Select
The Spec Of Card Connectors : 1. Application: for 3.3V type smart media card use only.
2. Materials and finish:
(1) Contact: phosphor bronze.
a. Tin/Lead 100 at solder tail.
b. Contact area gold plating 15.
(2) Insulator bass: synthetic resin, UL 94V-0 black color.
(3) Cover: brass, nickel plating for all. 1. Withstanding voltage: 5....
Select
The Spec Of Card Connectors : 1. Simple style (H:1.5mm).
2. Insulation resistance pin to pin: > 1000 Megohms/500Vdc.
3. Dielectric withstanding: 500 AC rms 1 min(sea level).
4. Operating temperature: -40°C to + 85°C. 1. Durability: 100,000 cycle min.2. Contact resistance: 50 megohms typical, 100 megohms. ....
Select
The Spec Of Card Connectors : Slim type 40.16mm normal short body.
Material:
1. Housing: high temperature thermoplastic.
2. Contact: copper alloy.
3. Ped: brass. Plating: 1. Contact: underplasted: 50 u min. Ni. 2. Contact area: select gold over Ni plated. 3. Solder tail: 100 u min Sn / Pb over Ni plated. 4. Ped: 100 u min Sn / Pb over 50 N....
Select
The Spec Of Card Connectors : 1. IEEE 1394 B Bilingual socket right angle DIP.
2. Shell resistance: 50 milliohms Max.
3. Operating temperature: -40°C- + 85°C.
4. Storage temperature: -40°C- + 105°C. 1. Voltage rating: 30V. 2. Current: 1.5 amps. 3. Dielectric withstand: 100 Vdc. 4. Insulation resistance: 100 megohms Min. 5. Contact resist....
Select
The Spec Of Card Connectors : 1. Normal version.
2. Contact resistance: 40 m ohms max.
3. Operating temperature: -20 C~+60C.
4. Insertion cycles: 10,000 times. 1. Withstanding voltage: 1000V DC max for 1 minute. 2. Insulation resistance: 500 M min. 3. Rated voltage: 100V DC. 4. Current rating: 0.5A AC/DC max. ....
Select
The Spec Of Card Connectors : 1. Type I stand off 1.7mm version.
2. Insulation resistance: 1000 ohm min.
3. Dielectric strength: 5000VAC/1min.
4. Operating temperature: -40°C- 85°C. 1. Housing: high temperature plastic UL94V-0. 2. Contact: copper alloys. 3. Voltage rating: 100VAC. 4. Current rating: 0.5A. 5. Contact resistance: 40 millionh....
Select
The Spec Of Card Connectors : 1. Push-in / push-out type.
2. This product applies to the mechanical specification version 1.0 of SanDisk transflash memory module. 1. Housing: thermoplastic UL94V-0.(1) Color: black.(2) Push bar: thermoplastic UL94V-0.(3) Color: black.(4) Contact: phosphor bronze.(5) Shell: phospor bronze, nickel plating for all....
Select
The Spec Of Card Connectors : 1. IEEE 1394 B bilingual socket vertical.
2. Operating temperature: -40°C- +85°C.
3. Storage temperature: -40°C- +105°C.
4. Voltage rating: 30V. 1. Current: 1.5 amps.2. Insulation resistance: 100 megohms Min.3. Contact resistance: 50 millionhms Max.4. Shell resistance: 50 milliohms Max.5. Withstanding voltag....
Select
The Spec Of Card Connectors : 1. Without cover type.
2. Contact resistance: 40M Ohms Max.
3. Operating teperature: -25C ~+ 85C.
4. Insertion cycles: 10000 Times. 1. 1 pcs. 2. Withsanding voltage: 500V ACMax for 1 minute. 3. Insulation resistance: 1000 M Ohms. 4. Voltage Rating: 250V AC. 5. Current rating: 0.5A AC/DC Max. ....
Select
The Spec Of Card Connectors : 1. Application: for 3.3V type smart media card use only.
