The Spec Of Air Power Tools : 1. High speed, micro stroke(0.15mm) and low vibration.
2. It suits for details and corner area＇s lapping.
The Spec Of Air Power Tools : The item is suitable for following operation:
1. Vehicle plating: rough rubbing before mending the surface; the operation with plume forms after rubbing and grinding.
2. For wooden products: table, chair, sideboard, bed, cheat of drawers etc.
3. For plastic products: clear finish of round and curved surface, deburri....
The Spec Of Air Power Tools : 1. Power output: 450w.
2. Amp: 4.3A.
3. Chuck capacity: 13mm.
4. In wood: 30mm. 1. In steel: 13mm.2. R.P.M: 1,250.3. Net weight: 3Kg.4. Cord lengh: 2.5m(8.2"). ....
The Spec Of Air Power Tools : 1. Product Introduction
2. Specifications: PC PLASTIC BODY W/4 BITS SCREW DRIVER & 8/10mm WRENCH(PH#2.3, HEX #4, FLAT#7)
3. Material: PC SCREW DRIVER FOR SNOWBOARD, BIKE, AND SKATE BOARD USE. ....
The Spec Of Air Power Tools : Portable air atomization spray gun:
1. Light weight: only 346g, workers aren't tired whole day.
2. Professional: provide uniform atomizing effect on production line, and offer factories the best efficiency.
3. Bore of Nozzile(mm): O0.5, O0.8, O1.0, O1.4, O1.8.
4. Air cap: (M) high atomizing pattern, (E) normal....
The Spec Of Air Power Tools : 1. Suitable For Work :woodware、wall、table、floor、car、furnithre、tools、windows
2. Work with turbine machine
The Spec Of Air Power Tools : *Patented
*Two-value display for in-lb and Nm.
*Accuracy : ±6 %
*Soft grip handle manufactured from TPR for comfortable use.
*Audible click at achieved torque w / automatic reset.
*Persistent fastening for quality control. - Range:3.4 Nm to 7.9 Nm (30 to 70 in-lbs)- An assembly 1/4" tetragonal adapter ....
The Spec Of Air Power Tools : *Product Name: 1/2" Sq. Dr. IMPACT WRENCH (PIN CLUTCH)
*Model: AT-8113-P * Bolt capacity… 5/8" ( 16 mm )* Max torque… 450 ft-lb (62 kg-m, 610 N-m )* Free speed… 7000 r.p.m.* Air consumption (cfm)… 12* Air inlet (PT)… 1/4"* Air pressure… 90 psi* Net weight&he....
The Spec Of Air Power Tools : 1. Powerful Output (0.6 HP), the general output as this kinds of tools is around 0.3 HP.
2. The handle is ergonomically designed with good touch feeling and skid-proof effect.
3. Speed could be adjust.
4. 360 degrees adjustable exhaust type design.
5. The handle material characteristics almost unchanged and it coul....
The Spec Of Air Power Tools : *Model No. HEC-S55 (with Ni-MH Battery & Charger)
*Model No. LEC-S55 (with Li-ion Battery & Charger)
*Cuttering Capacity:
-Max. Pressure: 700 bar
-Oil Required: 88.6 cc
-Crimping force : 12.7 tons / 124.46 KN
-Wire rope 6x7: 25 mm
-Wire rope 6x12: 30 mm
-Wire rope 6x19: 30 mm
-Soft steel bar: 22 mm
....
The Spec Of Air Power Tools : We supply our best quality products and on time delivery to meet your requirement. We offer customized products to meet customers’ requirements. ....
The Spec Of Air Power Tools : 1. 1/2" H/D air impact wrench (pin clutch).
2. Max. torque: 320 FT-LB. 1. Square drive: 1/2".2. Cap. bolt size: 5/8" (16MM)3. Net weight: 5.4 lb (2.5kg).4. Overall length: 7 1/2"(190mm)5. Avg. air consumption: 8 CFM.6. Air inlet: 1/4"(PT).7. Air hose: 3/8"(I.D.).8. Free speed: 7.000 ....
The Spec Of Air Power Tools : Obtain optimum vacuum with this venturi powered system.
1. Commercial vacuum generator, up to 23" hg vacuum.
2. Heavy duty 0.02" mil thick PVC vacuum bag 24" x 24".
3. Air consumption: 125 C.F.M. continuous at 115 PSI. 1. (VCS1) 12" X 12".2. (VCS2) 24" X 24". ....
The Spec Of Air Power Tools : 3/8" pin clutch mechanism air impact wrench. 1. Square drive: 3/8". 2. Cap.bolt size: 1/2",(13mm). 3. Net weight: lbs: 3.23 lbs (1.47kgs). 4. Overall length: 6 1/2" (165mm). 5. Avg.air consumption-5.3 cfm. 6. Air hose (i.d.): 3/8". 7. Air inlet: 1/4" (pt). 8. Free speed: 10.000 rpm.9. ....
