The Spec Of Fiber Optical Cables : 1. Comply with ITU specifications.
2. Comply with ITU, IEC and EIA / TIA-FOTP test standards.
3. Reliability and stability.
4. Cost savings & high efficiency on cable installation.
5. Light weighted, bending resistant for installation at inhospitable area.
6. Water penetration resistant.
7. Free from EMI.
8.....
The Spec Of Fiber Optical Cables : Plastic optical fiber. 1. ψ1.5mm PMMA.
2. Transmission loss: ≦250dB/km. ....
The Spec Of Fiber Optical Cables : 1. With stainless steel tube for protection, small core diameter, high intensity, light weight.
2. Absolute seal design, highly resistant to chemical corrosion and oil.
3. Imprinted with product information and lengh indication. 1. Fiber count: 1 fiber, 2 fibers. 2. Structure: seamless tube. 3. OD: 2.1mm, 3.0mm.....
The Spec Of Fiber Optical Cables : MFOC’s optical closure are designed for use with any cable construction (loose buffer tube, central core tube, loose fiber, ribbon), in any environment (aerial, pedestal, buried, hand hole, manhole) and for numerous splice applications (expressed, tap-off, branch and repair). 1. Diameter: 122 mm.2. Length: 340 mm....
The Spec Of Fiber Optical Cables : Gloriole's Optical Node Cable comes fully assembled with a standard 5/8" 24-thread metal housing and provides secure, watertight connections for safe installation and easy operation. Several cable types, configurations and connector styles are available for CATV receiver applications. Features:
1. Low inserti....
The Spec Of Fiber Optical Cables : Product description:
1. The fiber, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact a....
The Spec Of Fiber Optical Cables : Sin Yu offers variety of types as below to satisfy your requirement.
1. Loss tube type optical fiber cable.
2. Self-supporting type optical fiber cable.
3. Optical cable. 1. Low transmission loss.
2. Large information carrying capability.
3. Immunity toward EMI (Electromagnetic Interference)
4. Fiber's ra....
The Spec Of Fiber Optical Cables : Features:
Accurate fiber excess length ensures good mechanical and temperature performance.
High strength loose tube that is hydrolysis resistant and special tube filling compound ensure a critical protection of fiber.
Specially designed compact structure is good at preventing loose tubes from shrinking.....
The Spec Of Fiber Optical Cables : Product Name: OPTICAL FIBER SC/PC-SC/PCDUPLEX SM 3.0mm 3M ....
The Spec Of Fiber Optical Cables : Fiber optical cables :
Multimode:
(1) Insertion loss typical: ≦0.3dB; insertion loss maximuml: ≦0.5dB.
(2) Durability(500cycles):
The Spec Of Fiber Optical Cables : 1. PC polishing or UPC polishing.
2. Low insertion loss.
3. High return loss.
4. Standard housing, ceramic ferrule.
5. Cable diameter: 3.0mm.
6. Connector type: SC (ST, FC, LC, MTRJ, MU, E2000 are also available).
7. Insertion loss: ≤ 0.3dB (UPC ≤ 0.2dB).
8. Return loss: PC ≥ 45dB (UPC ≥ 50dB).
9. Rep....
The Spec Of Fiber Optical Cables : 1．Adopt optical fiber panel as the central unit, high mold amount, aramid strength member around.
2．Flexible, easy to peel off, small bend radius, excellent resilient performance to meet stress and emergency. 1．Can choose flame-resistant or non-extend flame outer jacket, provide excellent safety protection.2....
The Spec Of Fiber Optical Cables : 1. Jye Kuano's fiber pigtail / patchcords and ultra reliable devices featuring.
2. low insertion loss and back reflection loss.
3. The fiber pigtail / patchcords come with your choice of simplex of duplex cable configurations and various types of pigtailing and connector terminations to meet your requirements. 1.....
The Spec Of Fiber Optical Cables : Application:
DVD, AMP, DAT player, WAN, limited internet internal cable, optical cable. 1. Insertion loss under 2db/M. 2. Support short distance communication, valid distance < 1K. 3. Rate Temperature: 0~70°. ....
The Spec Of Fiber Optical Cables : 1．Fiber optic audio optical cable for use dolby digital receiver, digital signal processor, DAT machines, divx player, DVD player, CD player, DSS receiver, DAT player/ recorder, MINI disc player/ recorder, sony playstation 2, XBOX, ALESIS, or any components that use normal full-size toslink connectors.
