The Spec Of Saw Manufacturers : 【STANDARD FEATURES】
1.United Contruction-(Bar feed and saw are on one base).
2.Shuttle type automatic feed.
3.P.L.C. control for all electric and hydraulic function.
4.Hydraulically controlled dual vise clamping system.
5.Floating shuttle vise system.(Except S-250HA)
6.Split front vise.
7.Infinitely variab....
The Spec Of Saw Manufacturers : 1. Net Weight: 0.75 kg.
2. Handle Diameter: 39 x 37 mm.
3. Avg. Air Cons.: 0.28 m³/min. 1. Air Pressure: 6.3 kg/cm²(90 psi).2. Stroke: 7 mm.3. Stroke Speed: 6500 spm/min.4. Cutting Capacity: 1 mm iron pate: 900 mm/min. 3mm Iron:135 mm/min 5. Saw Blade: 32 teeth/inch.6. Tool ....
The Spec Of Saw Manufacturers : Applicable Machinery :Traditional Lathe & CNC
Applicable Industry :3C, Mold and Die, Automotive
End mill Features :High Accuracy and Best Quality of Saw. Sutible for Cutting Any Kinds of Materials.
The Spec Of Saw Manufacturers : 1. Power input: 480w.
2. Amp: 4.2A.
3. In wood: 85mm.
4. In steel: 8mm.
5. R.P.M: 600~3,000.
6. Net weight: 2kg.
7. Cord lengh: 2.5m(8.2"). We can produce any sizes and styles as your requests, welcome OEM. ....
The Spec Of Saw Manufacturers : 1. Application for woodworking.
2. We can provide depend on the specification size, color that customer specify, draw a design the manufacture again. It’s Sampo’s specification: 1. Motor: 3HP(or5HP) single phase.2. Blade speed: 3700 feet per minute.3. Blade length: 177".4. Blade Capacity: from 3/8....
The Spec Of Saw Manufacturers : APPLICATION:
- The protecting cover (s.s.) can be lengthen and shorten and also can reach to far place.
- Non-slip design inside and outside of handle.
- It will not slip out of the joint when it's used.
- The hand saw can be replaced by normal saw blade. THE OPERATING INSTRUCTIONS OF REPLACE 6" RECI-....
The Spec Of Saw Manufacturers : * Blade 13" (330mm)×1.0mm (T), High carbon steel blade, lacquered, file teeth, impulse-hardening teeth.
* Handle: Iron tube with TPR handle (black color) * Size: 13" (330 mm) ....
The Spec Of Saw Manufacturers : 1. Perfect for both contractors and remodelers, our saws are built tough yet light for ease of movement to any job site. Every design detail was considered to maximize rigidity, strength, and reliability while minimizing weight.
2. One example of our engineering was the use of an AC induction motor instead of the nois....
The Spec Of Saw Manufacturers : Patented products(GS/VPA). 1. Sizes: (1) 15" 380mm. (2) 20" 500mm. (3) 22" 550mm. (4) 24" 600mm. 2. Material: SK5. ....
The Spec Of Saw Manufacturers : 1. Number of rails: 2.
2. Width of cut: 280- 1200mm.
3. Length of cut: 540mm.
4. Sawblade dia.: (optional) 10" - 12" (Ø25.4mm).
5. Sawblade motor: 2HP x 4.3HP x 2.
6. Molding spindle dia.: 25.4 or 30mm.
7. Length of cutter: 80 or 100mm.
8. Molding spindle motor and speed: 3HP x 2, 7000R.P.M..
9. Saw....
The Spec Of Saw Manufacturers : Air Body saw is designed to cut the autobody plate, and also for another metal material like Alu. plate or bar.
Safe labor and easy to operate. 1. Air body saw.2. Cutting capacity: 2mm (steel), 3mm(alu).3. Stroke length: 3.8" ( 9.5mm).4. Stroke per minutes: 10,000 bpm.5. Air cons.: 6 cfm ( 170 l/min ).6. Net ....
The Spec Of Saw Manufacturers : Erogonomic grout saw:
1. Easily strips, cleans and removes old floor and wall tile grout.
2. The blade's abrasive edge is made from tungsten carbide grits.
3. Tungsten carbide is a chemical compound that stays sharper, up-to 20 times longer than most other materials and is therefore ideal for grout removal.
The Spec Of Saw Manufacturers : Application on most metals including unhardened tool steel and stainless steel.
The Spec Of Saw Manufacturers : •Equipped with a 1.5HP motor for heavy duty cutting.
•Ruggedly constructed saw carriage provides maximum cutting stability.
•Heavy, precision-machined trunnion ensures accurate saw tilting.
•Fence locks securely and precisely parallel to the sawblade.
•Durable sawblade guard for operator safety.
•Butto....
The Spec Of Saw Manufacturers : 1. Great for PVC, ABS, PE pipes and other plastics, also for plywood, particle board, bamboo etc. Especially for plumbers and electricians.
