The Spec Of Hydraulic Solenoid Valves : Solenoid valve (PS520 series): aluminum alloy body. Connection between base and body is identical to ISO 1 & ISO 2. 1. Model: PS520F-02-S, PS520F-02-D, PS520F-03(4)-S, PS520F-03(4)-D. 2. Port size: 1/4", 3/8" (1/2"). 3. Fluid: compressed air (filtered through 40µ filter elements). 4. Sectio....
The Spec Of Hydraulic Solenoid Valves : 1. Adoption of high efficiency pilot valve.
2. Easy arrangement for pilot and drain method.
3. Based on ISO standards, interchangeable with other makers.
4. Directional control valves. 1. Gasket mounting.2. Nomina dia.: 04:3/4"3. Spring function: (1) C: spring centered. (2) B: spring offset type.4. Voltage:....
The Spec Of Hydraulic Solenoid Valves : Besides the use of the standard 2-position valves aforementioned in the list of standard models and maximum flow, the 3-position valves also can be used as the 2-position valves using the two of their three positions. In this case, there are two kinds of the valve available. One is the valve using the neutral position ....
The Spec Of Hydraulic Solenoid Valves : 1. Normally closed. Screwed end.
2. For steam, air, heavy oil, water. Mit-UNid-cns brand or UNi-d brand. Mit-UNid-cns brand or UNi-d brand: 1. BSPT, NPT, BSP. AC 110v/220v, dc 24v. 2. Size: 1/2”~2”. 3. Press: 0.5-15 kgf/cm2. 4. US series is multiplex-drive, piston guide, and conductive normal close. 5.....
The Spec Of Hydraulic Solenoid Valves : Based on standard, the same GEKO multifunctional Flameproof solenoid valve apply the requirements for NAMUR and in-line(pipe) connection and can be adapted for 3/2 NC or 5/2 functions for controlling double-acting and single-acting pneumatic actuators without any adaptor in HAZARDOUS area (Ex d IIC T6). Armed with &quo....
The Spec Of Hydraulic Solenoid Valves : 1. Increasing the size of the ditches in main body to raise the flow and the pressure.
2. Using the newest CNC precise lathe to make sure the spools size and no right angle to decrease the happening of cutting angle or slip resistance.
3. To lower inter resistance.
4. Huge increasing of backpressure allowable.
5 . ....
The Spec Of Hydraulic Solenoid Valves : *Miniature and compact size; quick response; lubricant free.
*Plug with standard JPC design (with LED). Built-in surge protection and nonpolarity design efficiently reduce possibility of short circuit.
*Low power consumption 0.8W.
The Spec Of Hydraulic Solenoid Valves : 2/2 way brass direct acting solenoid valves: ow starting pressure 0.5kgf/c㎡. Suitable for large flow rate and higher pressure. Stainless steel armature provides exceptional durability. Flange and ex-proof coil T4 are optional. Please install horizontally 1. Model: PU225A-03, PU225A-04, PU225A-06, PU225A-08, PU225....
The Spec Of Hydraulic Solenoid Valves : 3/2 way direct solenoid valve: PU320 solenoid valves is available as single station units, or assembled as a stack. To stack this valve, tie-rod mounting kit including tie-rod nuts & o-rings & a plug are required. 1. Model: PU320-01-S, PU320N-01-S, PU320-02-S, PU320N-02-S.2. Port size: 1/8", 1/8",....
The Spec Of Hydraulic Solenoid Valves : 2/2 way anti-acid & alkaline valve: direct acting for fast response. Suitable for acid or alkaline chemical fluid. Fluid should keep in liquid status. Please install horizontally. 1. MODEL: PE220-03, PE220-04. 2. Port size: 3/8", 1/2". 3. Fluid: pure water, chemical acid. 4. Orifice: 5mm. 5. Operation....
The Spec Of Hydraulic Solenoid Valves : Suitable for steam fluid and has big flow rate. Stainless steel armature provides exceptional durability. Flange and ex-proof coil T4 are optional. Please install horizontally. elements), hot water, steam. 4. Orifice: 13mm, 13mm, 25mm, 25mm. 5. Cv value: 4.5, 4.5, 12, 12. 6. Section area: 88mm², 88mm², 23....
The Spec Of Hydraulic Solenoid Valves : 2/2 way stainless steel pilot acting solenoid valve: low starting pressure 0.5kgf/c㎡. Suitable for large flow rate and higher pressure. Stainless steel armature provides exceptional durability. Flange and ex-proof coil T4 are optional. Please install horizontally. 1. Model: SPU225A-03, SPU225A-04, SPU225A-06, SPU....
The Spec Of Hydraulic Solenoid Valves : 1. Compact size 18mm width.
