Select
The Spec Of Power Chokes : FEATURE:
1. High impedance for common mode noise and low impedance for differential mode signal.
2. Large rated current available.
3. Wide band or sharp type impedance cure available.
4. SMD or DIP available.
Applications: prevention of common mode noise on signal lines and power lines for computer related or el....
Select
The Spec Of Power Chokes : High maximum flux density, low cost and large energy storage capacity. The applications are conducted emi noise filters, pulse transformers, DC output/input filters, light dimmer chokes, power factor correction indcutors, continuous-mode fly-back inductors, output chokes for switching power supplies. 1. Inductance ....
Select
The Spec Of Power Chokes : Applications: USB3.0 CMM11 Impedance: 60-160 (Ω)IDC: 160~300mA (Max)RDC: 0.25~0.43Ω (Max) ....
Select
The Spec Of Power Chokes : 1. Application:
(1) Excellent as DC / DC converter boost or buck inductor.
(2) Also used for filtering application.
2. Feature:
(1) High rated current for circuit design.
(2) Design by special lead wire to prevent open circuit failure.
(3) Low cost with rugged reliability and performance fixed inductor. 1. Si....
Select
The Spec Of Power Chokes : Features:
SMD data line & ring filters are designed to virtually eliminate the problem of conducted EMI in data line applications.
APPLICATIONS:
‧DC/DC converter
‧Power suppliers for portable communication equipment.
‧Camcorder
‧LCD TV
‧Notebook computer Please refer to the attached file for....
Select
The Spec Of Power Chokes : SMD Molding Power Inductor PRJ042, Flat coil in Chokes. Low Profile, High Current Stand SMD Molding Power InductorLower DCR by Flat Wire4x4x2-Molding SMD Power InductorInductance:R22~5R6 ....
Select
The Spec Of Power Chokes : The SRIDB series has high common mode impedance in small size.
The SRIDB series is effective for common mode noise suppression in digital equipment which radiation is caused from cables. 1. Common mode impedance:
(1) 100MHz: 90ohm~500ohm.
(2) 300MHz: 250typ.~900typ.
(3) DCR: 0.10ohm~0.16ohm max. ....
Select
The Spec Of Power Chokes : 1. Based terminal are treated, allows mounting "as is", on a PCB.
2. Paired wire coil for high stability.
3. Applications: ideal use in double balance mixer and broad-band transformers. 1. Test Frequency 0.1~1MHZ, 0.1~1Vrms. 2. 40°C temperature rise.3. Operating temperature range: -40°C t....
Select
The Spec Of Power Chokes : Excellent DC-Bias Characteristics
-High Bmax of 15000 Gauss Compared to MPP or Ferites
-CoreLosses Significantly Lower than Iron Cores
-Large Energy Storage Capacity *Series: P*Product Name: High Flux Chokes*Type: Toroid*Inductance: 50uH~50mH*Size: 0321~5050Applications:*In-line Noise Filters*Switching Regulator....
Select
The Spec Of Power Chokes : FEATURE:
Special very Lowprofile and small size design, Wound chip construction with standard 0805 or 0603 size, with best EMI suppression effect at higher frequency 500MHz~up. And least impact to signal wave form.
APPLICATIONS:
Preventive measure against high speed signal radiation emissions such as USB 2.0, IEEE....
Select
The Spec Of Power Chokes : From big to small size SMD Design, Wire wound constructure common mode choke with best EMI suppression effect high impedance but very high rated current and low RDC.
APPLICATIONS:
-Preventive measure against common mode noise radiation emissions from power line or else.
-Best for high current circuit such as car, ....
Select
The Spec Of Power Chokes : FEATURE:
To be high saturation for surface mounting.
APPLICATIONS:
OA equipment, VTR, LCD television set, notebook PC, portable communication equipments DC to DC converters, etc. Please refer to the attached film. ....
Select
The Spec Of Power Chokes : FEATURE:
1.High impedance for common mode noise and low impedance for differential mode signal.
2.Large rated current available.
3.Wide band or sharp type impedance cure available.
4.SMD or DIP available.
APPLICATIONS:
Prevention of common mode noise on signal Lines and power lines for computer related or elec....
Select
The Spec Of Power Chokes : FEATURE:
1. Magnetically shielded construction.
2.Compact and thin.
APPLICATIONS:
Computers, DC to DC converter, VCR Camera. Please refer to the attached file.1. Other sizes are available upon request.2. All the data listed in this catalogue are for reference only, King Core reserves the right to alter or r....
Select
The Spec Of Power Chokes : FEATURE:
1. Open magnetic circuit construction.
2. High energy storage and very low resistance.
3.Compact and thin.
APPLICATIONS:
Excellent as DC to DC converter used in Notebook computers, PDA, Mobile phone, Step-down converters. Please refer to the attached file.1. Other sizes are available upon request.....
Select
The Spec Of Power Chokes : FEATURE AND APPLICATIONS:
1. Wide band EMI suppression effect
2. High Current rating
3. Compact and simple design with high reliability
4. Very good SMD solution for traditional wide band choke
Select
The Spec Of Power Chokes : Power choke is endowed with stocking and releasing overloaded electricity, with the quality of low resistance and stand high current, to prevent unstable current directly strikes the main parts on board. On the other hand, it still can be designed a resonant inductor to afford high power in low-profile size, applied in....
Select
The Spec Of Power Chokes : Features:
‧Based terminal are treated, allows mounting "as is",on a PCB.
‧Paired wire coil for high stability.
‧Coated with epoxy to with and 260℃ peak reflow temperature.
‧Optimized for transmission of high quality signals
APPLICATIONS:
‧LANs,telephones, Personal computers.
‧CD-ROM dr....
Select
The Spec Of Power Chokes : Applications: HDMI
DVI
Display port CMHD21 Impedance: 67~120ΩIDC: 250~400mARDC: 0.30~0.45Ω ....
Select
The Spec Of Power Chokes : Applications: USB line for personal computers and peripheral,
IEEE 1394 line for personal computers, DVC, STB.
LVDS, panel line for liquid display panels, graph card etc. CMM21 Impedance: 30~900Ω IDC: 80~450mA RDC: 0.20~0.60Ω CMM31 Impedance: 90~2200Ω IDC: 200~370mA RDC: 0.3~1.2Ω ....
Select
The Spec Of Power Chokes : 1. Feature:
(1) High current and inductance capacity.
(2) Specially designed for surface mounting.
(3) Equipment, good for high density application.
(4) Low profile very effective in space-conscious applications.
(5) Low resistance and high-energy storage.
2. Application: power supply for VCR, OA equipment, LCD T....
Select
The Spec Of Power Chokes : QPCR:
1. Feature:
(1) Excellent soldeability and heat resistance.
(2) Excellent terminal strength.
(3) Packed in embossed carrier tape.
(4) Can be used by automatic mounting machine.
(5) Available in various sizes.
(6) Easy to customized.
2. Application: power supply for VCR, OA equipment, LCD TV,
notebook PC,....