2. High quality flexible & durable thin blade produces clean, accurate and controlled cuts.
3. Diamond ground and impulse hardened teeth for longer and superior cuts.
4. ....
The Spec Of Saw Manufacturers : 1. Drive system:
(1) Transmiss and tube: rigid / aluminum Ø 26 mm x 1500. mm / extension shaft length= 650 mm.
(2) Handle type: D - loop with bar.
(3) Throttle lever: trigger switch type.
2. Cutting attachment:
(1) Bar & chain brand: carlton.
(2) Chain oil capacity: 190 c.c.
(3) Oiling system: automatic.
The Spec Of Saw Manufacturers : 1. Aftermarket piston and cylinder kit.
2. Piston assy.
3. Piston ring. Cylinder assy: 52mm. ....
The Spec Of Saw Manufacturers : New Generation Thin Cutting
EXTEND LIGHT MACHINERY CO., LTD. specializing in the production - a high performance frame saw, the whole series models are equipped with an exclusive patented synchronous servo feed system, can achieve the perfect low-loss high sawing process, the application of industrial branched out int....
The Spec Of Saw Manufacturers : 1. Bevel positive stops: 0, 45, 90 degree
2. Miter positive stops: 90 degree, 45 degree Left and Right.
3. Wood table: 700 x 900 mm
The Spec Of Saw Manufacturers : ‧Dual pilot drill For drilling fast, and prevent to accumulate the chips.
‧Slant tungsten steel designed for drilling faster and quicker. Provide 50% efficient more than standard types. And the hole is very beautiful.
The tungsten steel hole saw for door lock. The new Slant Tungsten cutting edge is very durab....
The Spec Of Saw Manufacturers : 1. Use: can get down coping saw frame and replace keyhole saw blade become to another function saw.
(1) Saw all angles, rubber tubes, angle iron, and aluminum tube.
(2) Saw small branch, plywood, hard wood, wet wood, dry wood and gypsum.
2. VPA/GS approval; with worldwide patents. 5-in-1 multi-function saw se....
The Spec Of Saw Manufacturers : Coping Saw TS03-3150M Coping Saw
*TUNGSTEN CARBIDE SAW
*6" CUTTING DEPTH
*FOR CUTTING HARD TO REACH ANGLES
AND CIRCLES IN ALL TYPES OF MASONRY AND TILE
*PLASTIC HANDLE
*NICKEL-PLATED FINISH/BLACK OXIDE FINISH
Packing : 1pc/bulk packing ....
The Spec Of Saw Manufacturers : High tension hacksaw W/12 1. Color sleeve.2. 6Pcs/inner box 36Pcs/CTN.3. N.W.=20.5Kgs G.W.=21.5Kgs.4. CUFT=2.25’. ....
The Spec Of Saw Manufacturers : 1.Chrome Plated Tubular Frame.
2.Die-Cast Aluminum handle.
3.45°Mounting Pins For Flush Cutting.
4.30000psi. 1.For250mm And 300mm Blades. 2.0.6KG. ....
The Spec Of Saw Manufacturers : Pruning saw with sheath:
1. Triple ground tooth form.
2. High carbon steel - induction hardened teeth.
3. Fine tooth gives smooth cut. 1. Suitable for all non metallic materials. PVC pipe etc.2. Soft grip - changeable blade.3. 250mm Pruning saw with sheath ....
The Spec Of Saw Manufacturers : Quickly folds for easily carrying the saw and removes for bench mounting:
120V/230, 15A/7.5, 5000 rpm motor - 5/8" arbor; built-in arbor lock. Electric blade brake. 1. 0°, 22-1/2°, 31.62° and 45°, right and left, positive miter stops.2. 11-1/2" maximum cut width at 90° - 8" at 45....
The Spec Of Saw Manufacturers : The stylish POS-3100 features the anti-scratch Surface Acoustic Wave (SAW) touch panel which ensures fast and accurate responses during the 24/7 operation. It is a value-added POS terminal with numerous processor options, ranging from Celeron M, Intel Atom, Core Duo to Core 2 Duo.
The front bezel has a matte textur....
The Spec Of Saw Manufacturers : 1. 4,800 strokes per minute.
2. Cuts all types of aluminum, plastics, fiberglass, sheet metal, up to 16 gauge.
3. Light weight & versatile design cuts curved surfaces and tight circles with ease.
4. Complete with 5 each 32T & 24T saw blade and 5 pc file set 4mm round. 1. Cutting capacity steel 1.6 mm ....
The Spec Of Saw Manufacturers : ◦British technology.
◦Patented automatic core ejection.
◦Patented reverse spiral lubrication system.
◦New patented diamond coating producing an exceptional fine finish.
◦Precise graded diamonds with a new metal / diamond bond for faster cutting, longer lifetime and much less vibration.
◦D-Power product....
The Spec Of Saw Manufacturers : ◦Ideal for soft and wet wood cutting.
◦Round /oval tube available, with HCS blade.
