The Spec Of Welding Equipments : For welding, spot welding, inserting, staking, forming, degating application. Multi-functions, cooperate with the peripheral equipment use of automation. Importanting Japense "NTK" transducer for top energy. 1. Output: 1500W.
2. Frequency: 20KHZ.
3. Line source: 220V/1Phase.
4. Air cylinder: dia.63 mm ....
The Spec Of Welding Equipments : ‧ Advanced circuit and MOSFET inverter technology adapted.
‧ High frequency starting with pulsation thermal initiation design.
‧ Handy power supply with effective energy saving solution.
‧ Automatic voltage pulsation compensation
‧ Fast dynamic response, noise free, low spatter and without magnetic b....
The Spec Of Welding Equipments : It is for processing the PEVA, PVC sheet, drawing processing, inflatable toy, shoes, handbags, plastic canvas, rainwears, umbrellas furniture, pattern of automobile interiors and seat. It is for processing stationery, plastic bag, special cover, solderless terminal cover, welded plastic tube, trademark, sealing, dr....
The Spec Of Welding Equipments : The wire mesh welding machine or the wire mesh welder is to weld & produce welded mesh used in constructional work, buildings, steel structure, wall structure, reinforced concrete road, retaining wall, protection slope, floor, floor boards, successive wall, tunnels, fence, etc. The machine can be tailor made accord....
The Spec Of Welding Equipments : 1. Utilize rapid cutting to joint & welding coil.
2. Construction patented. Hydraulic dual blades cutting, flat and straight for easy welding.
3. Manual pneumatic or hydraulic simple copper mold clamping, automatic centering, accurate and fast operation.
4. Adopt precise motor control, welding gun movement is sta....
The Spec Of Welding Equipments : Whole plant equipements for making stainless steel butt welding fittings:
1. Cuttings machines.
2. Forming machines.
3. Bevelling machines.
4. Pickling equipments.
5. Heat treatment equipments. 1. 90 L/R elbows: 1/2"-12". 2. 45 L/R elbows: 1/2"-12". 3. Tees & reduced tees: 1/2"-12&....
The Spec Of Welding Equipments : Normal Capacity:50KVA
Input Volatage:220/440V
Frequency:50/60HZ Max. Short Current:20000A
Max. Weld Power:110KVA
Duty Cycle:10%
Cooling Water Capacity:15 ....
The Spec Of Welding Equipments : 1. Adopt with fanuc welding robot, most suitable designed tooling, and automatic welding to save labor cost with enhanced quality and steady output.
2. Large operation range to increase applicable to various sizes of work pieces.
3. Teaching type for easy operation & high production efficiency, auto displays error me....
The Spec Of Welding Equipments : DAHLIAN provide our cutomer
- high precision tooling
- quick on time delivery
- the competitive price
- best service Cold Forged, hot forged, turning parts and machine Part, auotmotive part, special design. ....
The Spec Of Welding Equipments : Engineering and manufacturing service:
1. R&D process tooling & jigs design.
2. Product testing & measuring including shear tensile strength testing.
3. Micrographic and metallurgical analysis. We also do the following for the customers:
1. Laser marking of symbols.
2. Pad printing.
3. CP finish. ....
The Spec Of Welding Equipments : 1. Product name: vertical high speed bandsaw blade welders.
2. Band saw blade welder, free standing. 1. Capacity: 2.0kva.
2. Band width: 3-13mm. ....
The Spec Of Welding Equipments : Product name: standard ultrasonic cleaner. Instead of commercial ultrasonic frequency 18~90KHZ, we developed machine featuring anti-high temperature and ultra-low frequency 22/40KHZ for industrial ultrasonic cleaning to encourage industries to do front-and-back processing and boost product quality. ....
The Spec Of Welding Equipments : Mask tie tape welding machine:
The machine is special design to weld tie tape on the blank masks automatically. Need one worker to feed mask blanks into machine conveying jigs. 1. Machine feature specification:
2. Compact size and reliable performance.
3. All aluminum alloy made construction.
4. Photoelectri....
The Spec Of Welding Equipments : 40KVA, synchronous type with IC controller.
It sets the dimensions of the central body and the welding specification. This machine has an SCR system and an arm length of 5.5 feet with a welding capacity of 1.5 + 1.5 m/m and a fixed stand. Length x Width
2550mm x 700mm
1600mm x 800mm ....
The Spec Of Welding Equipments : Application: for punching of various shapes of holes (e.g. round, oblong, square & etc.) on papers, plastic or leather for binding with spiral, comb, computer or loose leaf binders. Tooling is available on request. 1. Model: HC-5TRJ.
2. Maximum workpiece size: 360(L) x 550(W) mm.
3. Height from floor to table: 75....
The Spec Of Welding Equipments : Features:
1. Air control cylinder construction and solenoid valve.
2. High conductivity secondary re-circuits.
3. Sold frame structure.
4. Both interior and exterior of machine are treated with coating.
5. An optional press adjuster is provided for upward and downward adjustment.
6. All series with microcomputer ....
The Spec Of Welding Equipments : 1. High-speed, hing-productivity (0.6sec/line).