2．High per....
The Spec Of Fiber Optical Cables : These corrugated steel tape or aluminum tape armored optical fiber ribbon cables are suitable for installation in aerial or duct environment for communication between bureaus, metropolitan network, access network, especially suitable for the situation of high density fibers is expected. 1. Up to 420 fibers. 2. The ....
The Spec Of Fiber Optical Cables : Product description:
1. 02-12 fibers, Ф900μm tight buffer fiber, aramid yarn, PVC jacket.
2. 24-72 fibers, stranded structure, FRP strength member, 6-fiber subunit (Ф900μm tight buffer fiber, aramid yarn), PVC jacket.
3. Standard: YD/T 1258.4-2005, ICEA-596, GR-409, IEC 794. Part No. description: 1. 41004-....
The Spec Of Fiber Optical Cables : 1. The Fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable cor....
The Spec Of Fiber Optical Cables : Product description:
A short length of tight-buffered cable has optical connectors on both ends. The fiber connector type could be FC, SC, ST, LC and MTRJ; if no mentioned, it should be PC contact. If APC contact, the part number should suffix "-APC". Fiber type could be single mode and multimode also simple....
The Spec Of Fiber Optical Cables : Product Name: OPTICAL FIBER LC/PC-LC/PCDUPLEX SM 2.0mm 2M ....
The Spec Of Fiber Optical Cables : Product Name: OPTICAL FIBER ST/PC-ST/PCSIMPLEX SM 3.0mm 2M ....
The Spec Of Fiber Optical Cables : Product Name: OPTICAL FIBER LC/PC-LC/PCDUPLEX SM 2.0mm 2M ....
The Spec Of Fiber Optical Cables : MFOC’s optical closure are designed for use with any cable construction (loose buffer tube, central core tube, loose fiber, ribbon), in any environment (aerial, pedestal, buried, hand hole, manhole) and for numerous splice applications (expressed, tap-off, branch and repair). 1. Diameter: 540 mm.2. Length: 165 mm....
The Spec Of Fiber Optical Cables : Application for
1. Suitable for ducts and aerial.
2. Long distance communication system.
3. Local area network system.
4. Subsnber network system. 1. Suitable for aerial, pipeline laying method, long distance communication and WAN (wide area network).2. Excellent water-proof layer, good moisture resistance.3. C....
The Spec Of Fiber Optical Cables : 1. PC polishing or UPC polishing.
2. Low insertion loss.
3. High return loss.
4. Standard housing, ceramic ferrule.
5. Cable diameter: 3.0mm.
6. Connector type: SC(ST, FC, LC, MTRJ, MU, E2000 are also available).
7. Insertion loss: ≤ 0.3dB (UPC ≤ 0.2dB).
8. Return loss: PC ≥ 45dB (UPC ≥ 50dB).
9. Repe....
The Spec Of Fiber Optical Cables : Features:
Each simplex cable contains strength aramid yarn, high strdngth, good bending performance, nogel, easy to be spliced and operated on.
Each simplex with buffer design, independent strength member and sheath to event damage from environmental and mechanical stress.
Jacket is color varies according to the typ....
The Spec Of Fiber Optical Cables : Features:
Suited to SM fiber and MM fiber
Soft, easy to strip
High quality tight buffered primary coating optical fiber
Small bending radius, excellent mechanical and environmental performance Applications: Pigtails and patchcords of communication equipment Co....
The Spec Of Fiber Optical Cables : Application:
Optical access network (OAN)
Data prossing centers
Cable television (CATV)
Local area network (LAN)
Coarse wavelength division
Can be used in PLC system
FTTH Features: Removable panel design can meet different &nb....
The Spec Of Fiber Optical Cables : Features:
High strength aramid yarn strength member ensures high tensile strength and long term stable transmission for optical fibers.
Small outer diameter , lightweight, flame-retardant, easy to strip, low attenuation, physically soft.
Direct splicing between tight buffered cables without the need of t....
The Spec Of Fiber Optical Cables : Features:
Easy splicing, suitable for large capacity data transmission.
Flame-retardant (or combustion-discomtinued) property.
Outer jacket is color varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
....
