The Spec Of Electronic Capacitor Manufacturers : 1. Dry-type power capacitors produced by Yuhchang Electric Co., Ltd. are designed particularly to improve power factor. It is successfully invented after many years research by Yuhchang Electric Co., Ltd. itself which firstly take high-tech skills from some advanced countries in both Europe and America.
2. P-series dr....
The Spec Of Electronic Capacitor Manufacturers : 1. Ceramic Disk Capacitor & Multi-layer Ceramic Capacitor (Radial).
2. This SPARK GAP is designed for use in protector of CRT circuit and protector of circuit tothe high potential pulse.
3. As this SPARK GAP is a complete sealing type, so in the discharge, a spark does not appear in the outside, a discharge sound....
The Spec Of Electronic Capacitor Manufacturers : The NPO (COG) is a high Q, low K temperature compensating type of dielectric with stable electrical properties under varying voltage, temperature, frequency and time. It's suitable for circuits that require low lost, as well as timing and tuning applications.
The X7R has moderate K value and is temperature stable. It ....
The Spec Of Electronic Capacitor Manufacturers : 1. 85℃ stand, case diameter 4~10mm.
2. Reflow soldering is available.
3. Available for high density mounting.
4. For detail specifications, please refer to engineering bulletin No. 130. 1. Operating temp (℃): -40℃~+85℃. 2. Capacitances (µF): 0.1~47uF 68~1000uF +20% (at 20℃, 120Hz). 3. Rated volta....
The Spec Of Electronic Capacitor Manufacturers : Dielectric：Metallized Polypropylene film
Winding：Non-inductive type
Protection：Round Aluminum can with heat-shrinkable tubing cover, and UL 94V-0 epoxy resin filled.
Leads：UL 1015 PVC insulation wire
Marking：Manufacturer’s logo, rated capacitance, tolerance ,rated voltage, approvals, operating temperatu....
The Spec Of Electronic Capacitor Manufacturers : 1. Aluminum electrolytic capacitors.
2. 85℃ general purpose.
3. Load life : 85℃ 2000 hours. 1. Category temperature range: -40 ~ +105℃ to -25 ~ +105℃. 2. Rated voltage range: 6.3 ~ 250 V.DC to 350 ~ 450V.DC. 3. Capacitance tolerance: ±20%(M)(25℃，120Hz). 4. Leakage current (MAX): (1) 6.3 ~ 10....
The Spec Of Electronic Capacitor Manufacturers : 1. Special purpose capacitor to compensate power factor.
2. BDP (apply to ballast).
3. High stability.
4. Self-healing. 1. Molded rectangular case of black polyester-glass which is flame retardant per UL 94V-O.
2. The epoxy filing used to fill the enclosure and protect the capacitor which is flame retardant p....
The Spec Of Electronic Capacitor Manufacturers : Specification and dimension:
1. High stability.
2. Non-inductive.
3. Miniature size.
4. Self healing.
5. Molded rectangular case of black polyester-glass which is flame retardant per UL 94V-O.
6. The epoxy filing used to fill the enclosure and protect the capacitor which is flame retardant per UL 94V-O.
7. ....
The Spec Of Electronic Capacitor Manufacturers : 1. Voltage range: 275VAC.
2. OEM and ODM custom design are accepted. Cap. range: 01-1. ....
The Spec Of Electronic Capacitor Manufacturers : 1. The products of CKX X1, X2 that made in Taiwan and China are both approved by many international safety standards such as UL, CSA, VDE, SEMKO, NEMKO, FIMKO, DEMKO, satisfying customers' high quality requirement.
2. Rated voltage: 250 / 300 VAC, 50~60 Hz.
3. Capacitance range: 0.0047μF~6.8μF.
4. The dielectri....
The Spec Of Electronic Capacitor Manufacturers : PEI are constructed with polyester film dielectric aluminum foil electrode, copperply lead and epoxy resin in coating in inductive type. They are suitable for blocking, by-pass and coupling of DC and signal to VHF range, timing circuits, filtering and other general purpose usage and are ideal for use in TV, radio, tape....
The Spec Of Electronic Capacitor Manufacturers : 1. Small in dimension、Light in weight.
2. Low dissipation factor.
3. Good self-healing.
4. Oil-immersion structure and good heat-dissipation character.
5. Antiexplosive device and safety reliability（Class P2）.
6. Uses：The product is used in discharge lamp circuits operating at 50/60 Hz and altitudes up not....
The Spec Of Electronic Capacitor Manufacturers : 1. Operating temperature: -40 ~ +85℃.
2. Capacitance range: .01~10 µf.
3. Capacitance tolerance: ± 5%, ± 10%, ± 20%.
4. Rated voltage: dc 100v 250v 400v 630v.
5. Dissipation factor: 0.75% max at 1khz 25℃.
6. Insulation resistance: >30,000 mω (c≦.33 µf), >10,000 mω*µf (c>.33 µf) at 25℃....
The Spec Of Electronic Capacitor Manufacturers : 1. Specifications: temperature characteristics
(1) NPO: 0+30 ppm/℃.
(2) X7R: +15%.
(3) Z5U/Y5V: +22%, -82%.
2. Specifications: operating temperature range
(1) NPO: -55 to +125.
(2) X7R: -55 to +125.
(3) Z5U/Y5V: -30% to + 85℃.
3. Specifications: dissipation factor (25, 1khz)
(1) NPO: 0.15% max a....