2. Material and finish:
(1) Contact: phosphor bronze.
a. Tin / lead 100 at solder tail.
(2) Contact area gold plating 15.
(3) Insulator bass: synthetic resin, UL 94V-0 black color.
(4) Cover: brass, nickel-plating for all. 1. Withstanding voltag....
Select
The Spec Of Card Connectors : 1. XD-picture memory card connector type A, standard type.
2. Ordering information about XDAMB-X21XXA0X0X0.
(1) The first " x " means plating.
(2) The middle two " x " means the contact area plating.
(3) The fourth " x " means package. The contact area plating: " 0 - 5 &quo....
Select
The Spec Of Card Connectors : 1. XD picture memery card push- push connector type.
2. Ordering information about XDBMB-01915BT00.
(1) The first two " x " means the contact area plating.
(2) The third " x " means the natural color: black.
(3) The fourth " x " means tin- lead, lead free.
(4) The last " x "....
Select
The Spec Of Card Connectors : 1. Housing: high temperature plastic, UL 94V-0.
2. Contact: copper alloys.
3. 50 Pin type1 normal type.
4. Compact flash type I card connector. Compact flash type I card connector stand off 1.7mm version. ....
Select
The Spec Of Card Connectors : 1. Compact flash card connector straddle version.
2. Housing: high temperature plastic, UL 94V-0.
3. Contact: copper alloys.
4. Current rating: 0.5A. 1. Voltage rating: 100 VAC.
2. Dielectric strength: 500 VAC/ 1 min. ....
Select
The Spec Of Card Connectors : 1. Push button right ejector for compact flash card connector.
2. Ejector: high temperature plastic, color is black.
3. This card is parallel bars type. 1. Cover: SUS 304, T = 0.3mm; heaver: SUS 304, T = 0.3mm.
2. Ejector seat: SUS 304, T = 0.3mm. ....
Select
The Spec Of Card Connectors : 1. Mirco SD ( trans flash ) card connector hinge type.
2. Housing: thermoplastic UL 94V-0.
3. The color is black.
4. Contact: phosphor bronze. Tin 100u at solder tail. ....
Select
The Spec Of Card Connectors : 1. Micro SD ( trans flash ) card connector push- push type.
2. Housing: thermoplastic UL 94V-0.
3. Color: black.
4. Contact: phosphor bronze. Tin 100u at solder tail. ....
Select
The Spec Of Card Connectors : 1. Mini SD card connector push-push reverse type.
2. Housing: temperature thermoplastic.
3. Contact: copper alloy.
4. Shell: copper alloy. 1. Voltage rating: 250 VRMS.
2. Current rating: 0.5A. ....
Select
The Spec Of Card Connectors : 1. Mini SD card connector manual type.
2. Housing: thermoplastic UL 94V-0.
3. Color: black.
4. Contact: phosphor bronze.
5. Cover: phosphor bronze, nickel plating for all. Tin/ lead 100u" at solder tail. ....
Select
The Spec Of Card Connectors : 1. Secure digital card connector without cover type.
2. Ordering information: SDAMB-01201BT00, the first two " x " means the contact area; the third " x " means plating type; the four " x " means package; the fifths " x " means logo. Tin lead 90/ 10. ....
Select
The Spec Of Card Connectors : 1. Secure digital card connector push-in/ push-out type.
2. Information about 01201BT00: the first " x " means plating type; the middle two " x " means contact area plating; the last " x " means logo: with or without logo. Tin lead 90/ 10. ....
Select
The Spec Of Card Connectors : Slot pitch 2.54 mm right angle dip type.
Material:
1. Insulator: glass-reinforced thermoplastic (PBT UL94V-0 rated).
2. Contact: copper alloy.
3. Plating: mating area-select gold over nickel. Solder area-tin/ lead over nickel. Electrical:
1. Dielectric withstanding voltage: 1,00V VAC RMS.
2. Current rating: ....