2. Superior flexibility for producing of the most different type and sizes of wire mesh by fast and simple chang-over.
3. Future looking versatility by modular system to incorporate options to suit to any future requirement.
4. GSA-80: wire mesh for furniture, wire she....
The Spec Of Welding Equipments : 1. Multi-voltage, single-phase input permits to use at many locations. SCR-controlled, continuously variable current and voltage from minimum to maximum.
2. Reliable solid state contactor.
3. Energy-saving circuit in MIG mode keeps fan on only while welding, automatically shuts off 6 minutes after completion of weld.....
The Spec Of Welding Equipments : 1. Machine job: for spoke/nipple type motorcycle rim 2 sides "Ear" seam welding.
2. Welding electrode wheel:
(1) 4 pcs electrode wheel - upper electrode wheels : LH & RH.
(2) Lower electrode wheels : LH & RH.
(3) Electrode wheel material - CrCu alloy.
(4) Electrode wheel size - Ø300mm x t.12mm.
3. We....
The Spec Of Welding Equipments : This precision mini-type welding machine is specially designed for capacitor's lead wire welding, separate and united type, light, only need a small space. It is used of a device with synchronous IC controlling circuit to transmitting phase angle and timing of S.C.R. to adjust welding circuit, so welding achieved is ve....
The Spec Of Welding Equipments : 1. High-technological welding machines.
2. Humanized design for easy operation.
3. Multi-functions! High efficiency.
4. Welding, sport welding, inserting, forming & degutting; importing Japanese "NTK" transducers for top energy.
5. Features:
(1) Adopt IC automatic control system, easy supersonic set....
The Spec Of Welding Equipments : Soldering machine is collaborated with fully-automated engineering service for soldering pins. We offer customized products to meet customers' requirements. ....
The Spec Of Welding Equipments : 1. Applications: mainly used for conveying of oxygen gases for welding and cutting equipment.
2. Tube: NR & SBR synthetic rubber, black color.
3. Reinforcement: high tensile synthetic yarn braided or spiraled.
4. Cover: NR & SBR synthetic rubber, red and blue in colors, etc.
5. Characteristics: abrasion resistant, ....
The Spec Of Welding Equipments : Every wire harness is produced by Gamma 333PC fully automatic crimping machine according to IPC-A-620 workmanship standard and assembled together according to customers' specifications. 100% electrical test is provided on function, short and open circuit, hi-pot and insulation resistance. According to customer spec....
The Spec Of Welding Equipments : 1. Lead wire cutting device.
2. Wire brush.
3. Tube length check.
4. Base pin check.
5. Filament check. 1. Capacity: 1,400 pcs /hr.
2. Operator: one man
3. Machine dimensions & weights: 3,000mm x 1,500 x 1,200. Approx. 2,200 kgs.
4. Power:
(1) main motor: 3, 220/380v, 0.75 kw x 1 set.
(2) brass br....
The Spec Of Welding Equipments : 1. Frequency (Hz): 60Hz.
2. Engine: GX390 / 13hp.
3. Displacement(CC): 389.
4. Rated Output(DC): 170A 28V .
5. Max Output(AC): 110V 60Hz 4000VA .
6. 220V 60Hz 3000VA. 1. Starting system: recoil starter.
2. Tank capacity: 17 L.
3. Continuous operating hours: 5.2 hr.
4. Dimensions (mm): 740(L) x 480(W) x 5....
The Spec Of Welding Equipments : 1. Utilize rapid cutting to joint & welding coil.
2. Construction patented. Hydraulic dual blades cutting, flat and straight for easy welding.
3. Manual pneumatic or hydraulic simple copper mold clamping, automatic centering, accurate and fast operation.
4. Adopt precise motor control, welding gun movement is....
The Spec Of Welding Equipments : 1. This cylinder hydraulic circle forming machine is capable of roller forming the sheet metal into cylinder work-piece. The hydraulic roller cylinder causes the forming quality of the work-piece even and stable. Pneumatic fastening makes the operation easy.
2. Dual axle metal plate circle forming machines ( automatio....
The Spec Of Welding Equipments : 1. Summary: this machine is specially designed to weld the straight seam of the cylinder, hot-water heater, drum, and square container.
Back-up rod adopts water cooling method. Keyboard style pressure hold-down. Back-up rod can be changed as per requirement. Welded seam is flat and straight. Good weld penetration and....
The Spec Of Welding Equipments : 1. Through the design of the center bore on the shaft of the turn table in this series, the installation of the air hose or pneumatic material discharging device is optional. This has the merits of high rigid and fast heat dissipation.
2. To fix the angle of the turn table by adjustable hand lever mounted on base wall....