The Spec Of Air Power Tools : * Max Torque: 13N.m
* Max. Blend Diameter: 60mm
* Certification: GS/CE/EMC Voltage: 12VBattery Capacity: 1.3Ah No Load Speed: 0-500RPM ....
The Spec Of Air Power Tools : 1. Special design for low noise low vibration.
2. Patented 360o adjustable air exhaust port. 1. Free speed: 2,000rpm. 2. Hose size: 1/4". 3. Air inlet: 1/4" -PT. 4. Air pressure: 90psi. 5. Avg. AIR Cons.: 5cfm. ....
The Spec Of Air Power Tools : The most powerful industrial air saw for clean, burr-free cuts with standard hacksaw blades in serving a wide range of industries and emergency services where reliability and durability are really matter such as petrochemicals, oil rigs, power stations, public transport facilities, coal mines, fire brigades,etc. 1.....
The Spec Of Air Power Tools : Product Feature
*Spray distance:200mm.
*Paint viscosity: 20sec./RV-2.
*Nozzle and needle are made of heat treated material with the character of high hardness, antiwear so as to lengthen in-service life.
The Spec Of Air Power Tools : This tool has been designed to efficiently and quickly cut pipe range 16mm-34mm with pipe thickness up to 1.5mm.
The cutter is equipped with a reamer on the left side of the tool housing. Reaming is essenial after the cut is made in order to produce a tubing free of sharp burrs.
The Spec Of Air Power Tools : 15 degree angle adjustable suction lifter with ratchet tie down. 1. Accessory for suspending poster rails from windows or similar glass/acrylic surfaces. 2. Universal suction mounted banner and light-weight sign holder for glass and other smooth, non-porous surfaces. 3. Perfect for indoor and outdoor applications.....
The Spec Of Air Power Tools : 1. High-Functional Non Carbon-Brush Motor adopted, marvelous life and strong durability can be owned and repair & maintenance almost become needless.
2. Smaller size, light weight, low noise-pollution, fashionable design, high stability and easy operation. Motor, since much free from repair& maintenance, is be....
The Spec Of Air Power Tools : 1. Operating Air Pressure: 90 psi , 6.3 kg/cm²
2. Packing Pcs/N.W/G.W/Cut (kg): 20/Ctn/18 kg /1.33’
3. Sug. Air Comp. (HP): 2(HP)
The Spec Of Air Power Tools : 1. 2,400 rpm/0.25 hp geared, powerful rotary motor.
2. The bearing is dustproof designing, can effectively lengthen bearing lifespan.
3. Durable, lightweight and ergonomic composite design.
4. Lower body position to make stable fit to the work area.
5. Low vibration for long time operation without weary.
6. E....
The Spec Of Air Power Tools : An ideal item for industrial use. 1. Oscillation per: 0-20000 rpm.2. Stroke arc: 3 degree.3. Air inlet: 1/4".4. Air pressure: 90 psi.5. Air consumption: 350 L/min.6. Net weiht: 1.0kg.6. Overall length: 180mm.7. Exhaust system: rear. ....
The Spec Of Air Power Tools : Suitable for motor, electronic and computer purpose. 1. Item No.: NT-125. 2. Terminal type: for non-insulated terminal. 3. Wire range: (1) UL (guage): 22-16. (2) DM (mm3): 1.5. ....
The Spec Of Air Power Tools : 1. World's Only Dual-piston Grease Gun
2. High torque & high output
3. Start up with 1HP compressor.
4. Min inlet pressure & Max output volume. 1. Grease output pressure: 6000 PSI/413 bar (factory preset).2. Grease reservoir capacity: 14 oz. (400cc/397g) cartridge or 16 oz. (500cc/454g) bulk.3. Pneum....
The Spec Of Air Power Tools : 1. Product name: carton sealers pneumatic. 1. Magazine capacity: 100 pcs.2. HxLxW: 220 x 415 x 115 mm.3. N.W.: 2.65 kgs. ....
The Spec Of Air Power Tools : 1. H950W spray gun is used to dry applied water and solvent based
2. Paints rapidly by blowing air at the painted or coated surfaces.
3. H950W spray gun is useful for blow-drying small areas. 1. Maximum inlet pressure: 10 bar (145psi).2. Working pressure: 3-6 bar (43-87 psi).3. Air consumption: 12.3 cfm (350l/mi....
The Spec Of Air Power Tools : This electronic spray gun has a small, yet powerful motor, making it easy to carry and operate. 1. Air pressure: 3 - 4bar2. Glue degree: 16 - 20U3. Max. fluid delivery: 200cc/min4. Normal voltage: 120V / 230V5. Unload speed: 35,000 / 38,0006. Unload current: 1 / 27. Load speed: 28,500 / 27,8008. Load current: 2.1 /....
The Spec Of Air Power Tools : Air Power Tools Air Power Tool
M1*17T*12T M1.1*57T*8T M1.5*24T*17T
M1*18T*14T M1.2*38T*12T M2*20T*13T
M1*33T*8T M1.3*23T*18T M2*13T*7T
M1*40T*12T M1.4*40T*12T
M1.1*51T*8T M1.4*43T*12T ....