The Spec Of Electronic Capacitor Manufacturers : Typical applications: interference suppression and across-the-line applications suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. 1. MPX Type: 0.0047~1.0uF 275VAC, -40℃~+100℃. 2. This type especially is designed for radio interference suppression and acros....
The Spec Of Electronic Capacitor Manufacturers : 1. Life 1000 hours at 85℃.
2. For automatic insertion.
3. Suitable for consumer electronic products, such as stereo radios, TV sets, etc. 1. Voltage range: 6.3 to 100VDC. 2. Capacitance rang：0.47 to 10000μF. 3. Temperature: -40 to + 85℃. 4. Capacitance tolerance: + 20% - 20% (at 20℃, 120Hz.) 5. Leakage....
The Spec Of Electronic Capacitor Manufacturers : 1. Chip: vertical chip type height 5.5mm / vertical chip type hwight 5.5mm 105(°C) standard/ vertical chip type height 5.5mm non-polarized.
2. Radial: small size 5mm, height 5mm / small size 5mm, 105° C standard / small size 5mm, non-polarized / small size 7mm, height 7mm/ small size 7mm, height 7mm(°C) / small siz....
The Spec Of Electronic Capacitor Manufacturers : Features:
1. Ultra miniature size external dimmensions of 3.2(w) x 4.5(l) x 1.7(t)mm.
2. Designed for reflow soldering.
3. Very good quality and high resonant frequency.
4. Color coded permits easy identification. Applications:
1. AV equipment.
2. Cellular phone.
3. Cordless phone.
4. TCXO
5. Keyless entr....
The Spec Of Electronic Capacitor Manufacturers : 1. Completed ISO 9002 (edition 1994) certifiation by DNV in 1999.
2. Both ISO 9002 were updated to ISO 9001(edition 2000) and SS6 series (power entry modules) were completed in 2002.
3. IECQ QC080000 approval and laboratory has ISO/IEC 17025 and SMTA certification in 2006. 1. Brand: KEMET.2. Case size: 1206.3. Di....
The Spec Of Electronic Capacitor Manufacturers : For general for printed circuit board high -performance input and output filter capacitors.
1. HD type capacitors are ideally suitable to be used industrial or commercial applications.
2. This type also has snap-lock terminals for diameter over 35.0 mm.
3. For detail specifications, please refer to Engineering Bu....
The Spec Of Electronic Capacitor Manufacturers : MPF are constructed with metalized polypropylene film dielectric, copperply lead and epoxy resin coating. They are suitable for blocking, by-pass, coupling, decoupling, filtering, timing, tuning temperature compen sation, and ideal for use in telecommunication equipments data processing equipments, industrial instrumen....
The Spec Of Electronic Capacitor Manufacturers : 1. Meets or exceeds EIA standard 535BAAC.
2. Taped and reeled EIA 481-1.
3. Symmetrical, complicant terminations.
4. Optional gold-plated terminations.
5. Laser-marked case. 100% surge current test on C, D, E, X sizes. ....
The Spec Of Electronic Capacitor Manufacturers : 1. Bulk and taping package (diameter 10 w/m and under) are available.
2. The lead spacing for taping package is 2.5w/m (straight leads) and 5w/m (straight and inside-kink leads).
3. If working voltage is higher than 3K VDC, capacitors shall be coated with flame-retardant epoxy in blue color. 1. From 50VDC to 18K....
The Spec Of Electronic Capacitor Manufacturers : Dielectric：Metallized Polypropylene film
Winding：Non-inductive type
Protection：Plastic case and epoxy resin filled
1) BO type：Rectangular Plastic Case
2) BL type：With mounting plates in case
3) BT type：With mounting metal plates on top of case
Lead style：
1) TC：Tinned copper wire
2) PC：PVC in....
The Spec Of Electronic Capacitor Manufacturers : Dielectric：Metallized polypropylene film
Winding：Non-inductive type
Protection：Polyester wrapping and epoxy resin filled
Lead style：
TC Tinned copper wire
PC PVC insulation wire
Marking：Manufacturer’s logo, capacitance, tolerance, rated voltage, date code, approvals, series, operating temperature, r....
The Spec Of Electronic Capacitor Manufacturers : Dielectric：Metallized Polyester or Polypropylene film
Winding：Non-inductive type
Protection：Polyester wrapping and epoxy resin filled
Lead style：
1) TC：Tinned copper wire
2) PC：PVC insulation wire
Marking：Manufacturer’s logo, capacitance, tolerance, rated voltage, date code, approvals, series, ope....
The Spec Of Electronic Capacitor Manufacturers : Dielectric：Metallized Polypropylene film
Winding：Non-inductive type
Protection：
Axial type - Polyester wrapping and epoxy resin filled
Round type - Round Aluminum can and UL 94V-0 epoxy resin filled Dry capacitorsPower factor correctionExcellent self-healing property ....
The Spec Of Electronic Capacitor Manufacturers : Dielectric：Metallized Polypropylene or Polyester film
Winding：Non-inductive type Protection：Epoxy resin filledBO type - Rectangular Plastic CaseBL type - With mounting plates in caseBT type - With mounting metal plates on top of caseBR type - Round plastic caseAXIAL type - Axial lead and tape wrappedLead sty....
The Spec Of Electronic Capacitor Manufacturers : Dielectric：Metallized Polypropylene film
Winding：Non-inductive type
Protection：Round Aluminum can with heat-shrinkable tubing cover, and UL 94V-0 epoxy resin filled
Leads：Fast-on terminals
Marking：Manufacturer’s logo, rated capacitance, tolerance, rated voltage, approvals, operating temperature rated fr....