2. Aluminum alloy body.
3. NBR seal for low friction.
4. Offering manifold for stack. 1. Model: AM520-01-S, AM520-01-D, AM530-01-D. 2. Port size: 1/8"PS or NPT. 3. Fluid: compressed air(filtered through 40μ elements). 4. Sectional area: 11m㎡. 5. Operating: inner pilot. 6. Pr....
The Spec Of Hydraulic Solenoid Valves : 1. Terminals type coil.
2. Extra compact 10mm size with excellent flow.
3. Aluminum alloy body provides a long durability.
4. Fast response, low start pressure. 1. Model: PM521-M3-S, PM521-M3-D. 2. Port size: M3. 3. Fluid: compressed air. 4. Sectional area: 1.0m㎡. 5. Operating: air pilot. 6. Pressure range: 0.....
The Spec Of Hydraulic Solenoid Valves : 1. Flying lead and Din connection are available.
2. Extra compact 15mm width with excellent flow(0.25Cv).
3. Aluminum alloy body with anodizing for durability.
4. One-touch override for non-locking action.
5. Provide single sub-base in M5.
6. Provide manifold for stack, maximum 16 stations. 1. Model: PU521A-M5....
The Spec Of Hydraulic Solenoid Valves : 1. SUS316 stainless steel body and spool for duribility and long life.
2. Suitable for harsh working enviroments like outdoor and chemical facility.
3. 5/2 & 5/3 way as well as different ports size for selection. 1. Model: SPU520-02, 03, 04S/D. 2. Port size: 1/4", 3/8", 1/2". 3. Sectional area:....
The Spec Of Hydraulic Solenoid Valves : 1. 2/2 WAY SOLENOID VALVE Brass series, Direct acting
2. Port size:PS3/8, PS1/2, PS3/4, PS1
3. Quick response
4. Stainless steel stem provides exceptional durability
5. Flange type is available for JIS 10K, ANSI 150LB and PN16.
6. Ex-proof coil T4 as optional accessory
7. Timer for setting on/off time as optional....
The Spec Of Hydraulic Solenoid Valves : * Direct acting
* Quick response
* Timer for setting on/off time as optional accessory
* Ex-proof coil is available
The Spec Of Hydraulic Solenoid Valves : ‧Quick acting agile response.
‧Plug with standard JPC design (with LED).
Built-in surge protection and nonpolarity design efficiently reduce possibility of short circuit.
‧Low power consumption 0.8W.
The Spec Of Hydraulic Solenoid Valves : Solenoid Controlled Relief Valves is your Relief Valve to go.
The Spec Of Hydraulic Solenoid Valves : 1. Low pressure drop.
2. Can be controlled by wet type electro magnetically, and piloted moving by oil pressure.
3. Can be simple and easy change the types of piloting and draining.
4. Designed by slippery spool, that can be operated under the condition of high press and large flow.
5. Only need general purpose....
The Spec Of Hydraulic Solenoid Valves : 1. Increasing the size of the ditches in main body to raise the flow and the pressure.
2. Using the newest CNC precise lathe to make sure the spools size and no right angle to decrease the happening of cutting angle or slip resistance.
3. To lower inter resistance.
4. Huge increasing of backpressure allowable.
5 . ....
The Spec Of Hydraulic Solenoid Valves : 1. Low pressure drop.
2. Can be controlled by wet type electro magnetically, and piloted moving by oil pressure.
3. Can be simple and easy change the types of piloting and draining.
4. Designed by slippery spool, that can be operated under the condition of high press and large flow.
5. Only need general purpose....
The Spec Of Hydraulic Solenoid Valves : 1. Adoption of high efficiency pilot valve.
2. Easy arrangement for pilot and drain method.
3. Based on ISO standards, interchangeable with other makers. 1. Nominal dia: 3/4’’.2. Maxi. pressure: 210 kgf/cm².3. Maxi. flow (l/min): 300 (3C:150).4. Pilot pressure: 4.5-210 kgf/cm².5. Allowable b....
The Spec Of Hydraulic Solenoid Valves : 1. Low noise with high characteristics.
2. Switching of the solenoid valve enables the circuit unloading.
3. Wild flow rate range enables the pressure control more stable and has also function of unloading valve. 1. Maximun pressure: 250 kg/cm².2. Connecting: 3/8’’ PT.3. Maximun flow: 100 lpm.4. ....
The Spec Of Hydraulic Solenoid Valves : 1. Normally closed. Screwed end.
2. For steam, water, air, light oil. Mit-UNid-cns brand or UNi-d brand. Mit-UNid-cns brand or UNi-d brand: 1. BSPT, NPT, BSP. 110v/220v, dc24v. 2. 1/8"~1/4" (0-7k), 3/8" (0-10k). 3. 1/2"~2", (0.5~10 kgf/cm2). 4. Temp.: -5~185℃. ....
