw) / 5Hp (3.75kw).
6. X axis travel: 150mm.
7. Y axis travel: 50mm.
8. B a....
The Spec Of Tool Cutter Grinders : 1. Distance table between: 150mm.
2. CenersMax. grinding diameter: 150mm.
3. Wheel diameter (Dia. x Width x Bore): 150 x 40 x 40mm (5.9 x 1.5 x 1.5).
4. Grinding spindle speed: 3000rpm (60Hz) 2850rpm (50Hz).
5. Main motor: 3Hp (2.25kw) / 5Hp (3.75kw).
6. X axis travel: 150mm.
7. Y axis travel: 50mm.
8. B ax....
The Spec Of Tool Cutter Grinders : 1. Apply linear slide rails to the X-axis, Y-axis, Z-axis, in combination with servo motor drive, the accurate locating and the slow feeding grinding could be achieved.
2. Servo motor control, it could discretionary sets out the teeth number and the feeding load.
3. Single-mere program, a one-shot single-mere simul....
The Spec Of Tool Cutter Grinders : 1. Apply linear slide rails to the X-axis, Y-axis, Z-axis, in combination with servo motor drive, the accurate locating and the slow feeding grinding could be achieved.
2. Servo motor control, it could discretionary sets out the teeth number and the feeding load.
3. Single-mere program, a one-shot single-mere simul....
The Spec Of Tool Cutter Grinders : 1. CNC tool grinder.
2. High precision.
3. Efficiency.
The Spec Of Tool Cutter Grinders : The TG-5 is based on special design, consists of a firm machine bed, 5 CNC Axes which equipped with high rigid ball screws and linear guides, to make operate smoothly without vibration. The collet chuck is ranged from O3-32mm when grinding out of the solid with CBN or diamond wheels. It is very suitable for Lots sizes ....
The Spec Of Tool Cutter Grinders : 1. End mill grinder - the end mill grinder is mainly applied to CNC lathe, CNC machining center, die making.
2. Break through Agaon in technology of drill sharpener quick and precise.
3. Cam device: this machine comes with four cams ranging from no.1 to no.4. simply change the cam when grinding to grind drill,end mil....
The Spec Of Tool Cutter Grinders : 1. End mill grinder - the end mill grinder is mainly applied to CNC lathe, CNC machining center, die making.
2. Break through Agaon in technology of drill sharpener quick and precise.
3. Cam device: this machine comes with four cams ranging from no.1 to no.4. simply change the cam when grinding to grind drill,end mil....
The Spec Of Tool Cutter Grinders : 1. This grinding machine features precision structural design and a range of useful functions with the added plus of easy operation.
2. All adjustments and blade replacements are carried out with the protective cover in place for the ultimate in safety and noise reduction.
3. This is a powerful yet operator- and envi....
The Spec Of Tool Cutter Grinders : 1. Eyan Machine Tools Co., Ltd professional manufacturer of circular Knifes Grinder,knifes grinder, surface grinders.
2. A surface grinder is a machine tool used to provide precision ground surfaces, either to a critical size or for the surface finish.
3. Universal surface grinder with vertical spindle and rotating c....
The Spec Of Tool Cutter Grinders : 1. Longitudinal travel of table: 185mm.
2. Cross travel of saddle: 120mm.
3. Working table area: 125 x 520mm
4. Motor could be rotated 360°, it could increase the grinding function and range of the machinery.
The Spec Of Tool Cutter Grinders : 1. Sharpen and recondition.
2. Parts with complex shape.
The Spec Of Tool Cutter Grinders : The CM-A Series is equipped with a linear scale and digital readout systems on the X, Y and A axes. The High Precision Camera Device(C.C.D.)provides maximum operational convenience, accurate positioning,increased efficiency and allows for on-line quality control. The machine features many versatile functions. It is ide....
The Spec Of Tool Cutter Grinders : 1. Versatility
2. Satisfy with your
3. Specific needs
The Spec Of Tool Cutter Grinders : 1. Monaset cutters and tool grinders.
2. Sharpen, and reconditions, parts with complex shapes.
3. Wheelhead toothrest assembly with extension bar.
4. Grinding wheel guards with extension bar.
5. Front stock support.
6. Straight cylindrical collets (please select "A" or "B"):
(A) Metric siz....
The Spec Of Tool Cutter Grinders : For grinding HSS and CARBIDE engraving cutter as well as single. lip or multiple-lip cutters of various shapes such as radiused cutters or negative taper angle of cutter. The universal index head is provide at 24 positions so that any particular angle or shape can be obtained, free 386oor 180o rotation is allowed. For ....
The Spec Of Tool Cutter Grinders : 1. Monaset cutter grinders.
2. The CM-A Series is equipped with a linear scale and digital readout systems on the X, Y and A axes. The High Precision Camera Device (C.C.D.)provides maximum operational convenience, accurate positioning, increased efficiency and allows for on-line quality control. The machine features m....
The Spec Of Tool Cutter Grinders : 1. Chip breaker slot grinding machine.
2. Automatic chip breaker grinder machine for HSS circular saw blades.
3. Designed for auto chip breaker slot grinding machine at a time.
4. Touch-sensing screen provides easy operation and adjustment and fast accomplishment.
5. Cross and vertical movement are operated by ai....
The Spec Of Tool Cutter Grinders : 1. Grind wheel: for metal grinding, cutting and edging, knife grinding.
2. Polish wheel: for polishing, precision sleeking.
The Spec Of Tool Cutter Grinders : 1. Both side with safety wheel guard made of steel plate.
2. Both side with adjustable tool rest and adjustable eye-shield.
3. One each of coarse and medium grinding wheel.
4. Housing & base are made of cast iron.
The Spec Of Tool Cutter Grinders : 1. With safety throttle lever, built-in speed regulator.
2. Grinding wheel / cutting wheel size: 2 inch (not included).
The Spec Of Tool Cutter Grinders : With safety throttle lever, built-in speed regulator.
The Spec Of Tool Cutter Grinders : 1. PG-8042: 1/4" silent air die grinder.
2. PG-8092: 1/4" silent air die grinder, 25000rpm.
3. PG-8104: 1/4" silent air angle die grinder, 15000rpm.
The Spec Of Tool Cutter Grinders : 1. PG-8120: air pencil die grinder, 54000rpm.
2. PG-8145: 3mm air pencil die grinder -70000rpm.
(1) Small grinder normally equipped with a collet.
(2) For use with carbide burrs and mounted points.
(3) Penumatic industrial tools.
(4) Designed for high speed porting and finishing of small parts.
3. PG-8200: air p....
