The Spec Of Actuator Manufacturers : Product: Ball Screw Linear Actuator For relevant specifications, please refer to our website. ....
The Spec Of Actuator Manufacturers : Material: Housing is made from aluminum alloy and S41C. Internal gears are made from SMF5030.
The Spec Of Actuator Manufacturers : RE-M series linear actuator is designed for use in the furniture, rehabilitation and hospital bed industry. This actuator is also used in agricultural machinery and for a wide range of industrial. Input: 12V/24V/36V/48VDC Load Capacity: 2000N, 4000N, 6000N, 7000N, 8000N Speed: 4-36mm/s, 4-100mm/s, 18-36mm/s, 11-36m....
The Spec Of Actuator Manufacturers : 1. Power plant.
2. Water treatment.
3. Damper control equipment.
4. Refrigerating, air- conditioning system.
5. Air transfer equipment.
6. Food industry.
7. Petro-chemical industry. 1. Standard: (1) Watertight IP 65. (2) Torque switch can activate torque: switches to provide overload protection. (3) Mechanica....
The Spec Of Actuator Manufacturers : 1. Failsafe Backup Battery installed on UM1-UM4 Series.
2. UM/R series is low power consumption, High torque electric actuator.
3. With seamless shell and IP67 rated waterproof enclosure, able to install on every outdoors environment.
4. Smooth Opening speed, effectively to avoid water hammer and increase pipeline l....
The Spec Of Actuator Manufacturers : 1. Various agricultural machinery.
2. Various equipment that need to lift up a load: such as medical instruments and vehicular installations. 1. Various constructions used for hanging a load: such as lightweight hoisting machines. 2. To be used under undesirable weather conditions: waterproof, dustproof. 3. Please....
The Spec Of Actuator Manufacturers : PC, vertical and right angle terminations. Snap-in front panel mounting available. 1. Contact rating: 1A@120 VAC or 28 VDC; 0.4VA max@20 VAC or DC max.
2. Electrical life: 30,000 make-and-break cycles at full load.
3. Contact resistance: 20 mΩ max. initial @2-4 VDC,100 mA.
4. Insulation resistance: 1,000 MΩ ....
The Spec Of Actuator Manufacturers : This is the result of the Geko Fluid Control GmbH mission to offer always innovative products by combining the long field experience as market leader, the innovational spirit, the well-known reliability in actuators design and the high quality manufacturing level.
The new technical features developed and incorporated....
The Spec Of Actuator Manufacturers : The Base Plates(Manifold) for Modular Valves have standardized mounting surface conforming to ISO 4401 and optimum thickness for each size. Any hydraulic circuits can be easily composed by stacking the valves with mounting bolts. The Base Plates(Manifold) for Modular Valves can be used widely for hydraulic systems for ....
The Spec Of Actuator Manufacturers : 1. The CAL12 series have 12mm diameter with a stroke length of 10mm.
2. They are offered with minimum force of 0.2N and maximum force of 2N, and a choice of encoder resolutions from 5 micron down to 100 nanometer to satisfy a variety of industrial, scientific, motion control & QC / measuring applications.
3. As ....
The Spec Of Actuator Manufacturers : General Ball Screw Supported Unit For relevant specifications, please refer to our website. ....
The Spec Of Actuator Manufacturers : General Fixed Side Series Ball Screw Support Unit For relevant specifications, please refer to our website. ....
The Spec Of Actuator Manufacturers : Ball Screw Support Bearing Unit For relevant specifications, please refer to our website. ....
The Spec Of Actuator Manufacturers : Ball Screw Support Bearing Unit For relevant specifications, please refer to our website. ....
The Spec Of Actuator Manufacturers : Ball Screw Support Bearing Unit For relevant specifications, please refer to our website. ....
The Spec Of Actuator Manufacturers : General Fixed Side Series Ball Screw Support Unit For relevant specifications, please refer to our website. ....
The Spec Of Actuator Manufacturers : Product: Ball Screw Linear Actuator For relevant specifications, please refer to our website. ....
The Spec Of Actuator Manufacturers : - Robust construction, precise positioning, reliable performance
- Wide range of applications & control systems
- Compact internal arrangement
- Modulating control options can be installed on the site
- Local control options for easy commissioining and emergency operation
The Spec Of Actuator Manufacturers : TORQUE OUTPUTS
*DOUBLE ACTING: 830-250000Nm
*SPRING RETURN END TORQUES:3307-71764Nm OPERATING TEMPERATURES:STANDARD:-20℃-80℃LOW TEMPE RATU RE:-40℃-80℃HIGH TEMPERATURE:-20℃-120℃OPERATING PRESSUREPNEUMATIC:3-7 BARHYDRAULIC:100 BAR ....
The Spec Of Actuator Manufacturers : The CA range of electric cylinders have been designed with the most demanding of automation tasks in mind and are the first real linear motors to challenge pneumatic devices. The offer long life and much more precise and repeatable force control and positioning than conventional pneumatic devices. The conventional shap....
The Spec Of Actuator Manufacturers : 1. Over 10,000 units sold.100 million life cycle without maintenance.
2. Reliability:
(1) Sold more than 10,000 units.
(2) 100 million+ life cycle.
(3) Linear (moving coil) & rotary (brushless motor) actuator.
3. Precise force control:
(1) Resolution: 5µm standard (1, 0.5 & 0.1 µm option).
(2) Fo....
The Spec Of Actuator Manufacturers : 1. SMAC grippers find use in many markets, one of their key features being the ability to independently control each jaw. The soft-land technique ensures that fragile components are not harmed.
2. The diminutive GRP17 is the smallest gripper yet. 1. Voltage: 24. 2. Amps, total: 3. 3. Weight (kg): 0.25. 4. Size (m....
The Spec Of Actuator Manufacturers : Sealed construction.
Ultraminiature size.
Used in PLC products. 1. Contact rating: 0.4 VA max @ 28 VDC.
2. Electrical life: 10,000 make-and-break cycles at full load.
3. Contact resistance: 100mΩ max initial @2-4 VDC, 100mA.
4. Insulation resistance: 500MΩ min.
5. Dielectric strength: 250 VAC, 50 Hz for t....
